Dracast Studio Plus 3-Light Kit (Bi-Color)

Get a ton of power and versatility with the bi-color Studio Plus 3-Light Kit from Dracast. It features three LED1000 Plus LED lights which offer outstanding output and make a great three-point lighting setup. Besides the fixtures, the kit also includes three 90Wh V-mount Li-ion batteries and a dual battery charger as well as four-way barndoors, filter frames, and two filter sets for the LED1000 panels. Additionally, three light stands and a hard carrying case with wheels are included.

Dracast LED1000 Plus Series Bi-Color LED Light

Expanding on their line of panels, the LED1000 Plus Series Bi-Color LED Light from Dracast adds a digital display for adjusting output as well as Cat5 DMX input and output for linking and comes with both Gold mount and V-mount battery plates. The light features 1024 LEDs with a high CRI of > 95 for excellent color accuracy. Also, this model features a variable color temperature from 3200-5600K for quickly matching either daylight or tungsten sources without needing to mess around with gels.

The lights offer a spot beam angle of 45° as well as dimming from 0-100%. Benefiting operation, it can run off of either a DC source, such as a Gold mount or V-mount battery, or a universal 100-240 VAC adapter. The light is durable as well with an aluminum chassis, frame, and mounting yoke and it only consumes 60W of power. Additionally, it is lightweight at just 5.5 lb and measures 12 x 12 x 2" in size.

Photometrics

At 3200K
3800 lux / 353 fc at 3 (1m)
1150 lux / 107 fc at 6 (2m)
530 lux / 49 fc at 9 (3m)
300 lux / 28 fc at 12 (4m)
At 4300K
7200 lux / 669 fc at 3 (1m)
2050 lux / 190 fc at 6 (2m)
950 lux / 88 fc at 9 (3m)
560 lux / 52 fc at 12 (4m)
At 5600K
4200 lux / 390 fc at 3 (1m)
1200 lux / 111 fc at 6 (2m)
530 lux / 49 fc at 9 (3m)
300 lux / 28 fc at 12 (4m)

EAN: 743724583199

Dracast 90Wh 14.8V Li-Ion V-Mount Battery

The Dracast 90Wh 14.8V Li-Ion V-Mount Battery is a memory-effect-free battery for professional camera systems. It features built-in electronics to protect the battery during charging and use, charger is not included with the battery. The 5-LED battery system provides an indicator that shows you how much capacity the battery has left before it needs to be charged. It incorporates a D-tap power outlet, so you can power accessories directly, instead of through your camera s electronics. With an operating temperature range of -4 to 122° F, the battery will keep working even in deep cold and extreme heat.

90Wh Li-ion professional mount battery pack does not suffer from memory effect, common to NiCd batteries.

Fits camera and lighting units with V-Mount battery bracket.

The built-in LED battery gauge provides you with a clear visual confirmation of the battery s capacity.

The built-in D-tap connector allows you to power accessories directly from the battery, protecting your camera s electronics from potential damage due to power hungry accessories.

The battery incorporates electronic protection from over-charging, over-discharging, over-current-draw, external short-circuits, and non-equilibrium between its power cells.

The battery will operate in temperature extremes that are uncomfortable for most people. Please note that as a general rule, battery capacity decreases as the temperature gets colder. Check your owner s manual for instructions on charging cold or hot batteries.

An attached rubber cover protects the D-tap connector when not in use.

Dracast DR-CH2V Dual V-Mount Battery Charger

The portable DR-CH2V Dual V-Mount Battery Charger from Dracast allows you to simultaneously charge two V-Mount batteries (or a single battery) from 90 to 240 VAC sources. It features a top handle for easy transport and built-in capacity management system to ensure fast charging. The charger will automatically shutdown once the batteries reach their full charge. Additionally, the charger can function as a portable AC to DC power adapter, taking the AC power input and outputting 15 VDC at 4A via a 4-pin XLR connector. The output is only active when no batteries are attached.

EAN: 610708234128

Dracast Barndoors for LED1000

These Barndoors from Dracast are made for the LED1000, and slide into a slot on the front of the LED light. They are used to control the spread of the light and prevent unwanted light spill and they feature a filter holder.

EAN: 639713546811

Dracast Filter Frame for LED1000 Light

The Dracast Filter Frame for LED1000 allows the use of Dracast or other brand diffusion, CTO, CTB or effects filters with the fixture. Constructed of lightweight aluminum, the frame drops into the fixture s accessory channel. It has a frame lock to prevent filter slippage.

EAN: 720189882555

Dracast Filter Set for LED1000 Light (5-Piece)

The Dracast 5 Filter Set for LED1000 Light contains rigid light modifiers that measure approximately 12 x 12" to match the fixture. Included in the kit are one each: 1/4, 1/2, and Full CTO filters to change the light s daylight balance to tungsten. A Half White Diffusion and an Opal Frost Diffusion Filter are also included to soften the light s output.

EAN: 753807556781

Dracast DLS-805 Spring-Cushioned Light Stand (6 )

The DLS-805 Spring-Cushioned Light Stand from Dracast extends from 28.5" to 72" and has a load capacity of 13 lb. It folds down to 28.5" for transport, and weighs 3.4 lb. There is a 5/8" stud on top of the stand.

The stand is composed of lightweight aluminum and is anodized to cut down on reflections. It is spring-cushioned to keep lighting fixtures damage-free when lowering. Large knobs are easy to grip and allow for quick, smooth adjustments.

EAN: 639713546699

Dracast Hard Side Travel Case with Wheels (Black, Medium)

Store, transport, and protect a LED light panel, modifiers, and related accessories in the medium black Hard Side Travel Case with Wheels from Dracast. This case features a removable pre-cut foam interior, a latch closure, and spring-loaded side handles. For strength and durability, the case has reinforced corners and edges. Roll the case from place to place on the castor wheels.