Angler Glamour Flash 300Ws 2-Light Kit

The Angler Glamour Flash 300Ws 2 Light Kit was put together by to provide the foundation of a great core lighting kit for portraits or products. The kit includes two 300Ws monolights complete with flash tubes, modeling lights, and reflectors. Two 8 air-cushioned light stands are also included as is a carrying case to store and transport it all.

Glamour Flash

The Glamour Flash combines affordability with dependable basic functionality. Power is adjustable from 1/16 to full power over four stops via touchpad buttons. Settings are displayed on the large LED screen. The 100W modeling lamp can be set from full power for maximum visibility to proportional to simulate power adjustments for previewing of your shot. Recycling is a fast 2 seconds and faster at reduced power settings. The Glamour Flash has an industry standard 5/8" receiver that mounts to a wide variety of light stands while the housing is rubber-coated to provide a grippy surface and protection from impact damage. The flash head can be triggered with the head s test button, a built-in wireless optical slave or with the included sync cord. The Glamour Flash comes with a user-replaceable flash tube, power cord, 100W modeling lamp, 7" grid reflector, and a protective cap.

8 Air-Cushioned Light Stand

This aluminum 8 light stand is a 4-section light support with sure-twist section locks. If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.

Light Kit Bag

The bag is designed to hold up to three monolights along with their reflectors, four stands, boom, umbrellas, cables, and other support gear but can also be used to hold other lighting equipment instead. You ll have plenty of room to take along enough lighting gear for a portrait session, all packed in an organized and accessible way. A touch fastened divider tray separates the stands, boom, and umbrellas from the lights preventing them from bumping together and causing scratches or damage. For additional equipment such as cables and small accessories, there are three interior 10.5 x 8.0" zippered mesh pockets.

Angler Glamour Flash 300Ws Monolight

The Glamour Flash 300Ws Monolight from Angler combines affordability with dependable basic functionality. Power is adjustable from 1/16 to Full power over four stops via touchpad buttons. Settings are displayed on the large LED screen. The 100W modeling lamp can be set from full power for maximum visibility to Proportional to simulate power adjustments to enable previewing of your shot. Recycling is a fast 2 seconds and far shorter at reduced power settings. The Glamour Flash has an industry standard 5/8" receiver that mounts to a wide variety of light stands while the housing is rubber-coated to provide a grippy surface and protection from impact damage. The flash head can be triggered with the head s test button, a built-in wireless optical slave or with the included sync cord. The Glamour Flash comes with a user-replaceable flash tube, power cord, 100W modeling lamp, 7" grid reflector and a protective cap.

LED Screen

Highly visible LED screen makes the power setting adjustment easy even in dim light

Adjustable Power

Power is adjustable from over 4 stops from 1/16 to Full power

Touchpad Control

Easy to use touch pad instead of switches

Modeling Lamp

Full on mode can be adjusted to proportional mode that automatically matches the flash power so you can preview your lighting

Auto Dump

Flash automatically drains capacitors for accurate exposures when lowering the power

Rubber Coating

Provides a grippy surface and helps protect the flash from impact damage

Optical Slave

Good for multi-light setups, the built-in slave allows the flash to be wirelessly triggered from another flash

Included Sync Cord

The 1/8" (3.5mm) mini-plug sync cord connects camera to flash or optional radio receiver

EAN: 847628589247

Impact Air-Cushioned Light Stand (Black, 8 )

This aluminum Impact Air-Cushioned Light Stand rises to a height of 8 and folds down to 29.6" . The stand has sure-twist section locks and 4 sections and will support up to 8 lb.

If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.

Air Cushioned

Protects equipment from impact damage.

Compact Design

Will fit easily into most location cases.

Accepts Casters

EAN: 847628012349

Impact Light Kit Bag #2 (34 x 13.5 x 12" )

The black Light Kit Bag #2 (34 x 13.5 x 12" ) from Impact makes transporting your lighting kit easy and secure. The bag is designed to hold three monolights along with their reflectors (such as Impact VC500LR), four stands, boom, umbrellas, cables and other support gear but can also be used to hold other lighting equipment instead. You ll have plenty of room to take along enough lighting gear for a portrait session - all packed in an organized and accessible way. A touch fastened divider tray separates the stands, boom and umbrellas from the lights preventing them from bumping together and causing scratches or damage. For additional smaller equipment such as cables and small accessories, there are three interior 10.5 x 8.0" zippered mesh pockets.

The bag is made from soft, padded water-resistant nylon and contains six movable touch fastened interior dividers (6 large, 2 small) that will permit you to configure the bag to accommodate the gear you need that day. The Light Kit Bag is carried by its two 2" wide overlapping top carry handles that can easily be extended into dual shoulder straps. The contents are accessed via dual zippers that when placed together will accept a user-supplied lock. For even more protection, the bottom of the bag contains three rubber feet for when the bag is placed on the ground. And the bag folds down to a quarter of its height for convenient storage and easy setup. Whether for storage or transport, the Impact Light Kit Bag will serve both pro or amateur well.

The soft padded carry case is designed to hold three monolights with reflectors, four light stands, umbrellas, cables and other accessories

The interior has six movable, touch fastened dividers that permit you to configure the bag to suit your needs dividers consist of six large and two smaller styles

2" (5.1 cm) wide overlapping dual carry handles that convert to a shoulder strap

Interior has three zippered 10.5 x 8.0" mesh pockets (26.7 x 20.3 cm)

Touch fastened protective nylon tray separates light stands and umbrellas from monolights

Water-resistant padded nylon construction

Folds down to less then 4" for convenient storage and easy setup

Dual zippered opening accepts user-supplied lock

EAN: 847628030619