This versatile M10-II Enthusiast Filter Kit from Haida includes a selection of filters that can be used individually or in various combinations to improve the results of landscape and scenic photography. The included neutral density and graduated neutral density filters allow customizing exposure density for finer control over shutter speed and depth of field. It also incorporates a rotating circular polarizer to prevent distracting reflections or glare.
Haida M10-II Filter Holder
The M10-II Filter Holder from Haida attaches to the front of your lens using an optional adapter ring. The M10-II is compatible with the adapter rings of the predecessor M10 filter holder. Attached to your lens, the M10-II supports up to three 100mm wide, 2mm thick rectangular filters and a single M10-II drop-in filter, such as the dedicated M10-II CPL, sold separately.
The second generation of Haida s M10 100mm filter holder, the M10-II is upgraded with a nonslip design that allows for easier handling in most weather conditions. It also has a new locking design for quicker attachment to adapter rings. New filter guides snap into place rather than requiring screws to be used as in the predecessor version. Also, a new locking knob will keep the holder in place after it has been rotated.
Haida M10-II Drop-In Circular Polarizer Filter for Haida M10-II Filter Holder
This Haida M10-II Drop-In Circular Polarizer Filter helps to reduce reflections and glare by filtering out light that has become polarized. The M10-II version comes with an upgraded aluminum frame that is made specifically to fit between a separately available Haida M10-II Filter Holder and an adapter ring. The improved aluminum alloy frame enables the filter to be closer to the filter holder resulting in better protection. Constructed from optical glass, this circular polarizer filter provides clarity, color fidelity, and independent rotation in order to adjust the intensity of its effect.
Polarized Light
A polarizing filter arranges, and filters, directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of this light. The result is a noticeable reduction of glare and reflections from non-metallic surfaces. This circular filter clears up haze in distant landscapes and increases tonal saturation. Additionally, it allows strongest effect when used at a 90° angle from the sun. It is ideal for use with digital cameras and autofocus lenses where a linear polarizer will often disrupt auto exposure and focus features.
Anti-Reflection Coatings
To prevent internal ghosting and reflections, each glass surface includes 10 layers of anti-reflection coatings, which also offer greater protection to the filter. The Nano coating provides an additional layer that results in an improved beading effect when the surface comes in contact with water or oil, allowing for more efficient cleaning.
Haida 100 x 100mm Red Diamond ND 1.8 Filter (6-Stop)
The Haida 100 x 100mm Red Diamond ND 1.8 Filter is an ND filter with a 64x filter factor that provides a 6-stop exposure reduction. It is compatible with the Haida 100 or 100-Pro Filter Holder, and its 1.8 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By increasing your aperture or slowing your exposure time, you can control depth of field and convey movement more easily. Neutral density filters do not affect the coloration of the image and are ideal for pairing with other filters.
Haida Red Diamond filters are constructed from shock-resistant optical glass. To prevent internal ghosting and reflections, while further enhancing clarity and color fidelity, each glass surface includes 10 layers of anti-reflective nano coatings. An additional 10 scratch-resistant hydrophobic coatings further protect a Haida Red Diamond filter s substrate and result in an improved beading effect when its surfaces come in contact with water or oil, allowing for more efficient cleaning. Additionally, Haida Red Diamond filters feature rounded edges for easier placement within a compatible filter holder slot.
A metallic case for storage and transport is included, as well as a light-blocking gasket. This gasket forms a seal that is intended to prevent stray light, which could have unwanted effects on exposure, from coming in between the filter and the lens behind it.
Compatible with Haida 100 or 100-Pro Filter Holder
1.8 neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required
Providing a 6-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily
Filter does not affect coloration of the image and is ideal for use with other filters
Shock-resistant optical glass construction
10 layers of anti-reflective nano coatings on each glass surface prevent internal ghosting and reflections, while further enhancing clarity and color fidelity
10 additional scratch-resistant hydrophobic coatings on each glass surface further protect the filter substrate and result in an improved beading effect when in contact with water or oil for greater cleaning efficiency
Rounded edges for easier placement within a compatible filter holder slot
When combined with a compatible filter holder, included gasket helps to prevent light from coming in between the filter and the lens behind it, which can have an unwanted effect on exposure
Metallic filter case for storage and transport
Haida 100 x 150mm Red Diamond Soft-Edge Graduated Neutral Density 0.9 Filter (3-Stop)
This 100 x 150mm Red Diamond Soft-Edge Graduated Neutral Density 0.9 Filter from Haida is compatible with a Haida 100 or 100-Pro Filter Holder. It helps to darken specific areas of an image, such as bright skies, while allowing for a normal, unaffected exposure in the other regions of the image. The filter is densest at the edge and tapers to clear by the middle, with a soft-edged line of transition between the dense and clear areas. A neutral density filter with a soft-edged line of transition is able to filter the sky while minimizing its effect on the land. It is particularly useful where the transition between sky and foreground is indeterminate, such as images featuring mist, fog, or the tops of trees. Neutral density filters do not affect the coloration of the image and this filter provides up to a 3-stop reduction in light from entering a lens.
