Nila Varsa V2 Deluxe Daylight Kit

The light draws just 75W and features flicker-free dimming to 5000 fps at any light intensity setting from 100 to 0%. Dimming is of course, easily accomplished locally on the fixture, but it can also be done remotely from a console via onboard DMX. An added feature of the V2 is its IP65 weatherproof rating making the light more than up to the challenge of wet climates. The power factor-corrected Varsa V2 uses proprietary technology to make it more power efficient, ensuring that its actual power usage is closer to its rated power draw than an uncorrected fixture. The light is ready for worldwide use thanks to its 100-240 VAC power supply.

Nila 4-Leaf Barndoor Set for Varsa V2

The Nila 4-Leaf Barndoor Set for Varsa V2 LED Light mounts to the front of the Varsa V2 fixture, allowing you to control and contour its light output. By swinging one to four leaves into the path of the light`s beam, you can illuminate areas that you want to light and keep light from areas that you don`t want lit. An enhanced design provides stronger hinges.

Nila CTO Gel Set for Varsa V2 LED Light

The CTO Gel Set for Varsa V2 LED Light from Nila is designed to lower the Kelvin temperature of the Varsa V2 daylight fixture. The set includes 1/8, 1/4, 1/2, and Full CTO amber filters. The 1/8, 1/4, and 1/2 CTO filters offer partial conversion of the light output, while the Full CTO providescomplete conversion of the Varsa`s approximately 5600K daylight balance to an approximately 3200K tungsten color temperature.

Nila 10-Pocket Nylon Pouch for Varsa

The Nila 10-Pocket Nylon Pouch for Varsa is a custom-sewn lens pouch that houses all gels & holographic lenses included with your Varsa Deluxe Kit. The pouch offers 10 pockets in total, 6 for holographic lenses and 4 for CTO or CTB color gels. There is also a business card slot on the front of the pouch to help identify your kit in case it is misplaced on location.

Nila Narrow Spot Holographic Film Lens for Varsa V2 Fixture

This Narrow Spot Holographic Film Lens from Nila is an accessory for the Varsa V2 LED fixture. With an approximate diameter of 7`, it fits on a built-in slot in front of the light and allows you to use a color gel and barndoors simultaneously with it. Thanks to its beam angle of 10° &, this lens makes for a very narrow light projection that is ideal for illuminating small spots.

Nila Spot Holographic Film Lens for Varsa V2 Fixture

This Spot Holographic Film Lens from Nila is an accessory for the Varsa V2 LED fixture. With an approximate diameter of 7`, it fits on a built-in slot in front of the light and allows you to use a color gel and barndoors simultaneously with it. Thanks to its beam angle of 20° &, this lens makes for a narrow light projection that is ideal for illuminating small spots.

Nila Medium Holographic Film Lens for Varsa V2 Fixture

This Medium Holographic Film Lens from Nila is an accessory for the Varsa V2 LED fixture. With an approximate diameter of 7`, it fits on a built-in slot in front of the light and allows you to use a color gel and barndoors simultaneously with it. Thanks to its beam angle of 40° &, this lens is ideal for lighting subjects at mid-distance and for general use.

Nila Wide Holographic Film Lens for Varsa V2 Fixture

This Wide Holographic Film Lens from Nila is an accessory for the Varsa V2 LED fixture. With an approximate diameter of 7`, it fits on a built-in slot in front of the light and allows you to use a color gel and barndoors simultaneously with it. Thanks to its beam angle of 60° &, this lens makes for a wide light projection that is ideal for illuminating large spaces.

Nila Flood Holographic Film Lens for Varsa V2 Fixture

This Flood Holographic Film Lens from Nila is an accessory for the Varsa V2 LED fixture. With an approximate diameter of 7`, it fits on a built-in slot in front of the light and allows you to use a color gel and barndoors simultaneously with it. Thanks to its beam angle of 80° &, this lens makes for a very wide light projection that is ideal for illuminating large spaces.

Nila Elliptical Holographic Film Lens for Varsa V2 Fixture

This Elliptical Holographic Film Lens from Nila is an accessory for the Varsa V2 LED fixture. With an approximate diameter of 7`, it fits on a built-in slot in front of the light and allows you to use a color gel and barndoors simultaneously with it. The projection pattern of this lens is in the shape of an ellipse, offering a 60° & beam angle on one axis and a 10° & angle on the perpendicular axis. This essentially produces a slit of light, which makes for an interesting effect that can be used artistically.