The white Selador Desire D60 Studio HD LED Luminaire with Stage Pin Connector from ETC uses high-output, white light LEDs to create a suitable fixture for video, film, and other white light only applications where color temperature and skin-tone rendering are critical.
The luminaire offers a rugged, die-cast enclosure, quiet, fan-cooled operation, multiple lens options, and an advanced user interface that enables easy configuration and specific features for video and film professionals.
The fixture can be configured to operate under control of a studio lighting control desk or via stand-alone, no console required settings for location lighting. The D60 Studio HD uses the patented x7 Color System, mixing 5 colors with 2 different white LEDs to create brilliant HD white light with higher color-rendering qualities. It combines warm white and cool white LEDs for variable color temperature mixing. Added to this are 5 carefully chosen LED colors from the Selador x7 Color System to fill in the white LED spectral gaps.
The D60 Studio HD provides a rich variable white light possible in an LED fixture. The Luminaire comes with a hanging yoke, a 25° secondary lens, and 1.5m PowerCON to Stage Pin power cable.
The fixture uses Luxeon Rebel ES emitters specified by the strictest binning standards. However, on-camera LED response varies with different cameras and settings.
All LED sources experience some lessening of light output and color shift over time. LED output will vary with thermal conditions. Ambient temperatures and orientation affect thermal conditions. Based on the LED manufacturer`s B50 l70 specification, a Selador luminaire will achieve approx. 70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels, which may eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs.
60 LED variable white light wash fixture
IP20-rated for indoor use
Power and DMX In / Through connections for easy setup
User-friendly control interface with multiple modes and fixture settings
Rugged die-cast all-metal housing
Additional secondary lenses available for multiple beam spread options
Up to 9 fixtures (15 Amaximum) can be linked via a power thru connector
Requires power from a non-dim source
It produces variable white light with broad spectrum richness
Fixture comes with a 25° lens; additional lenses are sold separately
Multiple control options including RBG, strobe, and console-free Master / Slave mode
15-bit virtual dimming engine provides smooth, high quality theatrical fades
RDM functionality for address and setting changes
Active electronic thermal management for droop-free operation
Low-noise fan cooling; the fan is thermostatically controlled to run as needed
Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
Studio control mode allows fixtures to be operated with no DMX console required
ETC D60 Studio HD Specs
| Power Input | 100 to 240 VAC 50/60 Hz, universal power input |
| Power Consumption | 161 W, 1.35/0.68 A, 120/240 V at full intensity |
| LED Life | 50,000 hours LED life (to 70% intensity) |
| Emitter | LED: 60 Luxeon Rebel 2.5 W |
| Field Angle | Primary: 17° Native: 18° |
| Rating | At 3,200 K CRI: 89 CQS: 90 Color Fidelity: 91 Duv: 0.000 At 5,600 K CRI: 92 CQS: 94 Color Fidelity: 94 Duv: 0.000 |
| Mode | Boost - Cold: Degree: 16Ëš Candela: 222,200 Field Lumens: 4,920 Beam Lumens: 2,530 Lumens Per Watt: 33.4 Regulated: Degree: 16Ëš Candela: 208,500 Field Lumens: 4,610 Beam Lumens: 2,380 Lumens Per Watt: 33.7 |
| Broadcasting System | Acoustical: Fan Speed: 30%; Sound Pressure Level: 25.0 dBA Fan Speed: 51%; Sound Pressure Level: 37.4 dBA Fan Speed: 60%; Sound Pressure Level: 38.6 dBA Fan Speed: 100%; Sound Pressure Level: 43.1 dBA |
| Illuminance | 23,917 lux (2,222 fc) @ 10.0` (3.0 m) throw distance & 2.8` (0.9 m) field diameter 10,630 lux (988 fc) @ 15.0` (4.6 m) throw distance & 4.2` (1.3 m) field diameter 5,979 lux (556 fc) @ 20.0` (6.1 m) throw distance & 5.6` (1.7 m) field diameter 3,827 lux (356 fc) @ 25.0` (7.6 m) throw distance & 7.0` (2.1 m) field diameter |
| Operating Temperature | -4 to 104°F (-20 to 40°C) |
| Overall Dimensions | 9.80 x 11.42 x 12.17" (249.00 x 290.00 x 309.00 mm) |
| Weight | 19.18 lb (8.70 kg) |
Packaging Info
| Box Dimensions (LxWxH) | 21.5 x 15 x 12.5" |
In the Box
- ETC Selador Desire D60 Studio HD LED Luminaire with Stage Pin Connector (White)
- Hanging Yoke
- 25° Secondary Lens
- 1.5m PowerCON to two pin and ground (stage pin) connector power cable
- 3-Year Manufacturer Warranty
No posts found
