The Angler 1-Light Fashion Kit was put together by to allow photographers to fully explore the potential of the unique Beauty Reflector light shaper using a sophisticated flash head. The kit includes an Angler 300W/s monolight, a 5" reflector, an 8 air-cushioned stand, a 16" beauty reflector, a reflector adapter, and a 40-degree grid.
Glamour Flash 300Ws
The Glamour Flash 300Ws Monolight from Angler combines affordability with dependable basic functionality. Power is adjustable from 1/16 to full power over four stops via touchpad buttons. Settings are displayed on the large LED screen. The 100W modeling lamp can be set from full power, for maximum visibility, to Proportional, to simulate power adjustments for previewing your shot. Recycling is a fast 2 seconds and far shorter at reduced power settings. The Glamour Flash has an industry-standard 5/8" receiver that mounts to a wide variety of light stands, while the housing is rubber-coated to provide a grippy surface and protection from impact damage. The flash head can be triggered with the head s test button, a built-in wireless optical slave, or with the included sync cord. The Glamour Flash comes with a user-replaceable flash tube, power cord, 100W modeling lamp, 7" grid reflector and a protective cap.
Light Stand
This aluminum, 8 Impact Air-Cushioned Light Stand is a 4-section light support with sure-twist section locks. If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.
Beauty Reflector
The 16" Beauty Reflector from Angler gets its name from the popularity of this light shaper with fashion and portrait photographers.Recommended for strobes, the light source is bounced off of a centrally positioned deflector and directed to fill the neutral white reflector interior. The result is a signature soft dispersed look, but with crispness, ideal for hair and makeup, that you can t get from umbrellas and softboxes. An added feature is the natural-looking catchlights that appear in the subject s eyes. Optional accessories include a diffusion sock to soften it.
40° Grid
The grid for the 16" Beauty Reflector is a matte black aluminum light shaping accessory that snaps onto the reflector and reduces its wide beam to 40 degrees. The grid controls spill light and gives the user more directional control while adding a bit of contrast to the light quality for a more painterly look.
Beauty Reflector Adapter
The EGD-LPS Beauty Reflector Adapter is a sturdy, interchangeable aluminum alloy mount that allows you to use your flash with this Angler reflector. Besides The Glamour Flash Head in this kit, it is also compatible with Interfit Stellar, Bowens, Calumet Travelite, Cowboy, JTL, Photoflex, Rime Lite, Impact monolights, and Westcott flash heads.
Angler Glamour Flash 300Ws Monolight
The Glamour Flash 300Ws Monolight from Angler combines affordability with dependable basic functionality. Power is adjustable from 1/16 to Full power over four stops via touchpad buttons. Settings are displayed on the large LED screen. The 100W modeling lamp can be set from full power for maximum visibility to Proportional to simulate power adjustments to enable previewing of your shot. Recycling is a fast 2 seconds and far shorter at reduced power settings. The Glamour Flash has an industry standard 5/8" receiver that mounts to a wide variety of light stands while the housing is rubber-coated to provide a grippy surface and protection from impact damage. The flash head can be triggered with the head s test button, a built-in wireless optical slave or with the included sync cord. The Glamour Flash comes with a user-replaceable flash tube, power cord, 100W modeling lamp, 7" grid reflector and a protective cap.
LED Screen
Highly visible LED screen makes the power setting adjustment easy even in dim light
Adjustable Power
Power is adjustable from over 4 stops from 1/16 to Full power
Touchpad Control
Easy to use touch pad instead of switches
Modeling Lamp
Full on mode can be adjusted to proportional mode that automatically matches the flash power so you can preview your lighting
Auto Dump
Flash automatically drains capacitors for accurate exposures when lowering the power
Rubber Coating
Provides a grippy surface and helps protect the flash from impact damage
Optical Slave
Good for multi-light setups, the built-in slave allows the flash to be wirelessly triggered from another flash
Included Sync Cord
The 1/8" (3.5mm) mini-plug sync cord connects camera to flash or optional radio receiver
EAN: 847628589247
Impact Air-Cushioned Light Stand (Black, 8 )
This aluminum Impact Air-Cushioned Light Stand rises to a height of 8 and folds down to 29.6" . The stand has sure-twist section locks and 4 sections and will support up to 8 lb.
If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.
Air Cushioned
Protects equipment from impact damage.
Compact Design
Will fit easily into most location cases.
Accepts Casters
EAN: 847628012349
Angler Beauty Reflector (16" )
The 16" Beauty Reflector from Angler gets its name from the popularity of this light shaper with fashion and portrait photographers.
Recommended for strobes, the light source is bounced off of a centrally positioned deflector and directed to fill the neutral white reflector interior. The result is a signature soft dispersed look, but with crispness, ideal for hair and makeup, that you can t get from umbrellas and softboxes. An added feature is the natural-looking catchlights that appear in the subject s eyes. Optional accessories include a honeycomb grid to tunnel and direct the light output and a diffusion sock to soften it.
