Steiner DBAL-A3 class 1/3R Civilian Visible Green/IR Laser Sight with IR Illuminator (Black)

Steiner DBAL-A3 class 1/3R Civilian Visible Green/IR Laser Sight with IR Illuminator (Black)

EAN: 000381890085

Now available for the commercial market, the DBAL-A3 class 1/3R Civilian Visible Green/IR Laser Sight with IR Illuminator from Steiner Optics is a durable yet compact multifunction laser aiming device that incorporates a green aiming laser, an IR aiming laser, and an infrared LED illuminator. The Dual Beam Aiming Laser (DBAL) features independently adjustable lasers that allow the operator to choose the output mode and correct the impact point of each laser. A powerful IR LED provides an independent illuminator. This configuration of the DBAL is outfitted with a green aiming laser that is visible without NVDs up to 50 away during the day and 820 yards at night. For covert operation and use with NVDs, the DBAL has an 835nm IR laser that can be seen out to 275 yards, day or night. The IR illuminator enables target designation or allows users to flood the night vision scene with infrared light owing to its adjustable beam angle from a tight 2° spot to a wide 30° flood. This entire laser/illuminator system runs on a single included CR123A battery.

The DBAL-A3 features an integrated activation pushbutton switch with an included remote activation pressure pad. The remote switch allows the operator to activate the DBAL while remaining in the firing position. Simply tap either switch once for momentary activation, or double-tap for five continuous minutes. A mode selector switch at the rear of the housing enables the operator to set the power output that suits their targeting task. Independent windage and elevation dials enable users to zero and perform shot correction for the green and IR lasers. The DBAL-A3 is made of the lightweight and durable 6061-T6 aluminum alloy with a matte black corrosion- and scratch-resistant Type III hard anodized finish. This rugged housing is ESD compliant for air worthiness, and it meets MIL-STD 810G standards for extreme temperature tolerance and waterproofing.

Export of this device described herein is strictly prohibited without a valid export license issued by the U.S. Department of State office of Defense Trade Controls, as prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulation, Parts 120-130, and/or the U.S. Department of Commerce. For further information contact the Office of Defense Trade Control and/or the U.S. Department of Commerce.

Visible Laser Performance

• Class IIIa green
• Peak wavelength: 532nm
• Output power: <5mW
• Beam divergence: <0.8 mRad
• Visible range, day: 50 feet
• Visible range, night: 820 yards

IR Laser

• Class IIIb eye-safe IR
• Peak wavelength: 835nm
• Output power: <0.7mW
• Beam divergence: <0.8 mRad
• 275-yard maximuosible range, day or night

Illuminator Performance

• Eye safe IR LEDs
• Peak wavelength: 835nm
• Output power: <600mW
• Adjustable beam angle from 2° spot to 30° flood
• 1100 -yard maximuosible range, day or night

Use and Handling

• Separate windage and elevation adjustment dials for the green and IR lasers
• Finger-adjustable impact point correction
• High and low visible/IR laser and illuminator outputs
• Double Tap activation switch: Single tap momentary use, double-tap 5 continuous minutes activation
• Shrouded activation button, windage, elevation, and output dials
• Rear-facing activation and low-battery indicators

Construction Details

• 6061T-6 aluminum alloy housing
• Scratch- and corrosion-resistant black Type III hard coat finish anodized
• Broad -40 to 149°F operating temperature range
• Watertight to 16 feet
• 3.5 x 2.8 footprint
• Tethered battery cover, laser/LED emitter windows
• 8 oz weight
• Runs on one included CR123A battery
• Predrilled mounting holes for top rail mount or reflex sight