Quantum Instruments 2-Head Flash Kit w/ Trio & T5dR Flash Heads & Turbo 3 & Turbo Blade Batteries for Canon Cameras

Quantum has put together this 2-Head Flash Kit with Trio and T5dR Flash Heads and Turbo 3 and Turbo Blade Batteries for Canon Cameras to give photographers a lightweight and portable location kit. The included T5dR flash head is a completely automated flash with many advanced user-selectable operating modes and 150Ws of power, while the Qflash Trio provides 80Ws of flash power. Both units are wirelessly controlled by your camera s TTL via the kit s CoPilot Wireless TTL Flash Controller, and power is provided by Turbo 3 and Turbo Blade rechargeable batteries.

The kit also includes a wireless receiver, two 8 air-cushioned light stands, two clamps to mount the batteries to the stands, two umbrella brackets, two 45" umbrellas, and a padded case.

Quantum Instruments Qflash Model T5D-R

The Q Flash T5D-R TTL Flash by Quantum Instruments is an updated version of the T4D model. It has full wireless TTL dedication for new digital and film cameras, with the purchase of optional, camera-specific DW series QTTL modules and receivers. The Qflash T5D has Exposure compensation in Auto and Manual Modes, Under-Over F-stop exposure indicators in Auto, a Flash Counter, visible and audible flash indicators and signal, a modeling light, and an improved reflector locking ring.

It is a completely automated flash head with many advanced user-selectable operating modes it is the perfect portable flash for any professional photographer.

Regular auto and manual flash are possible through its twin-blade sync socket. TTL flash exposures are possible when using the T5D with selected digital cameras. This unit is backward compatible with all Quantum TTL cords and adapters.

The Q Flash uses parabolic reflectors for clean, even light spread, and the reflectors are removable for bare-bulb lighting. Flash control is either Automatic, TTL (with optional adapters for TTL camera control), Manual, or Stroboscopic. Automatic exposure control covers a nine stop range, adjustable every 1/3 stop, for a total of 25 automatic settings. Manual power can be adjusted from full to 1/64 power in 1/3 stop increments flash power can be dialed in precisely Stroboscopic mode can be adjusted for flash power and number and frequency of bursts for special effects. Program allows storage of up to 8 favorite settings and switching between them at a push of a button.

The LCD control panel shows minimum & maximum flash distance range for each auto setting. It has both an audible and visual indication of correct exposure, displaying " OK" & 1 beep, or 3 beeps right away and an " UNDR" or " OVER" in the display, indicating which way to adjust the unit. The beep is switchable, or one may use the included earphone in situations where noise is distracting.

The Q Flash mounts on a camera bracket, tripod, or light stand and weighs no more than a conventional flash.

The Q Flash Model T5 can only be powered by the TURBO Series Batteries or Lumedyne Mega Cyclers with a Lumedyne battery, up to 150 Ws, full power, manual.

Wireless TTL, Sync and Shutter Control

Links Qflash 5D series flashes to digital and film cameras (Canon, Nikon, Olympus, Hasselblad, Mamiya, and Contax) - wirelessly.
QTTL Adapters with a FreeXWire FW9T Transmitter will send commands to one or more remote FreeXWire receivers connected to Qflashes.

Full Dedication

Connect a Qflash 5D to a camera using an optional Dw series QTTL adapter to make Qflash a fully dedicated flash that mimics the features of camera manufacturers flashes.

Manual Mode

Power may be adjusted from full to 1/2 to 1/64 power in 1/3 stop increments.

Stroboscopic Mode

May be adjusted for power, number, and frequency of rapid firing for special effects.

Program Mode

Store up to 8 favorite settings, switch between them at the push of a button.

Exposure Confirmation

Visual: Displays " OK"
Audible: Beeps once for OK, or beeps 3 times with an " UNDR" or " OVER" in the display, indicating which way to adjust the Q Flash.
The beeping is switchable, or can be heard discreetly with the included earphone.

Changeable Reflector

May be used with included parabolic or optional QF63 telephoto reflector.
May be used bare bulb, or with silver or gold bare bulb enhancers.

Angle Adjustment

Head swivels and tilts for bounce flash capability.

Easy to Mount

Mounts on a camera bracket, lightstand, or tripod with the 1/4" -20 threaded socket on the bottom of the unit.

New Reflector Mount

Improved for sure mounting of new " B" series reflectors and accessories.

Quantum Instruments CoPilot Wireless TTL Flash Controller for Canon

With the Quantum Instruments CoPilot Wireless TTL Flash Controller you can control a studio full of flashes from up to 300 away from the hotshoe of your Canon camera. Not only will the CoPilot trigger them but can adjust the lighting ratios of up to three independent groups of flashes. Instead of poking away at an LCD screen Quantum gives you ergonomic, tactile dials that you can adjust without looking at them once you get used to their functions. The CoPilot is compatible with current Qflash TRIOs and T5dRs as well as older versions and any non-Quantum flash that can be triggered in Manual and Auto mode only by a FreeXwire wireless receiver. Last but not least, the CoPilot has a built-in IR autofocus assist for fast focus in low light.

The CoPilot s infrared autofocus assist helps your camera focus in low light

TTL control of up to three independent groups of flashes without a local flash or two remote groups with a local Qflash connected to the accessory connector of CoPilot. Compatible with Quantum TRIO and T5dR and older T2D, T3D, T4D and T5D versions

Trigger non-Quantum flash in manual or auto mode with FreeXwire FW8R or FW10W receivers

Use any number of flashes in each remote group

Instant dial settings replace complicated LCD display

Reliable digital radio wireless up to 300 (100 m)

EAN: 807955012474

Quantum Instruments Qflash TRIO Basic Flash for Canon Cameras

The Quantum Qflash TRIO Basic Flash combines several of Quantum s venerable Qflash system technologies into one complete dedicated shoe mount flash, and has full E-TTL / E-TTL II dedication to Canon cameras. Slip it onto the camera hot-shoe, connect any Quantum Turbo battery (not included), and shoot studio-quality flash photos non-stop, 24 hours a day without slowing down or overheating.

The Qflash uses parabolic reflectors for clean, even light spread, and the reflectors are removable for bare-bulb lighting. The flash can be used either on-camera on its own or on-camera as a master to other off-camera units.

The TRIO Basic includes many of the same functions as other Qflash models including: Manual, Auto, Auto-Fill, TTL, and Program (Pre-Sets) modes. The TRIO Basic has high-speed sync capabilities, and can be powered by any Quantum heavy-duty Turbo-series battery, which allows for almost unlimited rapid-fire, full-power flashes. It has a user-replaceable flash tube, a coiled 6 power cable, a removable reflector and includes 2 flat white UV diffusers. A wide variety of op