Neewer Q4 Overview
Adopting an innovative design, Neewer introduces the powerful portable and compact enough for handheld operation. Featuring a 2.4 GHz wireless system with a range of up to 328', the Q4 is a 400Ws flash strobe that features a 5600K color temperature and an impressive guide number of 236'. This monolight is made to work with Canon E-TTL II, Nikon i-TTL, and Sony TTL automatic flash systems, offering three different flash modes. The Q4 runs on a rechargeable lithium-ion battery with a 2800mAh capacity, allowing you to fire the strobe up to 400 times at full power before needing to recharge. The real fun happens when you attach the included top handle to the 8.4 x 7.3 x 2.2" strobe, expanding your mobility. A carry case is also supplied for storage and transport. This configuration of the Q4 includes the QPRO-S TTL wireless trigger for Sony which features a 2.4 GHz system, has a wide range of 328', and can be set to one of 32 channels for maximum reliability and control.
Powerful, Versatile Strobe Light
The Q4 features a high-speed sync mode that works with shutter speeds up to 1/8000 second, offering flash durations from 1/209 to 1/10,989 second to capture and freeze peak action. Beside these characteristics, Neewer manages to keep recycling times low at 0.01-1.2 seconds, while a 30W LED modeling lamp can be used for careful composition.
Details
- Flash Modes: TTL/M/Multi
- Sync Modes: high-speed sync (up to 1/8000 seconds), first curtain sync, and second curtain sync
- Optical Slave Flash: S1/S2
- Delay Flash: 0.01 to 30 seconds
- Stroboscopic Flash: up to 100 times, 199 Hz
- Power Output: 9-stop range from 1/1 to 1/256
- Recycle Time: 0.01 to 1.2 seconds
- Flash Exposure Compensation (FEC): manual
- FEB: +/-3 stops in 1/3 stops increments
- 2.4 GHz wireless system with 32 channels, 5 groups (A, B, C, D, E)
- Runs on an included 21.6V, 2800mAh battery
- The flash can be powered via the included adapter
- Built-in silent fan
- Supports USB-C firmware upgrades
Bowens Mount
The widely compatible Bowens front accessory mount allows you to connect the monolight to various separately available light modifiers, such as reflectors, softboxes, and snoots. A dedicated hole is also available to insert an optional umbrella.
Compatibility
The Q4 wireless receiver mode is compatible with Canon, Nikon, and Sony. This flash fully supports TTL functions when used with a separately available Neewer 2.4 GHz wireless Q transmitters and QPRO flash triggers.
Neewer Q4 Specs
Key Specs
| Item Type | 1x Monolight |
| Includes Flash Tube | Yes |
| Included Light Modifier | 1x Reflector |
| Included Storage Case | Yes |
| Power Range | 400 Ws |
| Power Control | 9-Stop Range in 1/3-Stop Increments |
| Recycle Time | 0.01 to 1.2 Sec |
| TTL Metering | Yes, via Included Transmitter (Sony ADI / P-TTL) |
| Modeling Light | 30 W LED Built-In (5600K) |
| Wireless Remote Control Type | Radio/RF Receiver Built-In & Transmitter Included Optical Receiver Built-In |
| Sync Speed | 1/8000 Sec (High-Speed) |
| Power Source | AC to DC Adapter (Included) Battery (Included) |
| Inputs/Outputs | 1x 1/8" / 3.5 mm Flash Sync Input 1x USB-C Female Service Input |
| Battery | 1x Rechargeable Lithium-Ion, 21.6 VDC, 2800 mAh, 56 Wh (1x Included) 400 Flashes at Maximum Brightness 3.5-Hour Charge Time |
| Fixture Mounting | 1x 5/8" Receiver |
| Weight | 5 lb / 2.3 kg |
Light Fixture
| Item Type | 1x Monolight |
| Includes Flash Tube | Yes |
| Included Light Modifier | 1x Reflector |
| Included Storage Case | Yes |
| Power Range | 400 Ws |
| Power Control | 9-Stop Range in 1/3-Stop Increments |
| Guide Number | 236.2' / 72 m |
| Recycle Time | 0.01 to 1.2 Sec |
| Burst Rate | 20 fps |
| Color Temperature | 5600K +/- 200K |
| Flash Ready Indicator | Audio |
| TTL Metering | Yes, via Included Transmitter (Sony ADI / P-TTL) |
| Cooling System | Fan |
| Umbrella Mount | Yes |
| Front Accessory Mount | Bowens S |
| Replaceable Flash Tube | Yes (User Replaceable) |
Modeling Light
| Modeling Light | 30 W LED Built-In (5600K) |
| On/Off Switch | Yes |
Connectivity
| Wireless | 2.4 GHz Radio/RF *Built-In |
| Wireless Remote Control Type | Radio/RF Receiver Built-In & Transmitter Included Optical Receiver Built-In |
| Mobile App Compatible | No |
| Wireless Channels | 32 |
| Wireless Groups | 5 |
| Wireless Frequency | 2.4 GHz |
| Wireless Range | 328.1' / 100 m (Radio/RF) |
| Flash Duration | 1/10,989 to 1/209 Sec |
| Sync Speed | 1/8000 Sec (High-Speed) |
| Delay Range | 0.01 to 30 Sec |
Power & I/O
| Power Source | AC to DC Adapter (Included) Battery (Included) |
| Inputs/Outputs | 1x 1/8" / 3.5 mm Flash Sync Input 1x USB-C Female Service Input |
| Battery | 1x Rechargeable Lithium-Ion, 21.6 VDC, 2800 mAh, 56 Wh (1x Included) 400 Flashes at Maximum Brightness 3.5-Hour Charge Time |
| Battery Charging | 1x AC to DC Adapter (Included) |
| Input Power | 120 VAC, 60 Hz |
| Included Adapter / Cable | 1x USA Type-A/B Plug to Barrel / Coax AC to DC Adapter |
| Auto Dump | No |
Mounting
| Fixture Mounting | 1x 5/8" Receiver |
General
| Display | LCD |
| Dimensions | 8.3 x 7.3 x 2.2" / 21.2 x 18.5 x 5.5 cm |
| Weight | 5 lb / 2.3 kg |
In the Box
- Neewer Q4 TTL Flash Strobe with QPRO-S Trigger
- Standard Reflector
- Lithium Battery
- Handle
- Power Adapter
- Power Cable
- Carry Case
- 2-Year Manufacturer Warranty
No posts found
