Frezzi SunLight Overview
The SunLight AC Travel Kit from Frezzi is a comprehensive, carefully considered assortment of products designed to maximize the potential of the SunLight fixture. The kit includes 1 dimmable, daylight-balanced SunLight head with output that approximates that of a 575W HMI, along with 4-way barndoors, CTO and Diffusion Filter Pack, 7' light stand, and Stand Clamp Dual Brick adapter. This is a AC only kit but the SunLight also runs on separately purchased batteries. It all fits in a 10.5 x 17 x 22" wheeled, waterproof hard case.
Frezzi SunLight LED Head
The SunLight LED Light from Frezzi is an innovative light source that uses proprietary Directional Focusing Technology to access 100% of the generated light without lenses or filters that would sap the output. The SunLight produces the equivalent of 575W of HMI light with a color temperature of 5500K, while drawing only 220W and maintaining a high CRI of 93. The beam is adjustable from 20-degree spot to a wide flood that can be further controlled with optional 4-way barndoors. Light intensity is variable too, from 0 to 100% without color shift. The 8 x 10.5 x 13" fixture weighs just 6.5 lb, a fraction of the weight of many lights with comparable output. The SunLight LED Light is ready for worldwide use thanks to the inclusion of a 120 - 240 VAC adapter but it can also run on batteries when AC power is unavailable. For example, the SunLight gets 45 minutes of run time from two Frezzi HD-150 batteries. And don't worry about inclement weather - the SunLight is rated IP55 weather-resistant.
Benefits
- 575W HMI-type output - almost 1000 fc at 10'
- Direct Focusing LED without the use of filters
- 45 Minute run time with two Frezzi HD-150 batteries
- Weatherproof and rugged all aluminum chassis
- Lightweight and compact - only 6.5-pound fixture
- Instant on and runs cool - fast setup and break-down
- Compact, optional, fully loaded AC/DC travel kit with HD stand available
- Travel friendly optional NiMH battery is safe for air transport
- No harmful UV radiation
- Saves money - no bulb replacements or ballast repairs
- Full 0 to 100% dimming without color shift
- Integrated LED voltmeter for battery/power supply status
Photometrics
Full Flood: 600 fc @ 10' (3.0 m)
Full Spot: 950 fc @ 10' (3.0 m)
Frezzi 220W AC Power Supply for SunLight LED Head
Keep your SunLight LED Head powered up during a long shoot with this 220W AC Power Supply from Frezzi. It works with a universal 120-240 VAC system, permitting it to be used worldwide. Also, it outputs about 24 VDC, an ideal setup for the SunLight fixture.
Frezzi Barndoor Set for SunLight LED Light
Ideal for modifying the light output, the four-leaf Barndoor Set for SunLight LED Light from Frezzi controls spill light while it allows you to shape the fixture's light beam by swinging the leaves into it. A valuable asset for selective lighting, the barndoor set enables you to light the areas of a subject that you want to, while keeping light from areas that you don't want illuminated.
Frezzi CTO Gel and Diffusion Filter for SunLight
The CTO Gel and Diffusion Filter for SunLight from Frezzi contains a Full CTO for converting the SunLight fixture's 5600K color temperature to 3200K. A diffusion filter is also included to soften the light's output.
Frezzi FHMS Heavy-Duty Mini Light Stand (7')
Usually a component of Frezzi SkyLight and SunLight kits, the aluminum 7' FHMS Heavy-Duty Mini Light Stand has a 5/8" top stud and a reverse-folding leg design that makes it possible to easily fit in the kit cases.
Frezzi Power Cable for SunLight
The Power Cable for SunLight from Frezzi is a 12' long cable with a 2-prong plug that provides mains power to the SunLight LED fixture.
Frezzi Stand Clamp Dual Brick Battery Adapter
Featured in Frezzi SunLight kits, the Stand Clamp Dual Brick Battery Adapter clamps to the light stand supporting the fixture and holds 2 brick-type batteries to power it. Used on the lower section of the stand, the batteries, which weigh approximately five pounds each, act as ballast to stabilize the light. The adapter can also be used to hold the AC power supply.
Frezzi Transport Case for SkyLight Dual Kit
This Transport Case for SkyLight Dual Kit from Frezzolini is a rugged waterproof wheeled case with a pull handle and a padded divider set.
