Neewer TL253A + CR221A Camera Desk Mount Stand (Black)

Neewer TL253A Overview

The Neewer TL253A + CR221A Camera Desk Mount Stand is comprised of the Neewer Tabletop Stand with Auxiliary Holding Arm and the Neewer Extension Arm that can be joined together to form a single articulating arm. The stand has a load capacity of 8.8 lb, and each arm can support 2.2 lb.

Neewer TL253A Tabletop Stand with Auxiliary Holding Arm

Ideal for desktop setups, the TL253A Tabletop Stand with Auxiliary Holding Arm from Neewer clamps onto any table or desk up to 3.5" in thickness. The stand s ball head will vertically secure devices up to 8.8 lb to a 1/4" -20 top screw, allowing 360° rotation. You can easily mount your camera, light, and other devices and adjust their height from 24 to 47" in three sections.

The included auxiliary holding arm allows you to simultaneously support an extra device or accessory with its 1/4" -20 top screw ball head. It handles gear weighing up to 2.2 in the horizontal position. The arm can be attached to the included stand or a pole with a diameter from 0.8 to 1.1" .

Note:

When the arm is attached, loosen the arm s tightening knob to adjust the height of the stand. The arm can not be clamped to the top section of the stand.

Benefits

• The stand has a load capacity of up to 8.8 lb in the vertical position
• The arm has a load capacity of up to 2.2 lb in the horizontal position
• The stand s C-clamp has a nonslip silicone pad on its interior for a solid grip
• The stand features twist locks enabling quick and secure height adjustments
• Offers support and flexible positioning for your shootings
• Aluminum alloy construction ensures durability

EAN: 191073073388

Neewer CR221A Extension Arm with Ball Head (14" )

Add devices or accessories to your desktop setups with this CR221A Extension Arm with Ball Head from Neewer. This 14" long auxiliary arm clamps to a pole with a diameter from 0.9 to 1.1" . You easily can mount a camera, light, microphone, or additional gear using the 1/4" -20 top screw of the arm s ball head. Offering support and flexible positioning, the ball head has a 2.2 lb load capacity with 360° rotation and 90° tilting. The extension arm is constructed from aluminum, and its clamp has nonslip rubber padding for protection and a solid grip.