The white Selador Desire D40 Lustr+ LED Fixture with Edison Connector from ETC combines 40 Luxeon Rebel emitters in one unit, for bright, efficient lighting. The PAR-shaped washlight is a multipurpose tool that can be combined into a rig with conventional fixtures or used by itself. It features efficient primary lenses and careful color choices making it useful for stage and studio applications where strong color and high intensity are required.
By combining up to seven LED colors per fixture, the x7 Color System creates a balanced blend of deep, saturated colored or natural white light. And with the Desire luminaires, you get even more color flexibility through the Adaptive Color Control system. The Selador x7 Color System produces a wide range of spectrally balanced, saturated, and tinted color choices.
The user-interface on the rear of the unit puts the control in your hands “ the Desire luminaire can be managed by any RDM-enabled controller or on their own. The fixture offers Quick Setup options, so you can quickly and easily adjust the luminaire's performance.
The additional red-shift option allows the Desire fixture to mimic a tungsten fade, and the Plus 7 Mode gives you control over each LED color to increase or decrease individual colors. Using the built-in color-pickers on ETC lighting control consoles (sold separately), you can pick a gel match for the Desire fixtures to produce, or you can modify the color to get the exact shade you want.
You get amazing all-around theatrical-quality light from the D40 Lustr+ array. The x7 Color System is optimized in Lustr+ units to create clean white and tinted light, to bring out the beauty of set pieces and render individual skin tones naturally.
A rugged, die-cast enclosure, noiseless fan-free operation, multiple lens options, and advanced user interface make this fixture a great choice for multiple applications.
Note:
All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. Ambient temperatures and orientation affect thermal conditions. Based on the LED manufacturer's B50 l70 specification, a Selador luminaire will achieve approx. 70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels, which may eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs.
D40 Lustr+ front light wash fixture is optimized for skin tones and light tints for use as a theatrical front light
Six colors plus high-intensity white LEDs create a front light wash fixture for full range color, with an emphasis on lighter colors and white
40 LED color mixing wash fixture
Rated for IP20 dry location use
Power and DMX in / thru connections for easy setup
User-friendly control interface with multiple modes and fixture settings
Rugged, die-cast all-metal housing
Easy access slots for secondary lenses and standard 7.5" (190mm) PAR accessories
Hanging yoke is standard; optional yoke / floor stand available
Neutrik power in and thru connections (dry location version)
Up to 10 fixtures may be linked via power in / thru connectors per 15A circuit using 1mm² cables as supplied
Requires power from a non-dim source
50,000 hour LED life (50,000 hours to 70% intensity)
40 Luxeon Rebel 2.5W LED emitters
Broad spectrum color interacts seamlessly with conventional sources
Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
Exclusive optional red-shift option emulates tungsten dimming performance characteristics
Additional secondary lenses available for multiple beam spread options
Each fixture ships with a very narrow secondary lens
DMX512 in and thru via 5-pin XLR connectors
Multiple control options including RGB, strobe, and console-free Master/Slave mode
15-bit virtual dimming engine provides smooth, high quality theatrical fades
RDM functionality for address and setting changes
Active electronic thermal management for droop-free operation
No-noise, fan-free convection cooling for use in acoustically sensitive installations
Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free airflow around fixture housing
Primary field angle of 17°
Round and oblong beam-diffusers (sold separately)
UL 1573-rated for indoor use
No posts found
