ARRI Orbiter Fresnel Set with 15-65° Lens

ARRI Orbiter LED Light without Lens, Yoke, and Cable (Blue/Silver)

The ARRI Orbiter LED Light is part of a tunable light system with a powerful color engine and versatile, changeable optics. ARRI s 190-LED Spectra system features a wide range of color features allowing you to create an enormous range of colors with its six-color light engine, The light runs on universal 100 to 260V but it will also run on 48V batteries when AC power is unavailable.

Interchangeable Lenses, Complete RGB Color Control, and Battery or AC Power

The ARRI Orbiter LED Light is part of a tunable light system with a powerful color engine and versatile, changeable optics. ARRI s 190-LED Spectra system features a wide range of color features allowing you to create an enormous range of colors with its six-color light engine, The light runs on universal 100 to 260V but it will also run on 48V batteries when AC power is unavailable.

Wide CCT Color Range

Powerful Color Performance

Orbiter Options

Optics Auto Adjust in LiOS2 (Light Operating System)

LiOS2 Sync and Cue Mode

Full Suite of Sensors

Durable Build

ARRI Manual Yoke with Spigot for Orbiter

The Manual Yoke with Spigot for Orbiter from ARRI replaces the light s pole-operated yoke or provides one for Orbiters purchased without a yoke. Panning and tilting are done manually on the fixture. The yoke has a spigot for mounting onto a stand or clamp.

ARRI Power Cord with Switch for L-Series Fresnels (23 )

This 23 long Power Cord with Switch for L-Series Fresnels from ARRI provides mains power to the L5, L7, and L10 series LED fresnel lights. It features a powerCon True 1 connector and a heavy-duty inline power switch.

ARRI Control Panel for Orbiter

The Control Panel for Orbiter from ARRI allows adjustments of the Orbiter s functions such as color balance, special effects, and light intensity. The controller has a 4 full-color display, quick-navigation buttons, and integrated sensors, and can be separated from the fixture and used remotely via an optional 16.4 or 49.2 cable.

ARRI Orbiter Fresnel Lens (15-65° )

The Orbiter Fresnel Lens from ARRI attaches to any Orbiter color version to create a precise light spot with a soft single shadow. It delivers a true Fresnel output with a large and fully motorized zoom range of 15-65° that can be precisely positioned while being locally or remotely controlled by DMX/RDM or IP based (Art-Net or sACN).

A status LED display conveniently shows the current zoom angle and an effortless and safe mounting is offered with the Orbiter s QLM system. Despite its large aperture, this projection lens has a compact 13.4 x 15 x 14.6 housing with a 9.5 lb lightweight construction. In addition, it accepts separately available ARRI accessories such as 4- and 8-leaf barndoors, filter frames, and physical gels.

True Fresnel Output and Possibilities

ARRI 4-Leaf Barndoors for ARRI T5 and ST2/3 Studio Fresnels

The ARRI 4-Leaf Barndoors fit both the T5 and ST2 Fresnel fixtures. The barndoors attach to the front of the fixture and restrict light from areas of a set. ARRI barndoors are heat resistant and rotatable. Other lights that these barndoors fit include are the L-series L10, M-series M18, ARRISUN 18 EVENT, True Blue D25, and Compact 2500 Theater.