DMG Lumiere SL1 MIX AC Kit with Offset Mount and 25' Extension Cable

DMG Lumiere SL1 MIX LED Panel

Offering power options, expansive color control choices, and a long, narrow form factor, the SL1 MIX LED Panel from DNG LUMIERE is a lightweight fixture measuring 48 x 8 and just 1.25 thick, allowing it to light areas where traditional fixtures can t go. The fact that it barely generates any heat makes it an even more valuable tool in tight situations.

DMG used a proprietary blend of red, lime, green, blue, amber, and white LEDs backed by a Color Mode plus hue and saturation adjustment to create the colors needed for your requirements. There is also full +/- green control, as well as Rosco s commonly used gel presets. The wide color latitude provides access to color temperatures from 1700 to 10,000K with a CRI of 95 and a TLCI of 90. The light s intensity is also variable from 0 to 100%, and while you can make these adjustments locally on the fixture, you can also make them wirelessly via DMG s myMIX phone app with your iOS or Android devices. The available phone app allows you to wirelessly mix your color, select a color, load it into your light, name it, save it to your library, and share colors with others.

This panel does not come with a power source. Choose between an optional SL1 MIX controller for DMX and AC use, universal power supply, or a battery plate for external V-mount or Gold Mount batteries.

Improve Your Workflow with myMIX Smartphone Wireless Control App

• Mix color
• Capture a photo, select a color, and load it to the light
• Name color and save it to library
• Collaborate, share your colors

Firmware v2.1 Update, March 2022

• New and improved DMX profiles with better linear response
• New Global and Gel2 profiles for improved workflow
• Advanced Art-Net setting for LAN and Wi-Fi
• New Wi-Fi- 5.8 GHz option
• Updated Display functionality adds 180° Screen rotation, Brightness and Control OFF modes, Bluetooth connectivity icon, and CRMX signal strength icon

DMG Lumiere External Power Supply Unit for SL1 Switch LED Light

EAN: 818531020417

The External Power Supply Unit for SL1 Switch LED Light from DMG LUMIERE is a universal 100–240 VAC, 24 VDC power source for the SL1. It attaches with its steel mounting plate to the back of the fixture. The power supply has a standard AC plug and a Chogori output connector.

DMG Lumiere 360 Degree Single Ball Offset Mount

As an alternative to the standard Lolly Pop mount, the steel and aluminum 360 Degree Single Ball Offset Mount from DMG Lumiere offers a 5/8 female receiver that facilitates stand mounting of the MINI, MAXI, and SL1 Switches. The ball mount offers 360 degree adjustment while the offset gooseneck provides complete positioning freedom. The mount will handle lights weighing up to 44 lb - more than enough to support the MINI, MAXI, and SL1.

DMG Lumiere MIX Controller for MINI MIX or SL1 MIX LED Lights

The MIX Controller for MINI MIX or SL1 MIX LED Lights from DMG LUMIERE is essentially the brain for these two fixtures and uses several methods to precisely adjust light intensity and color. The unit has three color modes: White Mode, Color Mode, and Gel Mode. White is a simple CCT mode that allows you to vary color temperature from 1700 to 10,000K in 50K increments with full Magenta/Green control. Gel Mode allows you to select from 186 Rosco gel filters, as well as additional gels stored in the unit s memory. Limited Hue and Saturation adjustments are possible. Color Mode contains HSI control (Hue, Saturation, and Intensity) that adds the ability to select a white base between 3200 and 5600K, while in DMX Mode the CCT base is expanded to 1700 to 10,000K, and combined with Hue and Saturation allows the creation of any color in the spectrum. Dimming is available in all modes via 4 presets: 25, 50, 75, and 100%. There s also a folder that contains effects such as Emergency Vehicle, Paparazzi, and Firelight.

The versatile Controller has multiple control options, too. Of course, you can make adjustments locally on the unit, but you can also do it remotely from a console with onboard DMX or wirelessly via the LumenRadio TiMo FX transceiver. You can also control the unit via the ArtNet protocol over the internet or a LAN network with Wi-Fi or an RJ45 connector. Most manufacturers would stop there but DMG has developed the myMIX app for iOS and Android that can control up to 14 controllers simultaneously via Bluetooth. The MIX Controller will accept optional V-Mount or Gold Mount batteries or a DMG power supply.

The MIX Controller can be Operated Remotely via 3 Communication Protocols:

DMX 512 Wired and Wireless

DMX512 is a worldwide standard communication protocol for the film and entertainmentindustry. There are 2 ways to communicate DMX to the MIX controller: wired DMX (XLR 5-pin) or Wireless DMX (LumenRadio TiMo FX RDM).

Bluetooth with myMIX App

MIX can be controlled remotely via Bluetooth with the myMIX app, which can control up to 14 controllers simultaneously. It s available for iOS and Android.

ArtNet

ArtNet is a communication protocol for transmitting the DMX512-A lighting controlprotocol and Remote Device Management (RDM) protocol over the User DatagramProtocol (UDP) of the Internet Protocol suite. It enables lights to be controlled overstandard internet or LAN network (via Wi-Fi or RJ45 connector).