Haida Red Diamond filters are constructed from shock-resistant optical glass. To prevent internal ghosting and reflections, while further enhancing clarity and color fidelity, each glass surface includes 10 layers of anti-reflective nano coatings. An additional 10 scratch-resistant hydrophobic coatings further protect a Haida Red Diamond filter s substrate and result in an improved beading effect when its surfaces come in contact with water or oil, allowing for more efficient cleaning. Additionally, Haida Red Diamond filters feature rounded edges for easier placement within a compatible filter holder slot.
A metallic case for storage and transport is included, as well as a light-blocking gasket. This gasket forms a seal that is intended to prevent stray light, which could have unwanted effects on exposure, from coming in between the filter and the lens behind it.
- Compatible with a Haida 100 or 100-Pro Filter Holder
- Darkens bright areas of an image, such as skies, while leaving the remainder of the frame unaffected
- Provides up to a 3-stop reduction of light in selective areas
- Soft-edged line of transition between the dense and clear areas
- Useful for images where the transition between sky and foreground is indeterminate, such as images featuring mist, fog, or the tops of trees
- Filter does not affect the overall coloration of the image
- Shock-resistant
Haida M10-II Drop-In Circular Polarizer Filter for Haida M10-II Filter Holder Specs
Filter Type | Circular Polarizer |
Filter Factor | 2.8x (1.5-Stop) to 4x (2-Stop) |
Circular Size | Not Specified by Manufacturer |
Rotating | Yes |
Filter Holder System Compatibility | Haida M10 II |
Coatings | Multi-Coating |
Filter Material | Glass |
Ring Material | Aluminum |
Packaging Info
Package Weight | 0.3 lb |
Box Dimensions (LxWxH) | 5.9 x 5.6 x 1" |
Haida 100 x 100mm Red Diamond ND 1.8 Filter (6-Stop) Specs
Filter Type | Solid ND |
Density | 1.8 (6-Stop) |
Rectangular Size | 3.9 x 3.9" / 100 x 100 mm |
Coatings | Multi-Coating |
Filter Thickness | 0.08" / 2 mm |
Filter Material | Glass |
Packaging Info
Package Weight | 0.355 lb |
Box Dimensions (LxWxH) | 5.2 x 5.1 x 0.8" |
Haida 100 x 150mm Red Diamond Soft-Edge Graduated Neutral Density 0.9 Filter (3-Stop) Specs
Filter Type | Graduated ND |
Graduation Type | Soft Edge |
Density | 0.9 (3-Stop) |
Rectangular Size | 3.9 x 5.9" / 100 x 150 mm |
Coatings | Multi-Coating |
Filter Thickness | 0.08" / 2 mm |
Filter Material | Glass |
Packaging Info
Package Weight | 0.47 lb |
Box Dimensions (LxWxH) | 7.1 x 5 x 0.8" |
Haida Microfiber Chamois Lens Filter Cleaning Cloth Specs
Packaging Info
Package Weight | 0.05 lb |
Box Dimensions (LxWxH) | 5.8 x 4 x 0.8" |
Haida M10 Filter Bag Specs
Filter Capacity | 9 x 4 x 6" / 100 x 150 mm |
Type of Closure | Zipper |
Exterior Material | Nylon, Suede |
Interior Material | Nylon |
Exterior Dimensions | 8.7 x 5.5 x 6.3" / 220.0 x 140.0 x 160.0 mm |
Weight | 11.99 oz / 340 g |
Packaging Info
Package Weight | 0.84 lb |
Box Dimensions (LxWxH) | 8.7 x 5.65 x 4.9" |
In the Box
- 2-Year Manufacturer Warranty
- Plastic Case
- 2-Year Manufacturer Warranty
- Filter Case
- Light-Blocking Gasket
- 2-Year Manufacturer Warranty
- Filter Case
- Light-Blocking Gasket
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found