The Impact Collapsible Reflector Disc is a versatile lighting tool for in the field and in the studio. It allows you to bring out the shadow detail in your subject, using available or studio lighting. In addition, the colored surfaces allow you to modify the color of your subject. Your choice of color -- silver, gold, soft gold, reflective or translucent white -- will be determined by the lighting conditions, and personal preference.
This 42" round disc is suitable for a 3/4 length portrait, and a medium-size still-life setup. It folds down to 1/3 its open size, and comes with a storage sleeve.
Included is a pivoting arm that telescopes out of its own stand, to hold the disc where needed.
Impact 5-in-1 Collapsible Circular Reflector with Handles (42" )
This two-handle 42" 5-1 Circular Collapsible Reflector with Handles from Impact adds a polished-looking quality of light to your photos or videos. The reflector is built around a translucent disc which doesn t reflect as much as the solid white surface, but does exhibit soft neutral reflection. Its primary purpose, however, is as a diffuser that will tame contrast by being held over a subject s head in the harsh noon-day sun. The disc can also be used in situations where you d use a softbox. Using a disc holder or one of the 3/8" sockets, place your flash or constant light behind the suspended disc for soft, flattering light with open shadows.
The 5-in-1 reflector has handy convenience features that make it easy to use and deliver impressive results, while saving space by folding down to approximately one third of its open size. Impact s smart design provides ergonomic handgrips that allow you to hold the disc in a flat or U-shaped position, or in any way that gets the job done. Each of the grips has additional 3/8" -16 threaded sockets for attachment to accessories or grip equipment. The 5-in-1 Reflector comes with a carry/storage case.
The surfaces are available as removable, reversible sleeves that slip over the disc. Silver offers very high reflective qualities that render a snappy high-contrast look with a cool color bias. Just the opposite, the Gold surface reflects a very warm quality similar to late afternoon or sunset light. The Black fabric subtracts light from the subject, and can be used to block out unwanted light or to greatly reduce reflections on shiny or reflective surfaces. Finally, the flat White surface provides neutral reflectance with a soft quality of light.
EAN: 847628598966
Impact Multiboom Light Stand and Reflector Holder (13 )
The Impact Convertible Boom Arm/Light Stand can support a small or medium light head to a height of 13 . Raise the second section completely, click, and it is a boom stand. As a boom, it can hold a small light head to an extension of almost 3 from the center of the stand.
It is a reflector holder by means of its two clips, which can support an Impact, Flexfill, or Photoflex light disc as large as 60" .
A hole at the end of the arm allows an optional counterweight to be hung, for greater stability.
Using as a Boom Stand
- Loosen the large long handle in the middle of the stand.
- Loosen the top-most section of the stand. Pull that section all the way up.
- Pull! Swing it horizontally for the boom feature, and lock it for the desired setup.
EAN: 847628012042
Impact 5-in-1 Collapsible Circular Reflector with Handles (42") Specs
General
Surfaces | Black, Diffusion, Gold, Silver, White |
Shape | Circle |
Working Size | 42 x 42" / 106.7 x 106.7 cm |
Collapsed Size | 1/3 of Working Size |
Packaging Info
Package Weight | 2.07 lb |
Box Dimensions (LxWxH) | 15.65 x 15.55 x 2.6" |
Impact Multiboom Light Stand and Reflector Holder (13`) Specs
Stand Type | 1 x Convertible Boom Stand with Reflector Holder |
Maximum Working Height | 13` / 4 m, with Boom Arm in Vertical Position 9` / 2.7 m, with Boom Arm at 90° Angle 10.5` / 3.2 m, with Boom Arm at 135° Angle |
Minimum Working Height | 40" / 102 cm |
Load Capacity | 5 lb / 2.3 kg, with Boom Arm in Vertical Position 3 lb / 1.4 kg, with Boom Arm |
Closed Length | 40" / 102 cm |
Mounting
Arm Mount (to Light/Accessory) | 5/8" Stud with 1/4"-20 Male Screw |
Features
Accepts Second Riser | No |
Wheels | Optional |
Air Cushioned | No |
General
Footprint Diameter | 36" / 91 cm |
Leg Shape | Round: 20 mm |
Finish | Black |
Weight | 4.6 lb / 2.1 kg |
Packaging Info
Package Weight | 5.5 lb |
Box Dimensions (LxWxH) | 42 x 4.8 x 4.8" |
In the Box
- Storage/Carry Case
- 2-Year Manufacturer Warranty
- 2 x Integral Reflector Clip
- Integral Locking Pivot Lever
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase