Astera AX1 Overview
The Astera AX1 Pixel Tube RGB LED Tube Light emits up to 253 lux at 3.3 (5500K) with an integrated battery that is suitable for a variety of uses in cine, theatrical, and event productions. The AX1 features 16 individually addressable LED emitters in a 3.4 long tube that you can mount into a set, on a stand, hang from a grid, or even hold in your bare hand. The AX1 features a CRI/TLCI rating of 88, which provides for good color rendition. The fixture can be used to create a soft, direct light on your subject or be used as an accent light as well as a design element in the location or set.
The fixture features five different Dimming Curve modes, as Astera refers to it. The selection of these modes along with the Pulse Width Modulation dimming of the fixture enables flicker-free video shooting. The Pixel Tube features an integrated battery that charges in approximately 7 hours using the included charger and has a run time of 20 hours. It can be controlled remotely by IR, a downloadable app, and wireless DMX. The Pixel Tube has an IP rating of 65 for dust and water ingress when the rubber plug to cover the charging port is in place. The IP65 rating means the fixture is completely dust-tight, and it is impervious to low-pressure jets, which means you can use this fixture in dusty environments and wet conditions. This version includes the tube light only.
Control
- You can use an Astera ARC1 infrared remote control (not included) simply point it at individual lights to set the desired effect.
- The downloadable AsteraApp is an efficient way to quickly create a customized light show using your device. It can group several lights, address individual lights or groups of lights, and send complex effects with a user-defined color palette to all lights in range. Please note the AsteraBox (not included) is required to control the light fixture through the app. You can also use the Astera ARC2 remote control (not included).
- The light can also be controlled by CRMX wireless DMX, as the built-in receiver is compatible with all LumenRadio CRMX transmitters as well as W-DMX G2, G3, G4, and G4S transmitters, although G4 and G4S are only supported in 2.4 GHz mode.
- You can also use an Astera ART3 Wireless DMX Transmitter to send DMX in the UHF frequency band, although CRMX is the recommended method.
Wireless Modules
865 to 870 MHz
902 to 928 MHz
2.4 GHz
TruColor Calibration
It has a 100% color consistency through any batch. It can hit exact color temperatures and reproduce standard filter gels.
Seamless Runtime
Set the length of your event and be sure that your lights won t run out while still getting the maximum brightness.
Talkback +
Detect all available lights, set them up, check their status, and configure DMX addresses and DMX profiles.
Flicker Free Filming
Scrambled PWM (Pulse Width Modulation) technology is used to prevent flickering when filming the lights.
Scheduled Standby Mode
You can switch the Astera AX1 into standby mode to save power and schedule it to wake up when the event starts.
DJ Application
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects.
Dynamic Power Boost
The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.
Dimmer Curve
You can set the fixture s dimming response depending on the application you are using the light for:
- Fast: For pixel mapping and similar applications, it provides a totally unfiltered response.
- Standard: Good compromise between response and smoothness for most applications.
- Halogen: When slow and smooth dimming is required, it emulates the characteristics of a halogen light.
- Theater: For theater use, provides a very smooth response and increased dynamics, although some colors are darker in this mode.
- TV: For filming on broadcast and other shows. The dimming response is faster but still smooth dimming. Although this mode produces less blue light due to its fixed white point of 6500K, it also provides increased dynamics, with some colors being darker.
Astera AX1 Specs
Key Specs
Item Type | 1x LED Light Tube/Wand |
Included Storage Case | No |
Photometrics | 3200K: 24 fc / 254 Lux at 3.3` / 1 m* 4000K: 24 fc / 255 Lux at 3.3` / 1 m* 5500K: 24 fc / 253 Lux at 3.3` / 1 m* *Standardized Measurement Supplied by the Manufacturer |
Color Temperature | Not Specified by Manufacturer |
Color Modes | RGB, Daylight, Tungsten |
Color Accuracy Standard | CRI 88 TLCI 88 |
Dimming | Yes |
Front Accessory Mount | No |
Wireless Remote Control Type | Bluetooth Wi-Fi IR Wireless CRMX |
Power Source | Battery (Built-In) |
Battery | 1x Rechargeable (Built-In) Up to 20-Hour Runtime 7-Hour Charge Time |
Input Power | 100 to 240 VAC, 50 / 60 Hz 48 VDC at 0.5 A |
Power Consumption | 16 W |
Fixture Mounting | 2x M5 Female Thread 1x 1/4"-20 Female Thread (Via Mounting Clip) |
In the Box
- Astera AX1 Pixel Tube RGB LED Tube Light (3.4`, Tube Light Only)
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase