Phottix Mitros+ Portable Portrait 1 Kit for Canon

Phottix Mitros+ Overview

The Mitros+ Portrait Anywhere 1 Kit for Canon was put together by Phottix to expand the TTL capabilities of the Mitros+ flash by using it off-camera. The kit contains a Mitros+ TTL Transceiver Flash for Canon, a flash shoe umbrella holder, 9 light stand and a 40" white translucent shoot-through umbrella. Complete the package and gain wireless TTL exposure at distances up to 328 by purchasing an optional Odin II Trigger Transmitter for Canon

Phottix Mitros+ TTL Transceiver Flash for Canon Cameras

The Phottix Mitros+ TTL Transceiver Flash features a built-in Odin transmitter and receiver as well as full E-TTL / E-TTL II functionality for use with Canon cameras. The Mitros+ has a guide number of 190 at ISO 100 in the 105mm position, useful for illuminating subjects within a zoom range of 24 to 105mm. Additionally, the flash features wireless transmission via an optical pulse or IR triggering and can access 4 channels and 3 groups.

This radio transmission and reception is compatible with Strato II transmitters in addition to full compatibility with the Odin-series wireless devices. Also, this Mitros+ has memory functions for saving up to three sets of flash and function information for quickly changing when needed.

The flash head has the ability to rotate 180° in each direction and tilt from -7° to +90° . This allows for excellent control over bounce angles during a shoot. Also, the Mitros+ features a recycle time from 0.1 to 5 seconds that can be improved to 2.5 seconds with a quick flash mode.

Additionally, this flash unit features full manual controls and customizable shooting options that include high-speed sync and stroboscopic shooting modes. The flash runs on 4 AA batteries and comes with an attachable diffuser for softening light when needed. Other accessories include a soft case, 3.5mm sync cable, USB cable, USB drive with manual, an adapter for external power packs, and a flash stand.

Radio transmission is compatible with Odin and Strato II wireless triggering systems up to 328 away

Wireless functionality via optical pulses in 4 channels and 3 groups with a range of up to 52.5 indoors

Ratio modes from 1:8 to 1:1 and 8:1 are available for firing multiple flash units

A modeling flash setting is available for previewing how your shot will turn out

High-speed synchronization allows you to fire using the fastest shutter speed available on your camera

A bounce card and wide-angle diffuser are built into the flash head for convenience

Stroboscopic mode fires a series of flashes at a frequency of 1-199 Hz for up to 100 flashes

Status LED lights will notify you when the flash is ready to fire

Overheating protection will slow the firing time to avoid damage from heat

AF-assist light for focusing in poor lighting conditions

Memory system for retaining your settings when the flash is powered off

3.5mm sync port for connecting this flash to a larger system

USB port for installing firmware updates

Phottix Varos Pro S Multi-Function Flash Shoe Umbrella Holder

The Varos Pro S Multi-Function Flash Shoe Umbrella Holder from Phottix is 300% stronger than previous versions and features an aluminum alloy body with a metal cold shoe as well as a 3/8" and 1/4" female threaded insert and a male insert with 3/8" and 1/4" screws. The holder s teardrop-shaped umbrella mount accepts shafts from 7 to 10 mm in diameter and is slanted 8 degrees to allow more light to hit the center of the umbrella. Its patented 180-degree tilting mechanism will support up to 55 lb (25 kg). The Varos Pro S has a hanging hole with a clip for use with a counterweight or other accessory.

Benefits

• Aluminum alloy body with a metal cold shoe
• 3/8" and 1/4" female threaded insert and 3/8" and 1/4" male screws insert
• Teardrop-shaped umbrella mount which accepts umbrella s with 7-10 mm shafts
• 8-degree slanted umbrella mount that allows more light to hit the center of the umbrella.
• Redesigned patented locking mechanism to hold the top screw and bottom 3/8" and 1/4" female threaded insert securely with 300% more locking force, while keeping the umbrella shaft more secure and damage free
• Patented 180-degree tilting mechanism that will support up to 55 lb (25 kg)
• Locking features to hold bottom lugs secure until locking button is released
• Hanging hole with clip for use with a counterweight or other accessory

Phottix Air Cushioned Light Stand for Studio Flash or Light (9 )

The Air Cushioned Light Stand from Phottix is designed for use with a studio flash or studio light. It can be extended up to 110" and can support up to 6.6 lb.

Phottix Para-Pro Shoot Through Umbrella (40" )

Soften the light emitted from your strobes or speedlights with this 40" Para-Pro Shoot-Through Umbrella from Phottix . This shoot-through umbrella features white fibreglass spokes for cleaner reflections and catchlights on your subject. The umbrella can be used as a shoot-through acting much like a softbox would, or it can be used to bounce light on your subject.