The Lyra Bi-Color 5-Point LED Soft Panel Light Kit with 2 x LB10 and 3 x LB5 from ikan is a complete lighting setup for the photographer in the studio or on the road. The kit includes 2 Lyra Bi-Color LB10s and 3 Lyra Bi-Color LB5s each with a yoke mount, a wireless remote control, a Gold mount battery plate, and a V-mount battery plate. For storage and transport 2 cases are included for the stands and 2 cases are included for the lights.
ikan Lyra LB10 Bi-Color LED Light Panel
The Lyra LB10 Bi-Color Soft LED Panel from ikan is built into a heavy-duty molded plastic chassis providing a lightweight yet strong variable color fixture with enhanced features such as 100-10% flicker-free dimming and an LCD display. It features an integrated 1/2 stop diffuser for extra softness, while its 900 LEDs produce a 110° beam spread with a high CRI of 96 and a TLCI of 98 for precise color rendering. The fixture produces a soft single-source shadow pattern owing to the integrated diffusion.
The Lyra comes with a multi-voltage AC power supply but it also has a battery-powered option thanks to the inclusion of Gold Mount and V-Mount battery plates, while the four-leaf barndoors provide control over light spill, and feature removable light intensifiers to suit your taste. The yoke is angled forward 30° , which allows you to open the barndoors all the way without hitting the yoke when the light is pointed straight forward. The fixture also has a combo Baby receiver/Junior pin on the yoke so you can mount it on a stand or hang it from a grid with optional clamps.
Color Temperature Adjustment and Dimming
The big yellow knob on the back of the unit controls both the color temperature selection and the dimming of the unit. It features an indent for fingertip control and is positioned at the edge of the fixture, which is cut away allowing you to adjust the knob from the side of the unit when the back is difficult to access. When you power on the light the yellow dimming knob defaults to controlling the dimming, pressing in the knob switches it to color temperature control (3200 to 5600K), pressing it again reverts back to dimming.
Consistent Light Levels
The light output stays consistent as you transition across the color temperature range, preventing the brightness spike that happens with many LED lights around 4300K.
Soft Source, Single Shadow
The 1/2 white diffusion softens the light and provides a 110° beam spread and a single source shadow.
Removable Intensifiers
While some users may enjoy the small increase in light output that intensifiers bring, other users prefer to use barndoors without intensifiers. The removable intensifiers that come with this light attach securely to the barndoors. You do not have to attach all four intensifiers, which allows you choose how many barndoors to use for bumping up your output and how many barndoors to use to cut spill. The top and bottom barndoors integrate gel clips for attaching diffusion or gels.
Battery Power
The fixture features an interchangeable Gold Mount battery plate. Removing four screws and disconnecting the snap connector allows you to swap out the included V-Mount plate.
LCD Info Screen
On the back of the fixture is an LCD info screen that displays the battery power remaining, brightness percentage and color temperature.
EAN: 847983016136
ikan Lyra LB5 Bi-Color LED Light Panel
The Lyra LB5 Bi-Color Soft LED Panel from ikan is built into a heavy-duty molded plastic chassis providing a lightweight yet strong variable color fixture with enhanced features such as 100-10% flicker-free dimming and an LCD display. It features an integrated 1/2 stop diffuser for extra softness, while its 510 LEDs produce a 110° beam spread with a high CRI of 96 and a TLCI of 98 for precise color rendering. The fixture produces a soft single-source shadow pattern owing to the integrated diffusion.
The Lyra comes with a multi-voltage AC power supply but it also has a battery-powered option thanks to the inclusion of Gold Mount and V-Mount battery plates, while the four-leaf barndoors provide control over light spill, and feature removable light intensifiers to suit your taste. The yoke is angled forward 30° , which allows you to open the barndoors all the way without hitting the yoke when the light is pointed straight forward. The fixture also has a combo Baby receiver/Junior pin on the yoke so you can mount it on a stand or hang it from a grid with optional clamps.
