Yongnuo YN685 Wireless TTL Speedlite and Wireless Flash Controller Kit for Canon Cameras

Comprising the essential components needed for a versatile wireless flash system for Canon cameras, the Yongnuo YN685 Wireless TTL Speedlite and Wireless Flash Controller Kit bundles the E-TTL / E-TTL II-enabled flash with the YN-622C-TX E-TTL Wireless Flash Controller for wireless, off-camera triggering and control from up to 328' away.

The YN685 features its own built-in radio transceiver for full radio slave functionality with the included YN-622C-TX controller and is also compatible with Canon's E-TTL / E-TTL II flash system when mounted to cameras for simple flash exposure control. A powerful guide number of 197' at ISO 100 and 200mm is complemented by a versatile 20-200mm zoom range, and the head can tilt upwards 90° or rotate 180° both right and left for full positioning control. A rear LCD panel, dial, and selection of buttons offers easy settings control, including the ability to work with high-speed, 1st curtain, and 2nd curtain sync options or adjust the power manually from 1/128 to 1/1 settings. Four AA batteries are used as its power source or an optional battery pack via HV power port, and a fast recycle time of 3 seconds is possible at full power.

Yongnuo YN685 Wireless TTL Speedlite for Canon Cameras

With a built-in YN-622C radio receiver, the YN685 Wireless TTL Speedlite from Yongnuo offers complete radio slave functionality with both the YN-622C and RF-603/YN-560 radio systems for maximum compatibility with your existing gear. The flash is also compatible with Canon's E-TTL / E-TTL II flash system when mounted to the camera and has a powerful guide number of 197' at ISO 100 and 200mm. Benefiting this power is a wide zoom range which will cover 20-200mm in full frame, and a diffuser for wide angle lenses. It also features full bounce with tilt up to 90° and rotation of 180° to the left or right.

Operation is simplified with a clear LCD screen on the back, a dial, and a selection of buttons. The head also offers a pull-out bounce panel for reflecting some light forward when using the tilt functionality. Full sync options are available as well, with high-speed, 1st & 2nd curtain sync. It runs conveniently on 4 AA batteries, has a recycle time of three seconds at full power, and includes an HV power port for battery packs. Additionally, it has a PC sync port.

Compatible with YN-622C, YN-622C-TX, YN560 IV flash, YN560-TX, RF-605, RF-603 III, and RF-603 transmitter systems

High-speed sync to 1/8000 second

Flash exposure compensation and bracketing in 1/3 EV increments from -3 to +3 EV

Manual power output from 1/128 to 1/1

Heat protection

Sound prompts

Custom functions and auto save settings

Locking metal foot

Yongnuo YN-622C-TX E-TTL II Wireless Flash Controller for Canon

Control multiple flashes equipped with the YN-622C E-TTL II transceiver with the YN-622C-TX E-TTL II Wireless Flash Controller from Yongnuo. Compatible with Canon E-TTL II cameras, this controller slides directly into the hot shoe and utilizes a 2.4 GHz frequency with a range of 328' to trigger the remote flashes. The controller also has TTL, manual, and multi flash modes available for full creative control. Additionally, it can utilize 7 channels and 3 groups for setting up multiple flash units easily and efficiently.

The YN-622C-TX utilizes an LCD screen to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high speed sync mode will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. A built-in mini-USB port enables firmware updates to be installed, and the device runs on 2 AA batteries.