Adapters are available for the following studio flash units: Paul C. Buff Alien Bee, Einstein, White Lightning, and Zeus Balcar Flashpoint, Elinchrom, Impact EX, Calumet Genesis, Interfit EX and Stellar, Bowens Calumet Travelite, Cowboy, JTL, Photoflex Rime Lite, Impact monolights, Westcott and Profoto.
Compatibility
Paul C. Buff Alien Bee, Einstein, White Lightning, and Zeus Balcar Flashpoint, Elinchrom, Impact EX, Calumet Genesis, Interfit EX and Stellar, Bowens Calumet Travelite, Cowboy, JTL, Photoflex Rime Lite, Impact monolights, Westcott and Profoto
Optional Accessories
Diffuser sock and honeycomb grid
Unique Qualities
EAN: 847628589674
Angler Beauty Reflector Grid (16" )
This Grid for the 16" Beauty Reflector from Angler is a matte black aluminum light shaping accessory that snaps onto the reflector and reduces its wide beam to 40° . The grid controls spill light and gives the user more directional control while adding a bit of contrast to the light quality for a more painterly look.
EAN: 847628588882
Impact Beauty Dish Adapter for Impact Mo
Angler Glamour Flash 300Ws Monolight Specs
Flash Head
Maximum Power | 300 Ws |
Power Control | 4 Stops in 1/10-Stop Increments |
Guide Number | 180.4` / 55 m at 6.56` / 2 m, ISO 100 (with Reflector) |
Flash Duration | 1/1800 to 1/800 Sec |
Recycle Time | 2 Sec (Full Power) |
Color Temperature | 5600K +/- 200K |
Flash Ready Indicator | Audio, Visual |
Reflector | Changeable |
Accessory Fitting Type | Bowens S Type |
Modeling Light
Type | Tungsten |
Wattage | 100 W |
Control Modes | Full On, Proportional |
Sync
Sync Type | Button, Cable, Optical |
Built-In Wireless Receiver | No |
Sync Voltage | 4.3 V |
Power
AC Input Power | 110 to 220 VAC, 60 Hz |
Circuit Protection | Fuse |
Fuse | 6 A |
General
Display | None |
Mount | 5/8" / 16 mm Receptacle |
Auto Dump | Yes |
Fan Cooled | No |
Dimensions | H: 8.4 x W: 6.1 x L: 11.6" / H: 21.3 x W: 15.5 x L: 29.5 cm, Including Reflector H: 8.4 x W: 5.2 x L: 11.6" / H: 21.3 x W: 13.2 x L: 29.5 cm, Including Cap |
Weight | 3.5 lb / 1.58 kg |
Packaging Info
Package Weight | 7.7 lb |
Box Dimensions (LxWxH) | 21.5 x 10.5 x 6.5" |
Impact Air-Cushioned Light Stand (Black, 8`) Specs
Mounting
Stand/Column Top Mount | 5/8" Stud with 1/4"-20 Male |
Features
Accepts Second Riser | No |
Wheels | Optional |
Air Cushioned | Yes |
General
Stand Type | 1 x General Purpose Stand |
Maximum Working Height | 96" / 243.8 cm |
Minimum Working Height | 34" / 86.3 cm |
Load Capacity | 8 lb / 3.6 kg |
Closed Length | 29.6" / 75.2 cm |
Footprint Diameter | 36" / 91.4 cm |
Leg Shape | Round: 20 mm |
Finish | Black |
Weight | 2.05 lb / 1 kg |
Packaging Info
Package Weight | 2.5 lb |
Box Dimensions (LxWxH) | 29.75 x 3.2 x 3.2" |
Angler Beauty Reflector (16") Specs
General
Item Type | 16" Beauty Dish |
Interior Color | White |
Light Compatibility | Requires Bracket/Speed Ring (Not Included) |
Accepts Grids | Yes (Not Included) |
Light Loss/Gain | None |
Materials | Aluminum |
Dimensions | .: 16 x H: 4.5" / .: 40.6 x H: 11.5 cm |
Weight | 1.85 lb / 0.84 kg |
Packaging Info
Package Weight | 3.4 lb |
Box Dimensions (LxWxH) | 16.9 x 16.6 x 6.6" |
Angler Beauty Reflector Grid (16") Specs
Item Type | 1 x Honeycomb Grid |
Grid Angle | 40° |
Materials | Aluminum |
Dimensions | .: 16" / .: 40.6 cm |
Packaging Info
Package Weight | 1.4 lb |
Box Dimensions (LxWxH) | 11.65 x 9.3 x 1.55" |
Impact Beauty Dish Adapter for Impact Monolights, Bowens, Travelite, Cowboy, Interfit Stellar, JTL, Photoflex, Rime Lite, Westcott Flash Heads Specs
Construction | Aluminum Alloy |
Packaging Info
Package Weight | 0.41 lb |
Box Dimensions (LxWxH) | 6.25 x 6.25 x 2.25" |
In the Box
- Modeling Light (100W)
- Grid Reflector (7")
- Mini to PC Sync Cord
- Protective Cap
- User Manual
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- User Manual
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found