Dracast Portrait Plus 3-Light Kit (Daylight)

Create a 3-point lighting setup for your subjects with this daylight Portrait Plus 3-Light Kit from Dracast. It packs together an LED1000 Plus LED light and an LED500 Plus LED light with a small LED200 on-camera LED light for more mobile setups. Besides the fixtures, the kit also includes two 90Wh V-mount Li-ion batteries and a dual battery charger, as well as four-way barndoors, filter frames, and filter sets for the LED1000 and LED500 panels. Additionally, two light stands and a hard carrying case are included.

Dracast LED1000 Plus Series Daylight LED Light

Expanding on their line of panels, the LED1000 Plus Series Daylight LED Light from Dracast adds a digital display for adjusting output as well as Cat5 DMX input and output for linking and comes with both Gold mount and V-mount battery plates. The light features 1024 LEDs with a high CRI of > 95 for excellent color accuracy. Also, this model has a daylight-balanced color temperature of 5600K for matching with natural light and other fixtures.

The lights offer a spot beam angle of 45° as well as dimming from 0-100%. Benefiting operation, it can run off of either a DC source, such as a Gold mount or V-mount battery, or a universal 100-240 VAC adapter. The light is durable as well with an aluminum chassis, frame, and mounting yoke and it only consumes 60W of power. Additionally, it is lightweight at just 5.5 lb and measures 12 x 12 x 2" in size.

Photometrics

8000 lux / 743 fc at 3 (1m)
2100 lux / 195 fc at 6 (2m)
1025 lux / 95 fc at 9 (3m)
600 lux / 56 fc at 12 (4m)

EAN: 743724583182

Dracast LED500 Plus Series Daylight LED Light

Expanding on their line of panels, the LED500 Plus Series Daylight LED Light from Dracast adds a digital display for adjusting output as well as Cat5 DMX input and output for linking and comes with both Gold mount and V-mount battery plates. The light features 512 LEDs with a high CRI of > 95 for excellent color accuracy. Also, this model has a daylight-balanced color temperature of 5600K for matching with natural light and other fixtures.

The lights offer a spot beam angle of 45° as well as dimming from 0-100%. Benefiting operation, it can run off of either a DC source, such as a Gold mount or V-mount battery, or a universal 100-240 VAC adapter. The light is durable as well with an aluminum chassis, frame, and mounting yoke and it only consumes 30W of power. Additionally, it is lightweight at just 4 lb and measures 12 x 6 x 2" in size.

Photometrics

5500 lux / 511 fc at 3 (1 m)
1550 lux / 144 fc at 6 (2 m)
725 lux / 67 fc at 9 (3 m)
430 lux / 40 fc at 12 (4 m)

EAN: 743724583151

Dracast LED200 Daylight On-Camera LED Light

The LED200 Daylight On-Camera LED Light from Dracast is a 5600K on-camera LED designed for DV and DSLR photographers in need of a lightweight, portable, and continuous lighting source. The LED fixture mounts onto a shoe mount. It has a life expectancy of 50,000 hours, a CRI of over 95, a run-time of two to four hours, and an effective distance of 20 . The light comes with a nylon soft carry case.

Lightweight at 0.5 lb

Aluminum construction

Display screen

Single color

Sony and Panasonic battery options

Hot shoe mount and nylon soft carry case included

Dracast 90Wh 14.8V Li-Ion V-Mount Battery

The Dracast 90Wh 14.8V Li-Ion V-Mount Battery is a memory-effect-free battery for professional camera systems. It features built-in electronics to protect the battery during charging and use, charger is not included with the battery. The 5-LED battery system provides an indicator that shows you how much capacity the battery has left before it needs to be charged. It incorporates a D-tap power outlet, so you can power accessories directly, instead of through your camera s electronics. With an operating temperature range of -4 to 122° F, the battery will keep working even in deep cold and extreme heat.

90Wh Li-ion professional mount battery pack does not suffer from memory effect, common to NiCd batteries.

Fits camera and lighting units with V-Mount battery bracket.

The built-in LED battery gauge provides you with a clear visual confirmation of the battery s capacity.

The built-in D-tap connector allows you to power accessories directly from the battery, protecting your camera s electronics from potential damage due to power hungry accessories.

The battery incorporates electronic protection from over-charging, over-discharging, over-current-draw, external short-circuits, and non-equilibrium between its power cells.

The battery will operate in temperature extremes that are uncomfortable for most people. Please note that as a general rule, battery capacity decreases as the temperature gets colder. Check your owner s manual for instructions on charging cold or hot batteries.

An attached rubber cover protects the D-tap connector when not in use.

Dracast DR-CH2V Dual V-Mount Battery Charger

The portable DR-CH2V Dual V-Mount Battery Charger from Dracast allows you to simultaneously charge two V-Mount batteries (or a single battery) from 90 to 240 VAC sources. It features a top handle for easy transport and built-in capacity management system to ensure fast charging. The charger will automatically shutdown once the batteries reach their full charge. Additionally, the charger can function as a portable AC to DC power adapter, taking the AC power input and outputting 15 VDC at 4A via a 4-pin XLR connector. The output is only active when no batteries are attached.

EAN: 610708234128

Dracast Barndoors for LED1000

These Barndoors from Dracast are made for the LED1000, and slide into a slot on the front of the LED light. They are used to control the spread of the light and prevent unwanted light spill and they feature a filter holder.

EAN: 639713546811

Dracast Barndoors for LED500

These Barndoors from Dracast are made for the LED500, and slide into a slot on the front of the LED light. They are used to control the spread of the light and prevent unwanted light spill and they feature a filter holder.

EAN: 639713546910

Dracast Filter Frame for LED1000 Light

The Dracast Filter Frame for LED1000 allows the use of Dracast or other brand diffusion, CTO, CTB or effects filters with the fixture. Constructed of lightweight aluminum, the frame drops into the fixture s accessory channel. It has a frame lock to prevent filter slippage.

EAN: 720189882555

Dracast Filter Frame for LED500 Light

The Dracast Filter Frame for LED500 allows the use of Dracast or other brand diffusion, CTO, CTB or effects filters with the fixture. Constructed of lightweight aluminum, the frame drops into the fixture s accessory channel. It has a frame lock to prevent filter slippage.

EAN: 720189881152

Dracast Filter Set for LED1000 Panel (2-Piece)

The Dracast 2 Filter Set for LED1000 Panel contains 2 rigid light modifiers that measure approximately 12 x 12" to match the LED1000 LE