Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Dolgin Engineering TC400-DSLR-C Four Position Battery Charger with TDM for Canon LP-E6 Series Batteries
The Dolgin Engineering TC400-DSLR-C Four Position Battery Charger with TDM simultaneously charges four Canon LP-E6 series battery packs. It will charge batteries in approximately 2.5 hours when all four channels are filled. Additionally, each battery bay is independent, meaning that batteries can be added and removed at any time.
The TC400 features a Test Discharge Module, which puts each battery through a cycle of charging, discharging, and recharging to determine its true capacity. An LCD monitor displays the status, voltage, capacity, and charge percentage of each battery. This charger runs on 100-240 VAC power, enabling use all over the world.
Compatibility
Pelican 1450 Case with Foam (Black)
EAN: 019428010805
The Pelican 1450 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25 (6.4 mm) neoprene o-ring, easy-open double throw latches that seal perfectly, and an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has a comfortable rubber over-molded handle.
Three-piece foam set that consists of 1 egg crate foam upper section, 1 Pick N Pluck foam section and one 1.0 blank bottom foam section
Automatic pressure equalization valve
0.25 (6.4mm) neoprene o-ring
Easy-open double throw latches with stainless steel padlock protectors
Temperature rating -40 to +210° F (-40 to +95° C)
Comfortable rubber over-molded handle
Certifications
The Dolgin Engineering TC400-DSLR-C Four Position Battery Charger with TDM simultaneously charges four Canon LP-E6 series battery packs. It will charge batteries in approximately 2.5 hours when all four channels are filled. Additionally, each battery bay is independent, meaning that batteries can be added and removed at any time.
The TC400 features a Test Discharge Module, which puts each battery through a cycle of charging, discharging, and recharging to determine its true capacity. An LCD monitor displays the status, voltage, capacity, and charge percentage of each battery. This charger runs on 100-240 VAC power, enabling use all over the world.
Compatibility
- LP-E6
- LP-E6N
- LP-E6NH
Pelican 1450 Case with Foam (Black)
EAN: 019428010805
The Pelican 1450 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25 (6.4 mm) neoprene o-ring, easy-open double throw latches that seal perfectly, and an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has a comfortable rubber over-molded handle.
This case includes a 3-piece foam set.
Construction
- Ultra High Impact structural copolymer
- Watertight, crushproof, and dustproof
- Foam interior
- Open cell core with solid wall design
- Stainless steel hardware
Three-piece foam set that consists of 1 egg crate foam upper section, 1 Pick N Pluck foam section and one 1.0 blank bottom foam section
Automatic pressure equalization valve
0.25 (6.4mm) neoprene o-ring
Easy-open double throw latches with stainless steel padlock protectors
Temperature rating -40 to +210° F (-40 to +95° C)
Comfortable rubber over-molded handle
Certifications
- IP67 (Ingress Protection) = 1 meter submersion or 30 minutes
- MIL C-4150J (Military Standard)
- Defense standard 81-41/STANAG4280
Dolgin Engineering TC400-DSLR-C Four Position Battery Charger with TDM for Canon LP-E6 Series Batteries Specs
Battery Charger
| Compatibility | Canon LP-E6/E6N |
| Number of Battery Bays | 4 |
| Multi-Bay Charging Modes | Independent, Simultaneous |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Indicator | LCD Display, Test Discharge Module |
| Dimensions | 8.4 x 6.6 x 2.5" / 21.3 x 16.8 x 6.3 cm |
| Weight | 80 oz / 2268 g |
Packaging Info
| Package Weight | 3.65 lb |
| Box Dimensions (LxWxH) | 11.75 x 9.25 x 4.2" |
Pelican 1450 Case with Foam (Black) Specs
| Carry/Transport Options | Handle |
| Color | Black |
| Type of Closure | Latch |
| Interior Type | Cubed Foam |
| Security Lock | Accepts Padlock |
Environmental
| Water Resistance | Waterproof |
| Maximum Buoyancy | 30 lb / 13.6 kg |
General
| Materials | Exterior: Polypropylene |
| Dimensions | Exterior 16 x 13 x 6.9" / 40.6 x 33 x 17.5 cm Interior 14.6 x 10.2 x 6" / 37.1 x 25.9 x 15.2 cm |
| Weight | 6.4 lb / 2.9 kg |
Packaging Info
| Package Weight | 7.7 lb |
| Box Dimensions (LxWxH) | 16.7 x 12.6 x 7.55" |
In the Box
- 2-Year Manufacturer Warranty
- Pelican 1453 O-Ring - for Pelican 1450 Series Cases (Replacement)
- Pelican 1451 3 Piece Foam Set - for Pelican 1450 Case (Replacement)
- Unconditional Lifetime Guarantee of Excellence
No posts found
