Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Burris Optics XTR Signature Rings (34mm, Aluminum, Low, Matte Black)
EAN: 000381202109
Adjust the canting of your scope using the low Burris Optics XTR Signature Rings for Riflescopes. These rings accept 34mm maintubes, fit Picatinny/Weaver bases and rails, and hold the center of the scope 1 above the top of a rail or base. To assist you with canting, the rings include five pairs of Pos-Align inserts for 5, 10, 15, 20, 25, 30, and 40 MOA corrections. The inserts also help with centering and maximum scope-to-ring contact to increase gripping power without scratching your scope s finish. The rings can also be used to correct misalignment caused by off-center receiver holes or bases. The dual steel clamps with a full cross-through connection assure proper centering on Picatinny rails and add extra strength to the assembly.
EAN: 000381202109
Adjust the canting of your scope using the low Burris Optics XTR Signature Rings for Riflescopes. These rings accept 34mm maintubes, fit Picatinny/Weaver bases and rails, and hold the center of the scope 1 above the top of a rail or base. To assist you with canting, the rings include five pairs of Pos-Align inserts for 5, 10, 15, 20, 25, 30, and 40 MOA corrections. The inserts also help with centering and maximum scope-to-ring contact to increase gripping power without scratching your scope s finish. The rings can also be used to correct misalignment caused by off-center receiver holes or bases. The dual steel clamps with a full cross-through connection assure proper centering on Picatinny rails and add extra strength to the assembly.
- For 34mm maintubes
- Self-centering dual steel clamps assure proper centering on Picatinny/Weaver rails
- Pos-Align inserts
- Allow for centering
- Provide solid scope-to-ring holding power
- Doesn t scratch scope s finish
- Five pairs of inserts included for a maximum of 40 MOA adjustment:
- 2 x A±0 MOA inserts
- 2 x A±5 MOA inserts
- 2 x A±10 MOA inserts
- 4 x A±20 MOA inserts
- The inserts allow making 5, 10, 15, 20, 25, 30, and 40 MOA corrections
- Allow sighting without disturbing your scope s adjustments
- Correct misalignment caused by off-center receiver holes and bases
- Eliminate a need for tapered bases or shimming for long distance shooting
- Aluminum construction with dual steel clamps
No posts found
