Bolt VS-570F Wireless TTL Flash for Fujifilm Cameras

Create light around your subject or augment existing light with the VS-570F Wireless TTL Flash from Bolt. Available here to be fully compatible with Fujifilm s TTL, including use as a wireless slave flash, the VS-570F allows photographers to work quickly and comfortably by knowing that settings can be easily determined with the camera s automatic metering system. This unit also has good power output with a guide number of 141 at ISO 100 and 50mm and can cover a range of focal lengths from 24-105mm using the zoom head, or as wide as 18mm with the pull-out diffusion panel. You can even control output manually with power settings from 1/1 to 1/64.

In addition to on-camera TTL, the VS-570F can be set up as a simple optical slave. Multiple sync modes are available for complete control over your images, including high-speed sync and both 1st and 2nd curtain sync settings. The flash also has a recycle time of 0.5-9 seconds and can run on either 4 AA batteries or an external power pack, thanks to the inclusion of an HV power port. Additionally, for basic off-camera use it has a standard PC sync terminal.

Compatible with Fujifilm TTL

Guide number of 141 at ISO 100 and 50mm position

Zoom head offers coverage of 24-105mm on full-frame sensors with the ability to cover 18mm when the pull-out diffusion panel is used

Manual power control from 1/1 to 1/64

Tilts upward 90° and rotates right 120° and left 180°

Built-in reflector panel can bounce some light forward when the flash is tilted to fill in shadows and create catchlights

1.8" backlit LCD screen

AF assist light for working in dim lighting conditions

The flash can be set up as a wireless slave TTL flash unit

In addition to use as an optical slave the VS-570F can be set up as a slave TTL unit for Canon and Nikon systems

Wireless transmission for manual master and slave modes uses an optical pulse method with 33 range

Access to 4 wireless channels and

Optical slave timing modes include instant sync, skip one pre-flash, and skip two pre-flashes

Flash duration of 1/1000 to 1/20,000 second

High-speed, 1st & 2nd curtain synchronization options

PC sync terminal for wired connection to your camera

Recycle time of 0.5-9 seconds with NiMH AA batteries

Runs on four AA lithium, NiMH, or alkaline batteries or an external power pack via the HV power port

Port for updating firmware

EAN: 847628586574