EAN: 689670171533
The Norman D24R power supply operates with all Series 900 Commercial lampheads. It features a built-in Pocket Wizard 32 channel Radio Slave, which will allw a photographer to fire the unit without a sync cord fromthe camera to the pack.
The D24 is a compact 2400w/s power supply, making it an ideal unit for location flash photography.
The power adjusts from full to -5 stops in .1 stop increments. All power levels are visible from the bright LED readouts.
In the symmetrical mode, the circuit has two 1200 w/s channels. Each channel supports two heads, and each features a separate continuous sweep flash dimming dial.
A Slow Charge selector allows use of the pack on location where there is sub-par wiring.
Fires Without Wires
From your Pocket Wizard Transmitter or Transceiver
4 Channel Control
Each head outlet has its own on-off switch.
Flash Ready Indication
Both Audible beep and modeling lights tracking flash are switchable on or off.
Fast Flash Duration
Short flash duration of 1/1600 sec at full power. Useful for freezing motion and preventing under-exposures due to the flash being clipped off by the camera shutter.
Consistent Output
Flash output varies less than 1/20 stop even when line voltage varies up to 25V.
Fast Recycle Time
Requires only 2.6 seconds at full power.
Norman D24 Specs
Electrical
AC Input Power | 105 to 125 VAC, 60 Hz at 15 A |
Output Voltage | 6 VDC |
Watt Seconds | 2400 Ws |
General
Number of Head Outlets | 4 |
Sync Input | 1/4" / 6.35 mm |
Built-In Receiver | Yes |
Built-In Optical Receiver | Yes |
Fan | Yes |
Dimensions | 11.5 x 7.5 x 10.25" / 29.2 x 19 x 26 cm |
Weight | 18 lb / 8.2 kg |
Packaging Info
Package Weight | 24.25 lb |
Box Dimensions (LxWxH) | 16.221 x 16.063 x 12.047" |
In the Box
- Norman D24R Power Pack with Radio Slave - 2400 Watt/Seconds
- Power Cord
- Built-in Radio Slave receiver
- Phono to PC Sync Cord
- 2-Year Manufacturer Warranty
Not in the Box
- Essential
No posts found