Kaiser RSD Copy Stand (Non-Motorized)
The column of the non-motorized RSD Copy Stand from Kaiser is constructed from matt black, anodized aluminum with multi-section tubing and features inch/cm scales. The camera carrier is also constructed from aluminum. This camera carrier can be horizontally adjusted up to approximately 6.3 ? (16cm) with rack-and-pinion parallel guides.
The RSD Copy Stand offers both left and right hand operations using 2 blocking screws that prevent inadvertent changes to the adjusted position. The camera mounting plate can be tilted by an angle of A±90° and the camera connecting screw is horizontally adjustable. The height adjustment of the camera plate is available with a hand crank.
The copy stand also features a large, non-reflecting matt gray base plate with printed grid and inch/cm scales. Additional features of the stand include height adjustments of the base feet and a spirit level for indicating the proper alignment of an attached camera.
It is recommended to use the RB 5070 DX lighting systems and R1 system copy lighting units for this RD system copy stand.
Hand-cranked, rack-and-pinion height adjustment
Counter-balanced by a built-in coil spring
Blocking screw to stop accidental height changes
The column of the non-motorized RSD Copy Stand from Kaiser is constructed from matt black, anodized aluminum with multi-section tubing and features inch/cm scales. The camera carrier is also constructed from aluminum. This camera carrier can be horizontally adjusted up to approximately 6.3 ? (16cm) with rack-and-pinion parallel guides.
The RSD Copy Stand offers both left and right hand operations using 2 blocking screws that prevent inadvertent changes to the adjusted position. The camera mounting plate can be tilted by an angle of A±90° and the camera connecting screw is horizontally adjustable. The height adjustment of the camera plate is available with a hand crank.
The copy stand also features a large, non-reflecting matt gray base plate with printed grid and inch/cm scales. Additional features of the stand include height adjustments of the base feet and a spirit level for indicating the proper alignment of an attached camera.
It is recommended to use the RB 5070 DX lighting systems and R1 system copy lighting units for this RD system copy stand.
Hand-cranked, rack-and-pinion height adjustment
Counter-balanced by a built-in coil spring
Blocking screw to stop accidental height changes
Kaiser 205602 Specs
Stand
| Baseboard Size | 26.8 x 22.4 x 1.5" / 68 x 57 x 3.8 cm |
| Height | 46.8" / 118.87 cm (Column Height) |
| Camera Mount | Reversible 1/4"-20 Male & 3/8"-16 Male |
| Load Capacity | Camera: 17.6 lb / 8 kg |
Packaging Info
| Package Weight | 58.1 lb |
| Box Dimensions (LxWxH) | 49 x 25 x 24" |
In the Box
- Kaiser RSD Copy Stand (Non-Motorized)
No posts found
