• Low stock

Impact 32' 5-in-1 Reflector with Lightstand and Holder Kit

Impact, Condition:New, MPN:CRK-32K
65.96
14 Days
Price in points: 66 points
Reward points: 1 point
IMCRK32K
In stock
+

Minimum quantity for "Impact 32' 5-in-1 Reflector with Lightstand and Holder Kit" is 1.

Item ships within 5 days, Shipping from european distribution center, Low-cost shipping all over Europe, New product, Local european warranty, 14 Day money back guarantee
Shipping time and rates:
Yes, we can ship to United States

The Impact Collapsible Reflector Disc is versatile in the field and in the studio, providing shadow-lightening detail in your subject, using available, or studio lighting. Your choice of color -- silver, gold, black, reflective or translucent white -- will be determined by the lighting conditions, and personal preference.

This 32" round disc is suitable for a half length portrait, and a small-size still-life setup. It features ergonomic handgrips that allow you to hold the disc in a flat or U-shaped position, or in any way that gets the job done. Each of the grips has additional 3/8" -16 threaded sockets for attachment to accessories or grip equipment. It folds down to 1/3 its open size, and comes with a storage sleeve.

Included is a pivoting arm that telescopes out of its own stand, to hold the disc where needed.

Impact 5-in-1 Collapsible Circular Reflector with Handles (32" )

This two-handle 32" 5-1 Circular Collapsible Reflector with Handles from Impact adds a polished-looking quality of light to your photos or videos. The reflector is built around a translucent disc which doesn t reflect as much as the solid white surface, but does exhibit soft neutral reflection. Its primary purpose, however, is as a diffuser that will tame contrast by being held over a subject s head in the harsh noon-day sun. The disc can also be used in situations where you d use a softbox. Using a disc holder or one of the 3/8" sockets, place your flash or constant light behind the suspended disc for soft, flattering light with open shadows.

The 5-in-1 reflector has handy convenience features that make it easy to use and deliver impressive results, while saving space by folding down to approximately one third of its open size. Impact s smart design provides ergonomic handgrips that allow you to hold the disc in a flat or U-shaped position, or in any way that gets the job done. Each of the grips has additional 3/8" -16 threaded sockets for attachment to accessories or grip equipment. The 5-in-1 Reflector comes with a carry/storage case.

The surfaces are available as removable, reversible sleeves that slip over the disc. Silver offers very high reflective qualities that render a snappy high-contrast look with a cool color bias. Just the opposite, the Gold surface reflects a very warm quality similar to late afternoon or sunset light. The Black fabric subtracts light from the subject, and can be used to block out unwanted light or to greatly reduce reflections on shiny or reflective surfaces. Finally, the flat White surface provides neutral reflectance with a soft quality of light.

EAN: 847628598904

Impact Multiboom Light Stand and Reflector Holder (13 )

The Impact Convertible Boom Arm/Light Stand can support a small or medium light head to a height of 13 . Raise the second section completely, click, and it is a boom stand. As a boom, it can hold a small light head to an extension of almost 3 from the center of the stand.

It is a reflector holder by means of its two clips, which can support an Impact, Flexfill, or Photoflex light disc as large as 60" .
A hole at the end of the arm allows an optional counterweight to be hung, for greater stability.

Using as a Boom Stand

  1. Loosen the large long handle in the middle of the stand.
  2. Loosen the top-most section of the stand. Pull that section all the way up.
  3. Pull! Swing it horizontally for the boom feature, and lock it for the desired setup.

EAN: 847628012042

Impact 5-in-1 Collapsible Circular Reflector with Handles (32") Specs

SurfacesBlack, Diffusion, Gold, Silver, White
ShapeCircle
Working Size32 x 32" / 81.3 x 81.3 cm
Collapsed Size1/3 of Working Size

Packaging Info

Package Weight1.395 lb
Box Dimensions (LxWxH)13.5 x 13.18 x 3"

Impact Multiboom Light Stand and Reflector Holder (13`) Specs

Stand Type1 x Convertible Boom Stand with Reflector Holder
Maximum Working Height13` / 4 m, with Boom Arm in Vertical Position
9` / 2.7 m, with Boom Arm at 90° Angle
10.5` / 3.2 m, with Boom Arm at 135° Angle
Minimum Working Height40" / 102 cm
Load Capacity5 lb / 2.3 kg, with Boom Arm in Vertical Position
3 lb / 1.4 kg, with Boom Arm
Closed Length40" / 102 cm

Mounting

Arm Mount (to Light/Accessory)5/8" Stud with 1/4"-20 Male Screw

Features

Accepts Second RiserNo
WheelsOptional
Air CushionedNo

General

Footprint Diameter36" / 91 cm
Leg ShapeRound: 20 mm
FinishBlack
Weight4.6 lb / 2.1 kg

Packaging Info

Package Weight5.5 lb
Box Dimensions (LxWxH)42 x 4.8 x 4.8"

In the Box

  • Storage/Carry Case
  • 2-Year Manufacturer Warranty
  • 2 x Integral Reflector Clip
  • Integral Locking Pivot Lever
  • 2-Year Manufacturer Warranty
  • 5 x Surfaces:
    Silver-Gold, silver mylar, white, gold and translucent
  • Tear resistant, nylon carrying pouch
    • Low stock
    7.71
    • Low stock
    10.92

    No posts found

    Write a review
    Impact 32' 5-in-1 Reflector with Lightstand and Holder Kit

    The answer to your request will be sent to your email address.