Eliminate long DMX wiring cable runs for up to seven groups of light fixtures with the SWIT Electronics Pocket Wireless DMX Controller when the fixtures are connected by an optional wireless receiver. This portable DMX controller controls your fixtures wirelessly via 2.4 GHz or wired (requires optional USB to XLR cable). When using the wireless control with the optional receivers, it has a range of over 1300` line-of-sight, which saves you the headache of running all that cable.
The unit features eight sliders for controlling up to eight channels per light fixture. You can create up to seven groups of lights, for a total of 56-channels. The controller powers from two AA batteries, which will run it for approximately four hours, and you can also power the unit via a micro-USB port using the included cable and USB power supply. To save power the unit enters sleep mode after one minute of inactivity.
2.4 GHz Wireless Quick Connect
Hard Wired DMX
You can also use the controller in a wired DMX installation with an optional USB Type-A to 5-pin XLR adapter
8 Channel, 7 Groups DMX512 Control
Power
SWIT LA-WR8 Specs
| DMX 512 Protocol | Channels: 8 Channels per Fixture: 8 GROUP Number: 7 |
| Signal Output | Wireless: 2.4 GHz USB Type-A |
| Connectors | USB 1 x Type-A 1 x Micro-USB |
| Wireless Transmission | 1312.34` / 400 m |
| Power | Supply 2 x AA Batteries 5 VDC (Through Micro-USB Socket) Consumption 1 W Output 1 x USB Type-A |
| Dimensions | 7.24 x 3.31 x 1.22" / 184 x 84 x 31 mm |
| Weight | 9.67 oz / 274 g (Without Batteries) |
Packaging Info
| Package Weight | 1.555 lb |
| Box Dimensions (LxWxH) | 10.7 x 5.3 x 3.1" |
In the Box
- SWIT Pocket Wireless DMX Controller
- USB to Micro-USB Cable
- 2-Year Manufacturer Warranty
Not in the Box
- Essential Batteries (Not Included)
Customer reviews
Recommendation for purchase
