EAN: 689670192187
RadioPopper has put together this Jr2 Studio Kit for Canon with 2 Receivers to give photographers the benefit of wireless triggering and power control at distances from 300-1750` away. The kit includes 1 Jr2 Transmitter and 2 Receivers.
Transmitter
The RadioPopper Jr2 Transmitter is a 16-channel, 4-group radio transmitter that operates on the 902-928 MHz, ISM band and is capable of adjusting the output of the flash using the kit`s Jr2 receivers for Canon E-TTL/II flash units. Triggering and power control from distances of 300-1750` depending on conditions and environment is possible.
The transmitter`s simplified, intuitive backlit display works on an easy to use button and dial design that indicates power levels, group selection, radio channel selection local or remote control and remaining battery power. The transmitter gets 20 hours of run time on 2 AAA batteries and weighs 1.7 oz. Triggering at sync speeds up to 1/500 sec is possible with cameras that have leaf shutters. The Jr2 Transmitter will also trigger a wide variety of RadioPopper receivers besides the Jr2 receiver but without power control.
Receiver
The RadioPopper Jr2 Receiver for Canon is a 16-channel, 4-group radio receiver that operates on the 902-928 MHz ISM band and is capable of adjusting the output of the flash using the kit`s Jr2 Transmitter. Triggering and control range with both methods is from 300-1750` depending on conditions and environment.
The Jr2 receiver`s simplified, intuitive backlit display works on an easy 2-button-Menu/Select principle that indicates power level, local, or remote control and remaining battery power. The receiver gets 8-10 hours of run time on 2 AAA batteries and weighs 1.9 oz. A 3.5mm sync cable, phono plug adapter, and 2.5mm adapter are included.
No posts found
