EAN: 689670192538
The Photogenic Ion Lithium-ion Pure Sine Wave Inverter System allows you to take your studio strobes on the road or off the road without electricity and without noisy generators or bulky old-style inverters. Weighing in at only 3.5 lb including its battery, the Ion measures only 7.5 x 4.4 x 3.3 but is able to deliver hundreds or even thousands of full power flashes depending on the flash head in use. For example, Photogenic s 1,000W/s PL1000DR gets 300 full power flashes on a fully charged battery while their AKC160 will get a whopping 2,050 flashes from the same battery. Of course, you can double or triple your capacity by simply purchasing extra batteries which can be charged apart from the inverter. Extra chargers are available to charge more than 1 battery concurrently.
Convenience features include a USB port to power computers and other electronic devices and an LED fuel gauge that allows you to check on remaining power at a glance. The system includes the ION Inverter, battery, charger, light stand clamp and strap.
Note: flash capacity specs are based on Photogenic flash heads but other brands of flash heads may be used with the inverter. Power input is 100 to 265VAC, 50/60Hz but output is 120V only.
For complete specs on the items included in this system please click on the links below: What good is a light if it keeps you in the dark? The 1250DRC keeps you fully informed of your power levels via its large highly readable digital display. Power settings are adjustable in 1/10 or A½ stop increments across 6 stops. The bright 250W modeling light can be set to Proportional to let you previsualize your final shot when using multiple lights. Other settings include Full On, OFF and manual control of the modeling light output. The PL1250DRC recycles to full power in a lightning-fast 1.5 seconds with short flash durations that help you stop every gesture, an attribute which is extremely valuable when working with kinetic subjects like dancers or athletes. The color corrected flash tube prevents blue hues from creeping into the color balance on subjects like a bride in her wedding dress. The tube also insures a flattering skin tone rendition. Convenience features include a test button, optical slave and integral handle.The PL1250DRC comes with a 7.5 reflector and is compatible with a wide range of optional accessories including grids, snoots, parabolic reflectors, softboxes and umbrellas. This is an air-cushioned aluminum stand that rises to a maximum height of 8 . Air cushioning gently lowers the light, preventing damage to both the fixture and fingers when section locks have not been properly tightened.
Photogenic PL1250DRC 500W/s PowerLight Monolight (UV)
EAN: 689670110167
The Photogenic 1250DRC 500W/s PowerLight Monolight (UV) offers speed, power and control, a wide choice of accessories and intuitive operation backed by impressive specs at a very reasonable price.
Six Stop Power Range
Power settings Power levels are displayed in easy-to-read LED digits allowing settings from 16W/s to 500W/s in 1/10 or 1/2 stop increments
Fast Recycling
The PL1250DRC recycles to full power in only 1.5 seconds to catch even the most fleeting gesturers
Modeling Light
The PL1250DRC s bright 250W quartz modeling lamp offers independent power control that is adjustable from full to 1/32 power in 1/10 or 1/2 stop increments. Settings include Proportional, to previsualize lighting effects, Manual adjustment or Full On or Off
Low Trigger Voltage
Digital cameras can be used with Photogenic PowerLights without fear of damage to the camera s electronics
Built-In Slave
This version of the PL1250DR has a built-in, highly sensitive, switchable optical slave for synchronization with other flashes
User Replaceable Flashtube
No tools are required to replace this plug & play flashtube
Ready Indication
Dims the modeling light while charging the capacitors. When the capacitors are at 100%, the modeling lamp re-lights
Color Corrected Flash Tube
The color corrected flash tube filters out blue hues that result from UV emission for a cleaner look with flattering flesh tones.
Auto Dump Function
When reducing the power output, excess flash power in the capacitors is released before exposure to insure consistent performance
Fan Cooled
A low noise, high performance fan keeps the flash head s electronics cool while lengthening the flash tube s and the modeling light s lives
Safety Features
The PL1250DRC incorporates surge protection to handle power spikes and internal thermal protection which monitors heat generated during intense use
System Compatibility
Photogenic 22 Square Softbox with Mount Ring (Silver Interior)
EAN: 689670060516
The 22 Square Softbox with Back Plate and Mounting Ring for Photogenic Flash Heads provides soft, yet intense light for your subjects. The interior is silver for a little extra snap to the light. The spring tension rods fit easily into the softbox and into the included Photogenic speed ring. The front panel is touch-fastener fitted, allowing you to place the panel at the edge or 1.5 into the box for improved light direction.
Photogenic Talon TALS8 Heavy-Duty Air-Cushioned Stand (8 )
EAN: 689670130158
The Photogenic Talon TALS8 Heavy-Duty Air-Cushioned Stand is a combination of design quality and practicality, achieving superior stability and longer service life even under constant, rigorous use.
Optional casters are available for added convenience.
Folds down to a size that is easy to pack into a location case.
