ARRI Four-Light Fresnel Mini Kit

ARRI 150W Tungsten Fresnel (220 VAC)

The ARRI 150W Tungsten Fresnel is a small Fresnel with great performance and location-tough construction with a 2 Fresnel lens. Superior optical performance and ARRI s cast and extruded aluminum housing make this the perfect small Fresnel. This is a 220V version of the ARRI 150 light and uses 220V lamps. All bulbs must be purchased separately.

Bulb is not included.

Lamp Specifications

This unit uses an A1248 lamp for 230 VAC current. Do not attempt to adapt this fixture for use with 110 to 120 voltage the wiring is not designed for the higher amperage of lower voltage. For 110 to 120 VAC, use model #ARF150.

Mounting

Along with the other ARRI Fresnels, the 150W will mount on all stands and mounting accessories with a 5/8 stud. All lamps must be purchased separately.

Optional Accessories

The use of barndoors, scrims, snoots, and filter frames adds to the superb lighting quality produced by this light.

ARRI 4-Leaf Barndoor Set for ARRI 150W Fresnel

The ARRI 4-Leaf Barndoor Set for the 150W Fresnel is used to control the shape of the light emitted from the fixture. It can be used to screen backgrounds, control reflections, or narrow the lighting angle of a particular reflector. ARRI barndoors are heat resistant.

ARRI Filter Frame for 150 Watt Fresnel

Arri Filter Frames are circular and heat resistant. Filters can be cut and sandwiched into them, and they slide into lamphead accessory holders. Sizes are a little bit larger than the fresnels.

ARRI Full Single Scrim for 150W Fresnel (3 )

This is an ARRI Full Single Scrim that fits the 150W Fresnel or any fixture that accepts a 3 accessory. Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.

ARRI makes four different types of scrims:

• Full Single: This scrim covers the entire lightface and reduces the intensity of the entire light beam.
• Full Double: This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
• Half Single: This scrim only covers half of the lightface reducing half of the light intensity.
• Half Double: This scrim is the same as the half single but reduces light intensity twice as much.

ARRI Full Double Scrim for 150W Fresnel (3 )

This is an ARRI Full Double Scrim that fits the 150W Fresnel or any fixture that accepts a 3 accessory. Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.

ARRI makes four different types of scrims:

• Full Single: This scrim covers the entire lightface and reduces the intensity of the entire light beam.
• Full Double: This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
• Half Single: This scrim only covers half of the lightface reducing half of the light intensity.
• Half Double: This scrim is the same as the half single but reduces light intensity twice as much.

Half scrims may be rotated in position for more precise control.

ARRI A1248 Lamp for Arri 150W Fresnel (220V)

EAN: 043168884921

This is a 150 watt, 230 volt bulb for the Arri 150 watt, 220 volt Fresnel fixture.

ARRI 300W Plus Tungsten Fresnel (120-240 VAC)

The silver/blue 300W Plus Fresnel from ARRI is a 4 lb, 9.17 x 8.7 x 6.3 , 300 W fixture with a versatile 3 Fresnel lens. With a spot-to-flood range of 15° to 49° , it allows you to pinpoint hard light on your subject or wash it in a soft, wide field of light with a simple twist of a knob. Separately purchased 4-way barndoors permit further control of the beam, allowing you to direct the light where you want it and keep it from areas that you don t. The 300 Plus Fresnel accepts optional 120-240 VAC lamps such as the FSL or FKW that are 0-100% adjustable with an external dimmer and ready for worldwide use. The 300 Plus Fresnel s yoke has an integrated 5/8 receiver for mounting on stands or accessories with a 5/8 stud or spigot.

Benefits

• High-quality lenses and reflectors for excellent optical performance
• Compact size and lightweight
• Robust construction of rust-resistant, extruded, die-cast aluminum
• Easy and convenient operation
• Quick and easy service access
• Extensive range of accessories

ARRI Ceiling Scissor Clamp with 5/8 Stud

This scissor clamp is for mounting small light fixtures from a drop ceiling frame. It features a standard 5/8 (baby) mounting stud.

ARRI 4-Leaf Barndoor Set for 300W Fresnel, 125W HMI, 200W Pocket PAR

The ARRI 4-Leaf Barndoor Set for the 300W Fresnel, 125W HMI Fresnel, and 200W Pocket-Lite and Pocket PAR is used to control the shape of the light emitted from the fixture. It can be used to screen backgrounds, control reflections, or narrow the lighting angle of a particular reflector. ARRI barndoors are heat resistant.

ARRI Filter Frame for 300W and 125W Fresnels

Arri Filter Frames are circular and heat resistant. Filters can be cut and sandwiched into them, and they slide into lamphead accessory holders. Sizes are a little bit larger than the fresnels.

ARRI Full Single Scrim (5 )

This Full Single Scrim from ARRI is a modifier that attaches to the 5 accessory mount on your ARRILITE 600, 300 Fresnel, 125W HMI, or other compatible lighting fixture to reduce light output and create specular highlights. The full single design allows this scrim to fully cover the light and to reduce all of the light being output.

ARRI Full Double Scrim (5 )

This Full Double Scrim from ARRI is a modifier that attaches to the 5 accessory mount on your ARRILITE 600, 300 Fresnel, 125W HMI, or other compatible lighting fixture to reduce light output and create specular highlights. The full double design allows this scrim to fully cover the light and to modify and soften all of the light being output. This full double scrim provides twice the light reduction when compared to the ARRI Full Single scrim.

ARRI AS-01 Lightweight Light Stand 8.5

The 8.5 ARRI Lightweight Light Stand is designed to hold small light fixtures like the ARRI Fresnel 150. It packs easily for location work.

Three riser sections.

ARRI 571194W 3-Light Case with Wheels

The Arri 571194W 3-Light Case with Wheels is a vacuum molded hard shell ABS plastic case embossed with the ARRI logo. It is designed to hold up to three Arri 150W, 300W or 650W fresnel lights or up to three 650W or 1000W tungsten flood lights plus soft box, light stands and accessories. The case has fixed dividers that customize the interior. It can be transported by surface mounted, spring-loaded side and top carry handles plus built-in wheels.

Vacuum molded ABS plastic shell case with aluminum trim and convoluted foam inside the lid

Fixed interior dividers

Surface mounted butterfly latches

Carrying options

• Surface mounted, spring-loaded side carry handle
• Surface mounted, spring-loaded top carry handle
• Built-in skate wheels

Compatible with

• Three Arri 150, 300 or 650 Fresnel
• Three Arrilite 650 or 1000 tungsten flood lights