Color Temperature Adjustment and Dimming
The big yellow knob on the back of the unit controls both the color temperature selection and the dimming of the unit. It features an indent for fingertip control and is positioned at the edge of the fixture, which is cut away allowing you to adjust the knob from the side of the unit when the back is difficult to access. When you power on the light the yellow dimming knob defaults to controlling the dimming, pressing in the knob switches it to color temperature control (3200 to 5600K), pressing it again reverts back to dimming.
Consistent Light Levels
The light output stays consistent as you transition across the color temperature range, preventing the brightness spike that happens with many LED lights around 4300K.
Soft Source, Single Shadow
The 1/2 white diffusion softens the light and provides a 110° beam spread and a single source shadow.
Removable Intensifiers
While some users may enjoy the small increase in light output that intensifiers bring, other users prefer to use barndoors without intensifiers. The removable intensifiers that come with this light attach securely to the barndoors. You do not have to attach all four intensifiers, which allows you choose how many barndoors to use for bumping up your output and how many barndoors to use to cut spill. The top and bottom barndoors integrate gel clips for attaching diffusion or gels.
Battery Power
The fixture features an interchangeable Gold Mount battery plate. Removing four screws and disconnecting the snap connector allows you to swap out the included V-Mount plate.
LCD Info Screen
On the back of the fixture is an LCD info screen that displays the battery power remaining, brightness percentage and color temperature.
EAN: 847983016143
ikan Heavy Duty Light Stand
The ikan Heavy Duty Light Stand is a 7.6 aluminum stand which supports up to 14 lb. It has a 5/8" top stud and folds down to 37.7 inches.
ikan Lyra LB10 Bi-Color LED Light Panel Specs
Light Fixture
| Item Type | 1 x LED Light Panel |
| Included Light Modifier | 1 x Barndoors with Removable Intensifier |
| Included Filters | Soft Diffusion (Built-In) |
| Included Storage Case | None |
| Lumens | Not Specified by Manufacturer |
| Photometrics | 3200K: 201 fc / 2169 Lux at 3.3` / 1 m* 24 fc / 264 Lux at 9.8` / 3 m 5600K: 231 fc / 2491 Lux at 3.3` / 1 m* 28 fc / 306 Lux at 9.8` / 3 m *Standardized Measurement Calculated Internally Based on Closest Distance |
| Color Temperature | 3200 to 5600K |
| Color Accuracy Standard | CRI 96 at 3200K CRI 96 at 5600K TLCI 98 at 3200K TLCI 98 at 5600K |
| Cooling System | Passive |
| Dimming | Yes, Built-In Dimmer 10 to 100% (Stepped) |
| Beam Angle | 110° |
| Built-In Flash | No |
| Front Accessory Mount | Proprietary |
Connectivity
| Wireless Remote Control Type | Radio/RF *Remote Included |
| Mobile App Compatible | No *As of February, 2023: Check with manufacturer for the most up-to-date compatibility |
Power & I/O
| Power Source | AC to DC Adapter (Included) Battery (Not Included) |
| Inputs/Outputs | 1 x XLR 4-Pin Power Input |
| Battery Plate Type | 1 x Gold Mount (Included) 1 x V-Mount (Included) |
| Battery | 1 x Rechargeable (Not Included) |
| AC Input Power | 110 to 220 VAC, 50 / 60 Hz |
| DC Input Power | 18 VDC |
| Included Adapter / Cable | 1 x Edison Plug to XLR 4-Pin AC to DC Adapter |
| Inline Switch | No |
| Power Pass-Thru | No |
| Power Consumption | 74 W |
Mounting
| Yoke Type | Manually-Operated Yoke |
| Fixture Mounting | 1 x 1-1/8" Stud with 5/8" Receiver (Via Yoke Mount) |