Photogenic Ion Lithium-ion Pure Sine Wave Inverter System Specs
Power Supply
| Construction | High-impact ABS-PC |
| Waveform Type | Pure sine wave |
| Power Output | 120W Maximum continuous power USB: 5VDC, 500mA |
| Output Voltage | 240VAC +/-3%, 60Hz |
| Outlets | 2x 3-Prong 240V female sockets 1x 0.5A USB port |
| Dimensions | 7.5 x 4.4 x 3.3" (19 x 11.2 x 8.4 cm) |
| Weight | 3.5 lb (1.58 kg) including battery |
Battery
| Type | LiCox NiyMnzO2 Lithium-ion |
| Power | Volt/Amp-hour: 14.8V / 8.8Ah Watt-hours (energy): 130 Current: 30ADC Peak / 15ADC average Cutoff Voltage: 12VDC |
| Protection Circuits | Overload, over temperature, overcharge/discharge, over current, short circuit |
| Flashes per Charge | Photogenic monolights @ full power AKC160 160W/s: 2,050 with 1.3 sec. recycling AKC320 320W/s: 1,200 with 2.8 sec. recycling PL625DR 250W/s 900 with 1.8 with sec. recycling PL1250 500W/s 430 with 4.5 sec. recycling PL1250DR 500W/s 500 with 3.8 sec. recycling PL2500DR 1000W/s 360 with 7.5 sec. recycling PL500DR 500W/s 570 with 3.8 sec. recycling PL1000DR 1000W/s 300 with 5.5 sec. recycling |
| Cooling Fan | Yes |
| Dimensions | 6.0 x 4.4 x 1.8" (15.2 x 1.2 x 4.6 cm) |
| Weight | Battery only: 2.0 lb (0.9 kg) |
Charger
| Power | Input range: 100 to 265VAC, 50/60Hz Max. output: 16.8VDC / 3A Charging time: 3.0 to 4.0 hours Full charge voltage from charger: 16.8VDC |
Packaging Info
| Package Weight | 5.625 lb |
| Box Dimensions (LxWxH) | 11.55 x 9.5 x 6.05" |
Photogenic PL1250DRC 500W/s PowerLight Monolight (UV) Specs
Flash Head
| Maximum Power | 16 to 500 Ws |
| Power Control | 6 Stops in 1/10-Stop Increments |
| Guide Number | 110` / 33.5 m at 10` / 3 m, ISO 100 365` / 111.3 m at 10` / 3 m, ISO 100 (with Reflector) |
| Flash Duration | 1/1300 to 1/640 Sec |
| Recycle Time | 0.5 to 1.5 Sec |
| Flash Ready Indicator | Visual |
| Reflector | Changeable |
| Accessory Fitting Type | Photogenic |
Modeling Light
| Type | Tungsten |
| Wattage | 250 W |
Sync
| Sync Type | Optical |
| Built-In Wireless Receiver | No |
| System Connection | 1/4" Sync |
| Sync Voltage | 5 V |
Power
| AC Input Power | 105 to 125 VAC, 60 Hz |
| Current | 10 A (Operating) 15 A (Charging) 0.2 A (Idle) |
| Circuit Protection | Fuse |
| Fuse | 16 A |
General
| Display | None |
| Mount | 5/8" / 16 mm Receptacle |
| Auto Dump | Yes |
| Fan Cooled | Yes |
| Dimensions | H: 4.5 x W: 4.5 x L: 6.8" / H: 11.0 x W: 11.0 x L: 17.0 cm |
| Weight | 5.5 lb / 2.5 kg |
Packaging Info
| Package Weight | 9.4 lb |
| Box Dimensions (LxWxH) | 15.354 x 11.653 x 10.551" |
Photogenic 22" Square Softbox with Mount Ring (Silver Interior) Specs
| Item Type | 22 x 22" Softbox (Square Shape) |
| Interior Color | Silver |
| Light Compatibility | Includes Speed Ring with Photogenic Mount: For Photogenic Heads |
| Quick Open Type | No |
| Accepts Grids | Yes (Not Included) |
| Removable Front Face | Yes |
| Interior Baffle | Yes, Removable |
| Dimensions | 22 x 22" / 56 x 56 cm |
Packaging Info
| Package Weight | 3.44 lb |
| Box Dimensions (LxWxH) | 30 x 7.8 x 4.75" |
Photogenic Talon TALS8 Heavy-Duty Air-Cushioned Stand (8`) Specs
| Stand Type | 1 x General Purpose Stand |
| Maximum Working Height | 8` / 2.4 m |
| Closed Length | 29" / 73.7 cm |
Mounting
| Stand/Column Top Mount | 5/8" Stud with 1/4"-20 Male |
Features
| Accepts Second Riser | No |
| Wheels | Optional |
| Air Cushioned | Yes |
| Detachable Base | No |
| Leveling Leg | No |
| Reverse Legs | No |
General
| Number of Sections | 4 |
| Footprint Diameter | 31.5" / 80 cm |
| Finish | Silver |
| Weight | 2.3 lb / 1 kg |
Packaging Info
| Package Weight | 2.8 lb |
| Box Dimensions (LxWxH) | 26.9 x 3.8 x 3.7" |
In the Box
- Photogenic Ion Lithium-ion Pure Sine Wave Inverter Module without Battery
- Photogenic Lithium-ion Battery for ION Inverter
- Photogenic Battery Charger for ION Inverter
- Photogenic Multi-Clamp for ION Inverter
- Photogenic Strap for ION Inverter
- Photogenic ESS 250W Modeling Lamp
- Photogenic 7-1/2" High Gain Reflector for Photogenic
- Photogenic C4-15C Flashtube, UV Coated - for PL1250, PL1250DR, PL1250LH, PL300DR Monolights - Clear
- Photogenic AC Line Cord - 240V, for PL and PM Series
- Photogenic Protective Cap for Powerlight Flashtube
- Photogenic Sync Cord - Phono to Male PC, Straight - 15`
- 2-Year Manufacturer Warranty
- Mounting Plate and Speed Ring for Photogenic Heads
- Storage Bag
- 30-Day Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found
