Bolt VX-760C Wireless TTL Flash for Canon Kit with Compact Battery Pack, Rapid Charger and AA Batteries

The Bolt VX-760C Wireless TTL Flash for Canon Kit with Compact Battery Pack, Rapid Charger and AA Batteries combines the professional VX-760C wireless TTL flash unit with a compact battery pack and a rapid charger with NiMH batteries for extended flash shooting and fast recycle rates.

The VX-760C Wireless TTL Flash for Canon is a dedicated flash for use with Canon cameras that support shoe mount flash. The VX-760C features a guide number of 164' at ISO 100 and an adjustable tilt head with six positions: -7 to 90°. The -7° downward tilt allows you to fully illuminate your subject when shooting close-up. You can also twist it to the left up to 90° and to the right up to 180°. It covers a 24-180mm range (in 35mm full frame format) and extends to 18-180mm with the diffuser panel in place. In auto mode the zoom range is stepless: it does not set at 24mm, 35mm, etc, but matches the exact focal length of the zoom lens for optimal lighting. The flash supports rear curtain synchronization for shooting at slower shutter speeds. The VX-760C is equipped with wireless (optical pulse) manual and full TTL master and slave functions. It can operate on 4 distinct channels and in up to 3 wireless groups.

The VX-760C has an autofocus assist for low-light photography and an automatic power-saving function that turns the flash off when it's inactive. It is powered by four AA batteries with a flash duration between 1/800 and 1/20,000 of a second and a convenient HV port also allows you to connect the flash to an external power source for extended usage and faster recycling.

The Bolt CBP-C1 Compact Battery Pack is a lightweight, reliable power source that provides up to 595 full power flashes and recycles in 1.24 seconds. It is powered by 4 or 8 AA alkaline, lithium or NiMH batteries. Also included with this kit are two 4-hour rapid chargers with 8 AA NiMH batteries that can be recharged up to 1000 times for long-term use with the CBP-C1 Compact Battery Pack and Bolt VX-760C flash.

Bolt VX-760C Wireless TTL Flash for Canon Cameras

The VX-760C Wireless TTL Flash for Canon from Bolt is a dedicated flash for use with Canon cameras that support shoe mount flash. The VX-760C features a guide number of 164' at ISO 100 and an adjustable tilt head with six positions: -7 to 90°. The -7° downward tilt allows you to fully illuminate your subject when shooting close-up. You can also twist it to the left up to 90° and to the right up to 180°. It covers a 24-180mm range (in 35mm full frame format) and extends to 18-180mm with the diffuser panel in place. In auto mode the zoom range is stepless, it does not set at 24mm, 35mm, etc, but matches the exact focal length of the zoom lens for optimal lighting. The flash supports rear curtain synchronization for shooting at slower shutter speeds. The VX-760C is equipped with wireless (optical pulse) manual and full TTL master and slave functions. It can operate on 4 distinct channels and in up to 3 wireless groups.

The VX-760C has an autofocus assist for low-light photography and an automatic power-saving function that turns the flash off when it's inactive. It is powered by four AA batteries (not included), with a flash duration between 1/800 and 1/20,000 of a second. A convenient HV port allows you to connect the flash to an external power source, such as the Bolt Cyclone, for extended usage and faster recycling. The included stand allows you to set the flash up on a flat surface or to attach it to a tripod head, light stand, or clamp that has a standard 1/4"-20 mount.

This on-camera flash is fully compatible with Canon E-TTL / E-TTL II.

The VX-760C features full manual and full TTL wireless remote master and slave functions via wireless optical pulse transmission. Up to four channels (1, 2, 3 and 4) can be utilized so that master transmits only to designated slaves on the same channel. As slaves and masters, the VX-760C can be assigned to any one of three groups (A, B or C) and the mode and power set separately for each group.

Multi (stroboscopic) mode allows the flash to fire multiple times during one single exposure. This is useful to capture fast moving subjects or can provide multiple images of the subject moving through the frame. The VX-760C is also capable of being a wireless stroboscopic master, sending a stroboscopic signal to slave units.

The guide number for this flash is 164' (50 m) at 50mm and ISO 100.

The adjustable six-position flash head can be tilted up -7-90°, left 0-90° and right 0-180°. It has an automatic and manual 24-180mm zoom head.

As Canon cameras do not offer Flash Exposure Bracketing, the VX-760C is equipped with this feature to allow you to shoot three sequential images at varied flash power. FEB automatically adjusts flash compensation between -3 and +3, once above and once below the set flash exposure. This provides variations when determining the exact flash power is difficult. Red-eye Reduction and FE Lock are also supported by the VX-760C if your Canon camera has those functions.

The 2.0" rear backlit LCD Display allows you to easily make adjustments in low light and clearly see what your flash is set to for accurate readings.

With eight different manual power levels you can easily change from full to 1/128 power and fine tune your levels in increments of 1/3.

With a built-in autofocus-assist beam you can shoot in low-light conditions, using the beam to aid your camera's AF modes.

A PC sync terminal and included 12" cable allows you to easily shoot with the VX-760C off of the camera for increased versatility.

An HV port on the side of the flash allows you to connect the VX-760C to an external power source for extended use and for faster recycling time. The connection for the HV port is a Canon CZ-type.

This flash supports rear-curtain sync

A built-in reflector allows you to enhance the light coming from your flash and the diffuser panel, which extends the flash range to wide-angle 18mm, also softens the light for more flattering shadows and images.

Lock mode prevents inadvertent operation of the flash unit and overheating protection mode offers warnings when the flash is operating continuously with a chance of overheating and will temporarily disable the flash if temperatures are too high.

The automatic power-saving function turns the flash off to conserve power, allowing you to shoot longer

EAN: 847628555976

Bolt CBP-C1 Compact Battery Pack for Select Canon & Bolt VX Series Flashes

The CBP-C1 Compact Battery Pack from Bolt will boost the number of flashes and the recycle time of your compatible Canon, Bolt VX-series, Godox TT685 series, Nissin, Yongnuo YN685 series flash. The CBP-C1 can operate on four or eight AA batteries--alkaline, lithium, or nickel-hydride (NiMH). Lights on the pack indicate Standby, Recycle, or Low Power mode. A thermal protection switch prevents overheating. The CBP-C1 can provide up to 595 flashes per charge, and recycle times as fast as 1.24 seconds. The pack, which weighs just 7 oz without the batteries, can also be attached to the bottom of your camera using the tripod socket.

Option to use four or eight AA batteries at a time

Built-in thermal protection switch to automatically prevent overheating.

Recycles as fast as 1.24 seconds (with four AA alkaline batteries in flash unit and eight NiMH batteries in Compact Battery Pack).

Up to 595 flashes per charge at full power (with four AA alkaline batteries in flash unit and eight NiMH batteries in Compact Battery Pack).

Compatible Flashes

• Canon: Speedlite 600EX-RT, 600EX II-RT, 580EX, 580EX II, 550EX, 540EZ, 430EZ, Macro Ring Lite MR-14EX, Macro Twin Lite MT-24EX
• Bolt: VX-710N, VX-710C, VX-760N, VX-760C
• Godox: TT685 (all camera versions)
• Nissin: Di700 for Canon, Di866 for Canon, Di