Environmental
| Environmental Protection | Advertised as Dust Resistant *Manufacturer Testing: IP20 |
| IP Rating | IP20 |
General
| Display | None |
| Materials | Resin (Housing) |
| Dimensions | 14 x 14 x 3" / 35.6 x 35.6 x 7.6 cm (Fixture) |
| Weight | 6 lb / 2.7 kg |
Packaging Info
| Package Weight | 12.5 lb |
| Box Dimensions (LxWxH) | 21 x 18 x 5.6" |
ikan Lyra LB5 Bi-Color LED Light Panel Specs
Light Fixture
| Item Type | 1 x LED Light Panel |
| Included Light Modifier | 1 x Barndoors with Removable Intensifier |
| Included Filters | Soft Diffusion (Built-In) |
| Included Storage Case | None |
| Lumens | Not Specified by Manufacturer |
| Photometrics | 3200K: 106 fc / 1145 Lux at 3.3` / 1 m* 11 fc / 123 Lux at 9.8` / 3 m 5600K: 123 fc / 1327 Lux at 3.3` / 1 m* 13 fc / 140 Lux at 9.8` / 3 m *Standardized Measurement Calculated Internally Based on Closest Distance |
| Color Temperature | 3200 to 5600K |
| Color Accuracy Standard | CRI 96 at 3200K CRI 96 at 5600K TLCI 98 at 3200K TLCI 98 at 5600K |
| Cooling System | Passive |
| Dimming | Yes, Built-In Dimmer 10 to 100% (Stepped) |
| Beam Angle | 110° |
| Built-In Flash | No |
| Front Accessory Mount | Proprietary |
Connectivity
| Wireless Remote Control Type | Radio/RF *Remote Included |
| Mobile App Compatible | No *As of February, 2023: Check with manufacturer for the most up-to-date compatibility |
Power & I/O
| Power Source | AC to DC Adapter (Included) Battery (Not Included) |
| Inputs/Outputs | 1 x XLR 4-Pin Power Input |
| Battery Plate Type | 1 x Gold Mount (Included) 1 x V-Mount (Included) |
| Battery | 1 x Rechargeable (Not Included) |
| AC Input Power | 110 to 220 VAC, 50 / 60 Hz |
| DC Input Power | 18 VDC |
| Included Adapter / Cable | 1 x Edison Plug to XLR 4-Pin AC to DC Adapter (15 VDC at 7 A) |
| Inline Switch | No |
| Power Pass-Thru | No |
| Power Consumption | 150 W |
Mounting
| Yoke Type | Manually-Operated Yoke |
| Fixture Mounting | 1 x 1-1/8" Stud with 5/8" Receiver (Via Yoke Mount) |
Environmental
| Environmental Protection | Advertised as Dust Resistant *Manufacturer Testing: IP20 |
| IP Rating | IP20 |
General
| Display | None |
| Materials | Resin (Housing) |
| Dimensions | 14 x 8 x 3" / 35.6 x 20.3 x 7.6 cm (Fixture) |
| Weight | 4 lb / 1.8 kg |
Packaging Info
| Package Weight | 9 lb |
| Box Dimensions (LxWxH) | 17.6 x 15.6 x 5.5" |
ikan Heavy Duty Light Stand Specs
| Stand Type | 1 x General Purpose Stand |
| Maximum Working Height | 95" / 241.3 cm |
| Minimum Working Height | 38.5" / 97.8 cm |
| Load Capacity | 8 lb / 3.6 kg |
| Closed Length | 36" / 0.9 m |
| Stand/Column Top Mount | 5/8" Stud |
Features
| Accepts Second Riser | No |
| Air Cushioned | No |
| Detachable Base | No |
| Leveling Leg | No |
| Reverse Legs | No |
General
| Number of Sections | 3 |
| Footprint Diameter | 41.34" / 1 cm |
| Leg Shape | Round |
| Finish | Black |
| Material | Aluminum |
| Weight | Not Specified by Manufacturer |
Packaging Info
| Package Weight | 4.3 lb |
| Box Dimensions (LxWxH) | 40 x 4.4 x 3.9" |
In the Box
- Gold Mount Battery Plate
- V-Mount Battery Plate
- ikan Power Supply Adapter for Lyra LB10 and LW10 LED Lights
- Barndoors with Removable Intensifiers
- Yoke with Stand Receiver/Pin
- 2-Year Manufacturer Warranty
- Gold Mount Battery Plate
- V-Mount Battery Plate
- ikan AC Adapter for LB5 / LW5 / MB8 / MW8 / RB5 / RW5 LED Lights
- Barndoors with Removable Intensifiers
- Yoke with Stand Receiver/Pin
- 2-Year Manufacturer Warranty
- 2-Year Warranty
No posts found
