EAN: 847983016167
The Lyra LW5 Daylight LED Light Panel from ikan is built into a heavy duty molded plastic chassis providing a lightweight yet strong fixture with enhanced features such as 100-10% flicker-free dimming, LCD display, and an included wireless remote. It features an integrated diffuser and houses 255 LEDs and produces a 110° beam spread. The fixture produces a soft single-source shadow pattern owing to the integrated diffusion.
The fixture is DC powered, incorporating a 4-pin XLR connector and including an AC/DC power supply for mains power. Interchangeable Gold Mount/V-Mount plates are included so no worrying about getting the fixture that matches your battery system. The four-leaf barndoors provide control over light spill, and feature removable light intensifiers to suit your taste. The yoke is angled forward 30° , which allows you to open the barndoors all the way without hitting the yoke when the light is pointed straight forward. The fixture also has a combo baby pin/junior stud mount so you can mount it on a stand or hang it from a grid with optional clamps.
Dimming Adjustment
The big yellow knob on the back of the light controls dimming. It features an indent for fingertip control and is positioned at the edge of the fixture, which is cut away allowing you to adjust the knob from the side of the unit when the back is difficult to access. You can also use the included wireless remote to control the dimming.
Soft Source, Single Shadow
The 1/2 white diffusion softens the light and provides a 110° beam spread and a single source shadow.
Removable Intensifiers
While some users may enjoy the small increase in light output that intensifiers bring, other users prefer to use barndoors without intensifiers. The removable intensifiers that come with this light attach securely to the barndoors. You do not have to attach all four intensifiers, which allows you choose how many barndoors to use for intensifying your output and how many barndoors to use to cut spill.
The top and bottom barndoors integrate gel clips for attaching diffusion or gels.
Battery Power
The fixture features an interchangeable Gold Mount battery plate. Reong four screws and disconnecting the snap connector allows you to swap out the included V-mount plate.
LCD Info Screen
On the back of the fixture is an LCD info screen that displays the battery power remaining and brightness percentage.
ikan Heavy Duty Light Stand
The ikan Heavy Duty Light Stand is a 7.6 aluminum stand which supports up to 14 lb. It has a 5/8 top stud and folds down to 37.7 inches.
ikan Heavy Duty Light Stand Specs
| Stand Type | 1 x General Purpose Stand |
| Maximum Working Height | 95" / 241.3 cm |
| Minimum Working Height | 38.5" / 97.8 cm |
| Load Capacity | 8 lb / 3.6 kg |
| Closed Length | 36" / 0.9 m |
| Stand/Column Top Mount | 5/8" Stud |
In the Box
- AB Mount Battery Plate (Attached)
- V-Mount Battery Plate
- Power Supply with 4-Pin XLR Cable
- Remote Control
- Yoke with Stand Receiver/Pin
- 2 Years Manufacturer Warranty
- 2 Years Warranty
- 2 x Stand Bags
- 2 x Light Kit Bags
No posts found
