Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Elinchrom ELC Pro HD 1000 Flash Head
EAN: 719821377955
The ELC Pro HD 1000 Flash Head from Elinchrom is evidence of the company s continued commitment to pushing the envelope in monolight design. Elinchrom has packed the ELC Pro HD 1000 with professional features we ve come to expect from a flash head of this caliber and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature activated fan keeps the head cool and lengthens the life of both the flash tube and modeling lamp. Apre-flash detector lets you integrate your on-camera flash into your studio system.Built-in EL-Skyport receiver for triggering EL-Skyport with 8 frequency channels with 4 groups EL-Skyport Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras Intelligent pre-flash detector system to enable the use of ELC units with speedlights 8 f-stop range Action-freezing flash durations of 1/1,430 @ full power (t0.5) and as short as 1/5,260 sec. at 80W/s Stable even at fastest recycling times Up to 20 flashes per second Consistent color temperature with +/- 150K° Power Auto-dump Multi-voltage auto-detection: 90-265VAC excluding modeling lamp Low 5V sync voltage safe for all digital camera systems Intelligent low-noise fan spins slower or faster depending on the internal temperature of the unit Impact resistant and fire-retardant body shell Accessory bayonet permits use of the complete range of light modifiers
The Elinchrom Standard
OLED display for information and clarity Dashboard for an enhanced experience Precise control
Flash Modes
Sequence Mode allows you to sequentially trigger up to 20 ELCs, in bursts or as a continuous cycle to utilize the high frame rate of your camera Delayed Mode provides the option of first or second curtain sync and everything in-between Strobo Mode allows you to take a picture with stroboscopic effects in a single frame
EAN: 719821377955
The ELC Pro HD 1000 Flash Head from Elinchrom is evidence of the company s continued commitment to pushing the envelope in monolight design. Elinchrom has packed the ELC Pro HD 1000 with professional features we ve come to expect from a flash head of this caliber and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature activated fan keeps the head cool and lengthens the life of both the flash tube and modeling lamp. Apre-flash detector lets you integrate your on-camera flash into your studio system.
Power, variable continuously from 7 to 1,000W/s, can be mimicked by the 300W proportional modeling lamp to preview your effects. Although Elinchrom provides one, you can swap the sync cord with a separately purchased 8-channel transceiver for wireless triggering from your camera. The head has one built-in to receive the signal. Flash modes allow you to address special situations. The Sequential Mode enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences. Finally, the auto-sensing multi-voltage power supply means that you can use the ELC Pro HD 1000 anywhere in the world.
Features
The Elinchrom Standard
Flash Modes
Elinchrom ELC Pro HD 1000 Specs
Flash Head
| Maximum Power | 7 to 1000 Ws |
| Power Control | 8 Stops in 1/10-Stop Increments |
| Guide Number | 298` / 90.8 m at 3.3` / 1 m, ISO 100 (with Reflector) |
| Flash Duration | t.5: 1/1430 to 1/2780 Sec |
| Recycle Time | 1.2 to 4 Sec |
| Color Temperature | 5500K |
| Flash Ready Indicator | Audio, Visual |
| Reflector | Changeable |
| Accessory Fitting Type | Bowens S Type, Elinchrom Umbrella Shaft |
Modeling Light
| Type | Tungsten |
| Base Type | GX6.35 |
| Wattage | 300 W |
| Control Modes | Free Set, Full On, Proportional |
Sync
| Sync Type | Infrared, Optical, Radio |
| Built-In Wireless Receiver | Yes |
| Wireless Channels / Groups | 8 / 4 |
| System Connection | Barrel 3.5 mm PC Sync |
| Sync Voltage | 5 V |
Power
| AC Input Power | 90 to 265 VAC, 50 / 60 Hz |
| Circuit Protection | Fuse |
General
| Display | OLED |
| Auto Dump | Yes |
| Fan Cooled | Yes |
| Dimensions | H: 8.2 x W: 5.5 x L: 12.4" / H: 21.0 x W: 14.0 x L: 31.5 cm, Including Cap |
| Weight | 6.4 lb / 2.9 kg |
Packaging Info
| Package Weight | 11.1 lb |
| Box Dimensions (LxWxH) | 18.2 x 9.5 x 8.4" |
In the Box
- Elinchrom ELC Pro HD 1000 Flash Head
- Mains Cable
- Sync Cable
- Modeling Lamp (300W)
- Glass Dome
- Protective Cap
- Reflector (6.3"/90°)
- 2-Year Manufacturer Warranty
No posts found
