Dracast Location Plus 3-Light Kit (Bi-Color)

Stay mobile and versatile while still packing enough light with this bi-color Location Plus 3-Light Kit from Dracast. It bundles three compact yet powerful LED500 LED lights together with various accessories to help get the job done. The lights also come with three 90Wh batteries, a dual battery charger, barndoors, filter frames, and 5-filter sets. Additionally, three light stands are packed in along with a hard carrying case to store and transport it all.

Dracast LED500 Plus Series Bi-Color LED Light

Expanding on their line of panels, the LED500 Plus Series Bi-Color LED Light from Dracast adds a digital display for adjusting output as well as Cat5 DMX input and output for linking and comes with both Gold mount and V-mount battery plates. The light features 512 LEDs with a high CRI of > 95 for excellent color accuracy. Also, this model features a variable color temperature from 3200-5600K for quickly matching either daylight or tungsten sources without needing to mess around with gels.

The lights offer a spot beam angle of 45° as well as dimming from 0-100%. Benefiting operation, it can run off of either a DC source, such as a Gold mount or V-mount battery, or a universal 100-240 VAC adapter. The light is durable as well with an aluminum chassis, frame, and mounting yoke and it only consumes 30W of power. Additionally, it is lightweight at just 4 lb and measures 12 x 6 x 2" in size.

Photometrics

At 3200K
2700 lux / 251 fc at 3 (1 m)
750 lux / 70 fc at 6 (2 m)
350 lux / 33 fc at 9 (3 m)
200 lux / 19 fc at 12 (4 m)
At 4300K
4400 lux / 409 fc at 3 (1 m)
1250 lux / 116 fc at 6 (2 m)
600 lux / 56 fc at 9 (3 m)
350 lux / 33 fc at 12 (4 m)
At 5600K
1950 lux / 181 fc at 3 (1 m)
530 lux / 49 fc at 6 (2 m)
265 lux / 25 fc at 9 (3 m)
150 lux / 14 fc at 12 (4 m)

EAN: 743724583168

Dracast Barndoors for LED500

These Barndoors from Dracast are made for the LED500, and slide into a slot on the front of the LED light. They are used to control the spread of the light and prevent unwanted light spill and they feature a filter holder.

EAN: 639713546910

Dracast Filter Frame for LED500 Light

The Dracast Filter Frame for LED500 allows the use of Dracast or other brand diffusion, CTO, CTB or effects filters with the fixture. Constructed of lightweight aluminum, the frame drops into the fixture s accessory channel. It has a frame lock to prevent filter slippage.

EAN: 720189881152

Dracast Filter Set for LED500 Light (5-Piece)

The Dracast 5 Filter Set for LED500 Light contains rigid light modifiers that measure approximately 12 x 6" to match the fixture. Included in the kit are one each: 1/4, 1/2, and Full CTO filters to change the light s daylight balance to tungsten. A Half White Diffusion and an Opal Frost Diffusion Filter are also included to soften the light s output.

EAN: 753807556835

Dracast 90Wh 14.8V Li-Ion V-Mount Battery

The Dracast 90Wh 14.8V Li-Ion V-Mount Battery is a memory-effect-free battery for professional camera systems. It features built-in electronics to protect the battery during charging and use, charger is not included with the battery. The 5-LED battery system provides an indicator that shows you how much capacity the battery has left before it needs to be charged. It incorporates a D-tap power outlet, so you can power accessories directly, instead of through your camera s electronics. With an operating temperature range of -4 to 122° F, the battery will keep working even in deep cold and extreme heat.

90Wh Li-ion professional mount battery pack does not suffer from memory effect, common to NiCd batteries.

Fits camera and lighting units with V-Mount battery bracket.

The built-in LED battery gauge provides you with a clear visual confirmation of the battery s capacity.

The built-in D-tap connector allows you to power accessories directly from the battery, protecting your camera s electronics from potential damage due to power hungry accessories.

The battery incorporates electronic protection from over-charging, over-discharging, over-current-draw, external short-circuits, and non-equilibrium between its power cells.

The battery will operate in temperature extremes that are uncomfortable for most people. Please note that as a general rule, battery capacity decreases as the temperature gets colder. Check your owner s manual for instructions on charging cold or hot batteries.

An attached rubber cover protects the D-tap connector when not in use.

Dracast DR-CH2V Dual V-Mount Battery Charger

The portable DR-CH2V Dual V-Mount Battery Charger from Dracast allows you to simultaneously charge two V-Mount batteries (or a single battery) from 90 to 240 VAC sources. It features a top handle for easy transport and built-in capacity management system to ensure fast charging. The charger will automatically shutdown once the batteries reach their full charge. Additionally, the charger can function as a portable AC to DC power adapter, taking the AC power input and outputting 15 VDC at 4A via a 4-pin XLR connector. The output is only active when no batteries are attached.

EAN: 610708234128

Dracast DLS-805 Spring-Cushioned Light Stand (6 )

The DLS-805 Spring-Cushioned Light Stand from Dracast extends from 28.5" to 72" and has a load capacity of 13 lb. It folds down to 28.5" for transport, and weighs 3.4 lb. There is a 5/8" stud on top of the stand.

The stand is composed of lightweight aluminum and is anodized to cut down on reflections. It is spring-cushioned to keep lighting fixtures damage-free when lowering. Large knobs are easy to grip and allow for quick, smooth adjustments.

EAN: 639713546699

SKB iSeries 2918-10BE Waterproof Case (Black, Empty)

Store, transport, and protect two cameras, up to ten lenses, and related accessories in the watertight, dustproof, and molded SKB iSeries 2918-10BE Case. The black case features five trigger latches, two metal-reinforced locking loops for optional padlocks, an automatic ambient pressure-equalization valve, an over-sized top handle, side handles, and a trolley handle with wheels.

Industrial strength injection-molded pull handle

Wide set inline skate-style wheels for easy transport

TSA accepted key locking latches (sold separately)

Padlock holes include stainless steel padlock protector clips

Water and dustproof design

Molded-in hinge for added protection

Trigger-release latch system

Snap-down, rubber, overmolded, cushion grip handle

Polypropylene co-polymer used in injection molding

Ambient pressure equalization valve

Resistant to impact damage

EAN: 789270991934