ETC Selador Desire D60 Studio Tungsten Luminaire with Edison Connector (White)

The fixture can be configured to operate under control of a studio lighting control desk or via standalone, no console required settings for location lighting. The D60 Studio Tungsten contains sixty energy-saving 3000 K LEDs for high-intensity, non-variable warm-white output. It provides an enhanced color rendering to the eye, particularly at high color temperature settings.

The Studio Tungsten features the all-white Luxeon Rebel ES LEDs and outputs large quantities of white light while using a mere 161W of power. The Studio Tungsten array produces warm, white light with a 3000 K color temperature.

All LED sources experience some lessening of light output and color shift over time. LED output varies with thermal conditions. Ambient temperatures and orientation affect thermal conditions. Based on the LED manufacturer`s B50 l70 specification, a Selador luminaire will achieve approx. 70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs are used for different durations and levels, which may eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs.

60 LED variable white light wash fixture

IP20-rated for indoor use

Power and DMX In / Through connections for easy setup (DMX512 in and through via 5-pin XLR connectors)

User-friendly control interface with multiple modes and fixture settings for console-free operation

Rugged die-cast all-metal housing

Easy access slots for secondary lenses and accessories

Up to 9 fixtures can be linked via power in/thru connectors per 15Acircuit using 1.0mm2 cables as supplied

Requires power from a non-dim source

Studio Tungsten`s red-shift option emulates tungsten dimming performance characteristics

Fixture comes with a 25° lens

Multiple control options including strobe and console-free Master / Slave mode

15-bit virtual dimming engine provides smooth, high quality theatrical fades

RDM functionality for address and setting changes

Active electronic thermal management for droop-free operation

Low-noise fan cooling; the fan is thermostatically controlled to run as needed with 60% speed at high intensities in room temperature

Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing

The fixture uses Luxeon Rebel ES emitters specified by strict binning standards

Studio control mode allows fixtures to be operated with no DMX console required