Bolt VB-22 Bare-Bulb Flash and Accessory Kit

Pairing a versatile and unique bare bulb flash with a broad array of light modifiers and power supplies, the Bolt VB-22 Bare-Bulb Flash and Accessory Kit from includes the on-camera strobe, power pack, extra battery, a host of light modifiers, a radio transmitter and receiver, and extension, doubler, and splitter cables.

The VB-22 s bare-bulb design produces a quality of light similar to studio strobes with the added advantage of being a compact, shoe-mounted light. It has an output of 360Ws, a guide number of 262 at ISO 100, and covers lenses as wide as 28mm. The locking head design can be tilted from -15 to +90° and rotated 135° left or 180° right for greater control over positioning. Fully manual operation avails power settings from 1/1 to 1/128 and when attached to the included PP-500DR Dual Outlet Power Pack very fast recycling to full power in 1 second is possible!

The included pack s dual outlet design permits powering up to two heads at the same time, and depending on the configuration, up to 2700 flashes per charge are possible. The pack includes a removable 5800 mAh battery. Also offering versatile power options, this kit includes a 15 extension cable for a long working range between the flash and battery a PP-DC Doubler Cable to help cut recycle times in half by using both outlets of the pack to power the single flash and a PP-SC Splitter Cable to permit powering two separate flashes from a single outlet of the pack. Additionally, this kit also includes the dedicated Bolt 16-channel radio transmitter and receiver kit to permit wireless triggering of the flash.

For greater control over the bare bulb flash s appearance, a series of lighting modifiers are included for fine-tuning the output of the light. A clip-on 50° grid narrows the light beam and increases the contrast and hardness of the light, and red, yellow, blue, and green colored filters can be used for creative effects. The 12" beauty dish produces a soft, yet crisp light quality and also includes a 40° grid for more control. The snoot set includes both cone and tube snoots, and both feature built-in 40° grids for tight, pinpoint lighting. Additionally, the umbrella mounting kit also enables the attachment of optional umbrellas up to 45" and includes a wide-angle reflector for a broad quality of light.

Bolt VB-22 Bare-Bulb Flash

Featuring a bare-bulb design and an output of 360Ws, the Bolt VB-22 Bare-Bulb Flash is a specialized shoe-mount flash unit that offers users a quality of light similar to studio strobes in a compact, portable package. The bare bulb design provides a full 360° specular light and is able to work with a variety of optional light modifiers, such as an umbrella mount, colored filters, and grids for creating distinct lighting effects.

The unit features a powerful guide number of 262 at ISO 100 and covers about 28mm when used with the included reflector. The flash can also be used as an optical slave at a range of up to 33 . This mode has two settings to control whether to trigger the flash immediately when the master is fired or to ignore a single preflash.

The VB-22 flash also features a stroboscopic, or repeat, mode that allows the unit to fire multiple flashes in a row, meaning users can capture multiple images of a subject in a single exposure. The locking head can rotate 135° right and 180° left as well as tilt from -15 to 90° for added control and versatility. Additionally, the unit is fully manual and offers power settings from 1/1 to 1/128. The flash does require power from an optional external power pack which will provide a recycle time of approximately 0.1 to 5.2 seconds. It comes with a retaining ring, diffuser, reflector, power cable, protective pouch, a stand/tripod mount, a stand mounting foot, and a shoe mounting foot.

Interchangeable shoe and stand mounts that allow more secure attachment to either a light stand, tripod, or shoe

Manual AF-assist light for focusing in low-light situations

1.75" backlit LCD display

Power settings from 1/1 to 1/128 in 1/3 EV steps

Flash duration of 1/300 to 1/10,000 second

Can accept multiple accessories to adjust light quality

Can be triggered via hot shoe, PC sync cord, 3.5mm cable, as an optical slave, or with a dedicated remote control

EAN: 847628577268

Bolt PP-500DR Dual-Outlet Power Pack with Removable Battery

The PP-500DR Dual-Outlet Power Pack with Removable Battery from Bolt is an interchangeable battery system that is compatible with most on-camera flashes such as Nikon, Canon, Sony, Bolt, Sunpak, Vivitar, Metz, and other popular flashes. The dual outlets on the pack enable you to use two on-camera flashes at the same time, and the outlets have locking connectors to secure the power cables and prevent them from falling out. The portable lithium-ion battery is rechargeable via the included AC adapter, which takes approximately 4.5 hours to fully charge.

At full capacity, the battery supplies up to 2700 flashes at full power while you keep watch of the battery s life through the meter display. The battery recycles between flashes as fast as one second, so you never miss a shot. A 1A USB charging port is supplied to charge other small electronic devices like a smartphone. A belt clip and shoulder strap are also included, which gives you plenty of carrying options.

Flash Compatibility

Nikon, Canon, Sony, Bolt, Sunpak, Vivitar, Metz, and flashes with HV port.

Battery Compatibility

Bolt PP-5800BP and Bolt PP-400BP battery packs.

Portable Power

The battery provides up to 2700 flashes at full power.

Dual Outlets

The portable battery provides two outlets to connect two on-camera flashes at the same time.

Recycling Times

The PP-500DR provides fast recycle times as short as one second.

Interchangeable Battery System

Switch out your battery pack and continue shooting when you run out of power with the Cyclone DR PP-500DR Power Pack.

Rechargeable

With the included AC adapter, the battery recharges in approximately 4.5 hours.

USB Charging Port

Charge other small electronic devices like a smartphone through the built-in USB charging port that provides 1A of output power.

Battery Meter Display

Keep track of the power pack s battery life via the meter display.

EAN: 847628013681

Bolt Grid and Filter Kit for VB-Series Bare-Bulb Flashes

The Bolt Grid and Filter Kit is designed for use with the VB-series bare-bulb flash units and comes with a 50° grid for limiting light spill and increasing contrast as well as red, yellow, blue, and green filters for creating accent lighting. These accessories easily mount the flash s reflector and use the retaining ring to remain secured in place. The filters can be stacked for creating different effects.

EAN: 847628577152

Bolt PP-DC Doubler Cable for Power Packs

The Bolt PP-DC Doubler Cable allows you to plug one power cord into two 4-pin DIN HV power pack outlets. This will cut recycle time in half and ensure that the flash is ready to fire when you need it.

Repeated high-power flashes may raise the temperature of the flash or battery unit due to the high-speed recycling. Use caution to avoid overheating and allow your flash unit to cool down periodically.

Compatible Power Packs

Bolt Cyclone DR PP-400DR Dual Outlet Power Pack

EAN: 847628577213

Bolt PP-SC Splitter Cable for Power Packs

The Bolt PP-SC Splitter Cable allows you to power two flashes from one 4-pin DIN HV power pack socket, such as those found on the Bolt Cyclone PP-400DR.

Compatible Power Packs

Bolt Cyclone PP-310 Compact Power Pack
Bolt Cyclone DR PP-400DR Dual Outlet Power Pack
Bolt Cyclone X PP-600 Compact Power Pack
Any power pack that utilizes a 4-pin DIN HV port