EAN: 807955011125
The Quantum FreeXwire FW8R Receiver can be used to receive a wireless radio flash trigger signal from an FW10w or FW9T transmitter connected to the camera. Or can be used to receive wireless TTL information when connected to the Qflash T5d and a Dw series QTTL adapter on the camera.
The FW8R receiver can also be used as a receiver hooked up to the camera with a Quantum Two-Step Motor Drive cord to allow for remote wireless triggering of the shutter release. With a 2-step cord you keep your camera`s meter and focus function continuously on (as in pressing the shutter button half way).
8 Independent Channels
FreeXwire has eight unique Channel Codes. FreeXwire units set to one Channel cannot activate FreeXwires set to different Channels. You control the Channel Code to make FreeXwire units work together or independently, as required. There are 32 individual Channel/Zone settings at your disposal, and 256 possible lighting combinations.
4 Zone Control Plus Local
FreeXwire controls one Local Zone and four wireless Zones for flash or motor drive. You can activate any one Zone, or any combination of Zones 1,2,3,4 and Local. Switch your lighting instantly, remotely. Select and trigger flashes, cameras, or combinations of them, from your remote position.
Wireless Digital Camera TTL
A FreeXwire connected to a `Dw` series adapter transmits the camera`s f/stop, ISO, and TTL information to any number of remote FreeXwire /Qflash combinations. A `local` Qflash will synchronize also.
Wireless Auto
Without a TTL adapter, a local Qflash & FreeWire can control exposures of any number of remote Qflash/FreeXwire combinations.
Two Special Motor Drive Features
Two-step cord keeps your camera meter and focus function continuously on (as in pressing the shutter button half way). The camera will be ready for instant shutter release. Or, select motor drive `delay` to command a camera to `wake up`, focus and meter, then release the shutter.
Small Size
Compact and light, and antenna folds out of the way for compact storage.
Quantum Instruments FW8R Specs
Wireless
| Channels | 8 |
| Groups | 4 |
| Wireless Range | 500 to 1000` / 152 to 305 m |
General
| Control Modes | TTL |
Electrical
| Battery Type | 2 x AAA |
Physical
| Dimensions | Receiver: 3.6 x 2.3 x 1.1" / 9 x 6 x 2.8 cm |
| Weight | 4.3 oz / 121.9 g |
Packaging Info
| Package Weight | 0.6 lb |
| Box Dimensions (LxWxH) | 6.5 x 5.6 x 2" |
In the Box
- Quantum Instruments FW8R FreeXwire Wireless Digital TTL Receiver
- Pole Mounting Kit
- Touch Fastener Mounting Pads
- 2 Year Manufacturer Warranty
Not in the Box
- Essential
No posts found
