ETC Selador Desire D60 Vivid LED Fixture With Twistlock Connector (Black)

The D60 Vivid Luminaire also features the x7 Color System array. The x7 Color System uses seven different LED colors to achieve true, usable broad-spectrum color. The D60 Vivid luminaire blends up to 7 LED hues to provide a nearly unlimited number of color mixes.

The D60 Luminaire features a user interface with Quick Setup options to simplify work. You can choose from Stage, High-Impact, XT (Exterior) / Architectural, General, and Studio settings to customize the luminaire to your specific task. You can further tailor the fixture to your needs by choosing profile and performance settings via the user interface. The luminaire can be controlled from a DMX-enabled controller, like an ETC lighting control console, or can be run on its own by selecting the Stand Alone Mode on the unit.

The Desire D60 Vivid Luminaire pairs bright LED emitters with a vibrant color range to produce a spectrally balanced saturated light. It can be used in applications such as theatres, studios, schools, houses of worship, hotels, convention centers, theme parks, museums, temporary events, etc.

All LED sources experience some lessening of light output and color shift over time. LED output will vary with thermal conditions. Ambient temperatures and orientation affect thermal conditions. Based on the LED manufacturer s B50 l70 specification, a Selador luminaire achieves approximately 70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels, which may eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs.

IP-20 rated for indoor use

DMX512 in and thru via 5-pin XLR connectors

User-friendly control interface with multiple modes and fixture settings

Primary field angle of 17°

Full 7-color x7 LED array

Optimized for high-output deep pastels and strong saturated colors an all-around workhorse for vibrant color washes

Rugged die-cast aluminum construction

Easy-access slots for secondary lenses and standard 8.875 accessories

Advanced thermal management systems for long LED life

Ultra-quiet cooling fan for use in high ambient temperature situations the fan is thermostatically controlled to run as needed

Neutrik power in and thru connections

Up to nine D60 fixtures (15Amaximum) can be linked via the power thru connector

Requires power from a non-dim source

Achieves 3200 K or any other Correlated Color Temperature white light from 2,000 to 10,000 K

Beautifully illuminates skin tones and other objects for natural appearance and high color rendering

Red-shift option emulates tungsten dimming performance

Deeply saturated colors across a wide gamut

DMX-based fan control for predictable noise levels

Multiple control options including RGB, strobe, and console-free master/slave mode

15-bit virtual dimming engine for smooth, high-quality theatrical fades and minimizes color shift during dimming