MAK MAKdot SH Red Dot Sight and P-Lock Mount Bundle

MAK MAKdot SH Overview

With this MAKdot SH Red Dot Sight and P-Lock Mount Bundle from MAK, you can add an optic to your sidearm for better target acquisition in seconds. The MAKdot SH employs a robust 3.5 MOA red dot for confident targeting with both eyes open. The P-Lock Mount attaches to your under-barrel rail and holds the reflex sight above the slide, keeping the dot on the target while you're firing multiple rounds. This version of the P-Lock fits Glock Gen4 17, 19, 22, 31, 34, and 35 models.

MAK MAKdot SH Red Dot Sight (3.5 MOA Dot)

The MAKdot SH Red Dot Sight allows fast, both-eyes-open targeting with full situational awareness. Its large 3.5 MOA red dot makes for confident targeting, and offers eight brightness settings for good visibility in any lighting condition. The dot reticle adjusts for elevation and windage at 1 MOA per click. Auto shutoff after four hours conserves power from the CR2032 battery-which, conveniently, can be replaced without having to remove the sight from your weapon. The MAKdot SH is waterproof down to 3.3' and built to MIL-STD-810 standards. It fits the Aimpoint Micro T-2 footprint.

Optical Performance

• Fast, both-eyes-open target acquisition
• 80% light transmission
• 1x magnification
• Unlimited eye relief

Use and Handling

• 1 MOA per click windage and elevation adjustments
• Eight brightness settings
• Auto shutoff after four hours of inactivity

Construction

• 6360 aluminum housing
• Waterproof to 3.3' for 30 minutes
• Powered by one CR2032 battery
• Compatible with Aimpoint Micro T-2 footprint

MAK P-Lock Reflex Sight Snap-On Mount for Glock Gen4 17, 19, 22, 31, 34, 35

The P-Lock Reflex Sight Snap-On Mount for Glock Gen4 17, 19, 22, 31, 34, 35 lets you snap on a MAK MAKdot SH, Fastfire 2/3, Venom, or Viper reflex sight in seconds, with no tools needed. The P-Lock attaches to the pistol's under-barrel rail and holds the reflex sight above the slide, so the dot stays on the target and the iron sights are visible at all times. Machined in Germany from solid 7570 T6 aluminum, the mount is unaffected by recoil and meets MIL-STD-801 environmental standards.

• Fits Glock Gen4 17, 19, 22, 31, 34, 35
• For use with MAK MAKdot SH, Fastfire 2/3, Venom, or Viper reflex sight
• Mount attaches to under-barrel rail
• Reflex sight snaps on in seconds, no tools needed
• Mount holds sight above slide and iron sights remain visible
• Machined from 7570 T6 aluminum