Frezzi SunLight LED Head Specs
Key Specs
| Item Type | 1x LED Focusing Flood Light |
| Included Storage Case | No |
| Photometrics | 20° at 5500K: 8546 fc / 91,998 Lux at 3.3' / 1 m* 950 fc / 10,222 Lux at 10' / 3 m *Standardized Measurement Calculated Internally Based on Closest Distance |
| Color Temperature | 5500K |
| Color Modes | Daylight |
| Color Accuracy Standard | CRI 93 |
| Dimming | Built-In Dimmer 0 to 100% |
| Front Accessory Mount | Proprietary |
| Power Source | AC to DC Adapter (Not Included) Battery (Not Included) |
| Battery Plate Type | 1x Gold Mount (Not Included) 1x V-Mount (Not Included) |
| Battery | 1x D-Tap Rechargeable (Not Included) |
| Input Power | 120 to 240 VAC, 50 / 60 Hz 24 to 36 VDC |
| Power Consumption | 220 W |
| Fixture Mounting | 1x 5/8" Receiver (Via Yoke Mount) |
Light Fixture
| Item Type | 1x LED Focusing Flood Light |
| Included Storage Case | No |
| Photometrics | 20° at 5500K: 8546 fc / 91,998 Lux at 3.3' / 1 m* 950 fc / 10,222 Lux at 10' / 3 m *Standardized Measurement Calculated Internally Based on Closest Distance |
| Color Temperature | 5500K |
| Color Modes | Daylight |
| Color Accuracy Standard | CRI 93 |
| Dimming | Built-In Dimmer 0 to 100% |
| Expected Lamp Life | 50,000 Hours |
| Beam Angle | 20° |
| Built-In Flash | No |
| Preprogrammed Effects | No |
| Umbrella Mount | No |
| Front Accessory Mount | Proprietary |
Connectivity
| Mobile App Compatible | No |
Power & I/O
| Power Source | AC to DC Adapter (Not Included) Battery (Not Included) |
| Inputs/Outputs | 1x Amphenol 2-Pin Power Input |
| Battery Plate Type | 1x Gold Mount (Not Included) 1x V-Mount (Not Included) |
| Battery | 1x D-Tap Rechargeable (Not Included) |
| Input Power | 120 to 240 VAC, 50 / 60 Hz 24 to 36 VDC |
| Inline Switch | No |
| Power Pass-Thru | No |
| Power Consumption | 220 W |
Mounting
| Yoke Type | Manually-Operated Yoke |
| Fixture Mounting | 1x 5/8" Receiver (Via Yoke Mount) |
Environmental
| Environmental Protection | Weather-Resistant (Unrated) |
General
| Display | No |
| Materials | Aluminum (Housing) |
| Dimensions | 11.8 x 10 x 8" / 29.97 x 25.4 x 20.32 cm (Fixture) |
| Weight | 6.5 lb / 2.9 kg |
Frezzi 220W AC Power Supply for SunLight LED Head Specs
Electrical
| Input Power | 120 to 240 VAC, 50 / 60 Hz |
| Output Voltage | 24 VDC |
| Power Draw | 220.00 W |
Frezzi Barndoor Set for SunLight LED Light Specs
General
| Item Type | 4-Leaf Barndoors |
| Light Compatibility | Proprietary Mount: For Frezzi SunLight |
Frezzi CTO Gel and Diffusion Filter for SunLight Specs
Frezzi FHMS Heavy-Duty Mini Light Stand (7') Specs
Key Specs
| Stand Type | 1 x General Purpose Stand |
| Maximum Working Height | 7' / 2.1 m |
| Stand/Column Top Mount | 5/8" Stud |
| Air Cushioned | No |
| Leveling Leg | No |
| Maximum Working Height | 7' / 2.1 m |
Mounting
| Stand/Column Top Mount | 5/8" Stud |
Features
| Accepts Second Riser | No |
| Air Cushioned | No |
| Detachable Base | No |
| Leveling Leg | No |
| Reverse Legs | Yes |
General
| Leg Shape | Rectangular |
| Finish | Black |
Packaging Info
| Package Weight | 2.5 lb |
| Box Dimensions (LxWxH) | 23 x 3 x 3" |
Frezzi Power Cable for SunLight Specs
General
| Dimensions | 9.0' (2.7 m) |
| Plug | 2-Prong US/No. American |
Packaging Info
| Package Weight | 1.06 lb |
| Box Dimensions (LxWxH) | 9.8 x 8 x 4.1" |
Frezzi Stand Clamp Dual Brick Battery Adapter Specs
Frezzi Transport Case for SkyLight Dual Kit Specs
Key Specs
| Color | Black |
| Carry/Transport Options | Handle, Retractable Handle, Wheels (Built-In) |
| Water Resistance | Waterproof |
| Dimensions | Exterior 22 x 17 x 10.5" / 55.9 x 43.2 x 26.7 cm |
| Weight | 19 lb / 8.6 kg |
| Carry/Transport Options | Handle, Retractable Handle, Wheels (Built-In) |
| Security Lock | Accepts Padlock (Not Included) |
General
| Water Resistance | Waterproof |
| Dimensions | Exterior 22 x 17 x 10.5" / 55.9 x 43.2 x 26.7 cm |
| Weight | 19 lb / 8.6 kg |
In the Box
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- Padded Divider Set
- 2-Year Manufacturer Warranty
No posts found
