This is a tungsten-balanced Mole-Richardson JuniorLED 200W 8 Fresnel with DMX for Grid Mounting. Fresnels have been a staple in Hollywood since 1936 and little has changed except the use of better materials with more precise construction techniques. While there wasn t a problem with the Fresnel s quality of light, heat and electrical draw was another story.
Apart from the black powder-coated finish, the JuniorLED head looks and performs the same as a legacy light allowing you to swap a standard light for a JuniorLED or mix them. In fact, there s a retro-fit kit available to convert your old style light to an LED.
On-board and DMX dimming means you ll probably be restricting your scrimming to half-scrims, saving you a lot of ladder climbing. The JuniorLED has a low maximum draw as compared to the legacy lamp effecting up to an 80% reduction in energy consumption. This means that you can run double the amount of LEDs as legacy lights without raising the temperature. Cooler operation also means less air-conditioning running costs in the studio. Let s also consider the cost and downtime of re-lamping. LEDs last about 50,000 hours and are virtually maintenance-free. The 90-250 VAC JuniorLED has a 8 lens, passive cooling and aluminum alloy and steel construction. It has 13-degree to 54-degree spot to flood variation and a yoke with a 1/1/8 pin for standard Junior stands and accessories. The JuniorLED is supplied with a 36 short cable for grid mounting and a NEMA5-15 Edison plug.
Benefits
MoleLED Technology
MoleLED Fresnels are powered by a proprietary, patent-pending Mole-Richardson Quantum Dot chip on-board LED module. The benefit of QD LED technology is the ability to specifically tune the visible wavelength at the nano scale which, in this case, allows for precise adjustment of the red spectrum without impacting the overall light output of the LED.
Photometrics
Maximum Flood
620 fc/6674 lux at 5.0 (1.5 m) with 3.4 (1.0 m) beam diameter
160 fc/1722 lux at 10 (3.0 m) with 6.8 (2.1 m) beam diameter
70 fc/754 lux at 15 (4.6 m) with 10.3 (3.1 m) beam diameter
Maximum Spot
1800 fc/19,375 lux at 5.0 (1.5 m) with 1.1 (0.3 m) beam diameter
450 fc/4844 lux at 10 (3.0 m) with 2.3 (0.7 m) beam diameter
200 fc/2153 lux at 15 (4.6 m) with 3.4 (1.0 m) beam diameter
Mole-Richardson JuniorLED Tungsten Specs
Light Fixture
| Item Type | 1 x LED Fresnel |
| Photometrics | Flood Beam: 1394 fc / 15,016 Lux at 3.3` / 1 m* 620 fc / 6674 Lux at 4.9` / 1.5 m 159 fc / 1722 Lux at 9.8` / 3 m Spot Beam: 4049 fc / 43,594 Lux at 3.3` / 1 m* 1799 fc / 19,375 Lux at 4.9` / 1.5 m 450 fc / 4844 Lux at 9.8` / 3 m *Standardized Measurement Calculated Internally Based on Closest Distance |
| Color Temperature | 3200K |
| Color Accuracy Standard | CRI 95 |
| Cooling System | Passive |
| Beam Angle | 13 to 54° |
| Front Accessory Mount | 9" |
Lens
| Lens Type | Fresnel |
| Lens Diameter | 8" / 20.3 cm |
| Lens Material | Borosilicate Glass |
Power & I/O
| Power Source | AC Power (Cable Included) |
| Inputs/Outputs | 1 x powerCON Power Input 1 x XLR 5-Pin DMX Input 1 x XLR 5-Pin DMX Output |
| AC Input Power | 90 to 250 VAC, 50 / 60 Hz at 2 A |
| Included Adapter / Cable | 1 x Edison Plug to powerCON Cable (25` / 7.6 m) |
| Inline Switch | Yes |
| Power Pass-Thru | No |
| Power Consumption | 200 W |
| DMX Standby Current | <0.1 A |
| Fuse | 2 A / Slow-Blow |
Mounting
| Yoke Type | Manually-Operated Yoke |
| Fixture Mounting | 1 x 1-1/8" Stud (Via Yoke Mount) |
Environmental
| Environmental Protection | Advertised as Dust Resistant *Manufacturer Testing: IP30 |
| IP Rating | IP30 |
General
| Display | None |
| Certifications | RoHS, UL *as per Manufacturer |
| Materials | Aluminum, Steel (Housing) |
| Dimensions | 20.6 x 14 x 12" / 5.24 x 3.56 x 3.05 cm (Fixture) |
| Weight | 14 lb / 6.4 kg |
In the Box
- Mole-Richardson JuniorLED 200W 8" Fresnel with DMX for Grid Mounting (Tungsten)
- 2-Year Manufacturer Warranty
No posts found
