GVM 896S Bi-Color LED Panel

The 896S has a tight 25-degree medium beam spread that can be further controlled with the light s 4-way barndoors. Simply swing one or more of the barndoor s leaves into the path of the beam to light areas that you want to and keep light from areas that you don t want illuminated. The light is dimmable too, from 10 to 100%. The 896S also features a Master/Slave Control Mode. Set one GVM LED light as the master light and other optional GVM lights as slaves. The panel has a total of 12 channels that can each support up to 10 lights. Brightness and color temperature adjustments on the master light will be mimicked on the slave lights.

The 896S runs on 110-220 VAC voltage using the included AC adapter, but it will also run on optional NP-F-type batteries when mains power is unavailable. The light comes with a diffusion filter and a bracket diffusion filter to soften the bright LEDs, as well as a case for storage and transport.

Master and Slave Control Mode

Set one GVM LED light as the master light. Set other optional GVM video lights as the slave lights. The panel has a total of 12 channels. Each channel supports up to 10 lights.You can adjust brightness and color temperature of all slave lights via adjustments on the master.

Aluminum Alloy Construction, Effective Heat Dissipation

Constructed from durable aluminum alloy, the panel dissipates heat effectively, providing the LEDs with a long service time of up to 70,000 hours.

Easy-to-Read LCD Display

You can easily adjust color temperature and brightness via two knobs. Adjustments are indicated on the easy-to-read LCD display.

25-Degree Beam Angle, Barndoors

The tight 25-degree beam angle allows directional control for selective lighting of the subject. The included barndoors provide further control.

Wide Color Temperature Range and Dimming Control

Color temperature can be adjusted from 2300 to 6800K to deal with any ambient light condition, match other light sources, or for creative expression.

Two Different Diffusers

Two diffusers are provided to soften the output of the bright LEDs. One is inserted directly into the panel, while the other is installed with four support screws for increased softness.