The black Selador Desire D60 Studio Daylight Wash Luminaire with L5-20 Connector from ETC uses high-output, white light LEDs to create a suitable fixture for video, film, and other white light only applications where color temperature and skin-tone rendering are critical.
It offers a rugged die-cast enclosure, quiet, fan-cooled operation, multiple lens options, and an advanced user interface that enables easy configuration and specific features for video and film professionals.
The fixture can be configured to operate under control of a studio lighting control desk or via standalone ‘no console required’ settings for location lighting. The D60 Studio Daylight contains sixty energy-saving 5600 K LEDs for high-intensity, non-variable cool white output. It provides enhanced color rendering to the eye, particularly at higher color temperature settings such as 5600 K. This round, PAR-shaped washlight is well-suited for stage, studio, and places where brightness and color flexibility are required.
The Studio Luminaire comes with 60 powerful emitters that produce stronger light output than other LEDs. The D60 Studio Luminaire is designed for indoor broadcast, theater, or architectural uses.
All LED sources experience some lessening of light output and color shift over time. LED output varies with thermal conditions. Ambient temperatures and orientation affect thermal conditions. Based on the LED manufacturer s B50 l70 specification, a Selador luminaire will achieve approx. 70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs are used for different durations and levels, which may eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs.
60 LED variable white light wash fixture
CE compliant, ETL listed to UL1573, the standard for stage and studio lighting units
IP20-rated for indoor use
Power and DMX In / Through connections for easy setup
User-friendly control interface with multiple modes and fixture settings for console-free operation
Rugged die-cast all-metal housing
Easy access slots for secondary lenses and accessories
Uses 225mm lenses and accessories
Hanging yoke standard, yoke / floor stand sold separately
Neutrik power in and through connections
DMX512 in and thru via 5-pin XLR connectors
Up to 9 fixtures can be linked via power in/thru connectors per 15Acircuit using 1.0mm2 cables as supplied
Requires power from a non-dim source
Rebel ES white light emitters for higher output
Studio Daylight s optional red-shift option emulates tungsten dimming performance characteristics
Fixture comes with a 25° lens
Additional secondary lenses available for multiple beam spread options
Multiple control options including strobe and console-free Master / Slave mode
15-bit virtual dimming engine provides smooth, high quality theatrical fades
RDM functionality for address and setting changes
Active electronic thermal management for droop-free operation
Low-noise fan cooling
Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
Primary field angle of 17°
Native field angle of 18°
The fan in this D60 fixture is thermostatically controlled to run as needed with 60% fan speed at high intensities at room temperature
Studio profile Quick Set enables control of intensity from luminaire U/I with no console required
Linear dimming curve
Regulated output for intensity stability
The fixture uses Luxeon Rebel ES emitters specified by strict binning standards
The fixture with non-variable single-color daylight array such as Studio Daylight can use standard color correction filters (Rosco 3314, Rosco 3316 or similar) to achieve desired on-camera result
On-camera LED response varies with different cameras and settings
Daylight LEDs can appear slightly greener than other 5600 K sources on camera
Studio control mode allows fixtures to be operated with no DMX console required
Compatible with 25°, 35°, 45°, and 75° round field diffuser lenses and 20 x 40°, 30 x 70° and 35 x 80° oblong diffuser lenses (sold separately)
IP20-rated D60 for indoor use
ETC D60 Studio Specs
| Power Input | 100 to 240 VAC 50/60 Hz, universal power input |
| Power Consumption | 161 W, 0.7 A, 230 V at full intensity |
| LED Life | 50,000 hour LED life (to 70% intensity) |
| Emitter | LED: 60 Luxeon Rebel 2.5 W |
| Field Angle | Primary: 17° |
| Control | DMX512 in and through via 5-pin XLR connectors |
| Mode | Boost-Cold: Degree: 22° Candela: 189,500 Field Lumens: 7,880 Beam Lumens: 4,100 Lumens/W: 55.3 Regulated: Degree: 22° Candela: 174,800 Field Lumens: 7,290 Beam Lumens: 3,800 Lumens/W: 54.8 |
| Rating | At 5600 K CQS: 70 CRI: 71 DUV: 0.001 Color Fidelity: 69 |
| Illuminance | 20,398 lux (1,895 fc) @ 9.84` (3.00 m) throw distance & 3.94` (1.20 m) field diameter 9,066 lux @ (842 fc) @ 15.09` (4.60 m) throw distance & 5.91` (1.80 m) field diameter 5,099 lux @ (474 fc) @ 20.01` (6.10 m) throw distance & 7.87` (2.40 m) field diameter 3,264 lux @ (303 fc) @ 24.93` (7.60 m) throw distance & 9.51` (2.90 m) field diameter |
| Broadcasting System | Acoustical: Speed: 30%; Sound Pressure Level: 25.0 dBA Speed: 51%; Sound Pressure Level: 37.4 dBA Speed: 60%; Sound Pressure Level: 38.6 dBA Speed: 100%; Sound Pressure Level: 43.1 dBA |
| Operating Temperature | -4 to 104°F (-20 to 40°C) |
| Overall Dimensions (H x W x D) | 14.2 x 12.2 x 8.2" (361.0 x 309.0 x 209.0 mm) |
| Weight | 19.1 lb (8.7 kg) |
Packaging Info
| Box Dimensions (LxWxH) | 21.5 x 15 x 12.5" |
In the Box
- ETC Selador Desire D60 Studio Daylight Wash Luminaire with L5-20 Connector (Black)
- Hanging Yoke
- 25° Secondary Lens
- 1.5m PowerCON to Bare Ends Power Cable
- L5-20 Connector
- 3-Year Manufacturer Warranty
No posts found
