This from NiSi includes five filters that can be used individually or in various combinations to improve the results of your photography by preventing overexposure, as well as a circular polarizer to prevent distracting reflections or glare, plus an additional filter to reduce the appearance of light pollution in video or images that include the night sky and illumination from artificial light sources.
To allow these filters to be placed in front of a lens, this kit contains a V6 Pro 100mm Filter Holder that is designed to allow for the convenient use of up to three 100mm wide, 2mm thick filters along with the included circular polarizer.
A padded pouch is included for storage and transport, as well as an air blower, microfiber cleaning cloth, carbon-compound cleaning eraser, and a dust cap that can be used to protect the front surface of the circular polarizer while it is mounted on a lens.
The NiSi V6 Pro 100mm Filter Holder allows for the convenient use of up to three 100mm wide, 2mm thick filters along with an included NiSi 86mm Enhanced Circular Polarizer Filter. This aluminum alloy filter holder is pre-installed with three pairs of plastic filter slots, a configuration that accommodates three rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges. Contact with a filter's front or rear-facing surfaces is avoided, particularly when using graduated filters, whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.
The NiSi 86mm Enhanced Circular Polarizer Filter helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage. It is also designed to provide a saturation effect that is approximately 25% greater than a NiSi 86mm Circular Polarizer for select NiSi filter holder kits. The enhanced circular polarizer filter is constructed from optical glass for clarity and features an aluminum alloy filter ring for durability while remaining lightweight.
The NiSi 100 x 150mm Nano Medium-Edge Graduated IRND 0.9 Filter is a rectangular filter that helps to darken specific areas of an image such as bright skies while allowing for a normal, unaffected exposure in the other regions of the image. The filter is densest at the edge and tapers to clear by the middle, with a medium-edged line of transition between the dense and clear areas. A neutral density filter with a medium-edged line of transition can filter the sky while minimizing its effect on the land. It is particularly useful for images that include elements like rooftops and mountains that protrude into the sky. Neutral density filters do not affect the coloration of the image and this filter provides up to a 3-stop reduction in light from entering the lens.
The Nano Hard-Edge Reverse-Graduated IRND 0.9 to 0.15 Filter from NiSi can be applied to darken bright skies, specifically during a sunrise or sunset, while allowing for a normal, unaffected exposure in the other regions of the image.
The NiSi 100 x 100mm Nano IRND 0.9 Filter is an ND filter with an 8x filter factor that provides a 3-stop exposure reduction. Its 0.9 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By slowing your exposure time or increasing your aperture, you can control the depth of field and convey movement more easily. Neutral density filters are intended to not affect the coloration of the image and are ideal for pairing with other filters.
The NiSi 100 x 100mm Nano IRND 1.8 Filter is an ND filter with a 64x filter factor that provides a 6-stop exposure reduction. Its 1.8 density also creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required.
The NiSi 100 x 100mm Nano IRND 3.0 Filter is an ND filter with a 1000x filter factor that provides a 10-stop exposure reduction. Its 3.0 density also creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required.
The NiSi 100 x 100mm Natural-Night Filter is designed to reduce the appearance of light pollution in images or videos that include the night sky and illumination from artificial light sources. This effect can be obtained when this filter is used on a film camera system with daylight film installed, or on a digital camera system with its daylight white balance setting selected.
The NiSi 100mm Filter Pouch PLUS for 9 Filters is designed to provide a secure and convenient transport and storage solution for a combination of up to four NiSi 100 x 100mm and five 100 x 150mm filters. Filters placed within this pouch are each held within one of nine nonabrasive slots. They can be easily accessed by opening the pouch's touch-tab fastened front flap.
When photographing with a tripod, a loop along the rear of the NiSi 100mm Filter Pouch PLUS for 9 Filters allows it to be secured to one of the tripod's legs, putting your filters in more immediate reach. This pouch's exterior is woven from canvas for durability and a detachable strap provides the ability to carry it alongside or across the body.
- Durable aluminum alloy filter holder provides three pairs of filter slots, a configuration that accommodates up to three separately available 100mm wide, 2mm thick filters
- Each slot is designed to grip an installed filter only along the surface of the filter's edges, avoiding contact with a filter's front or rear-facing surfaces
- Use of the filter holder can be easily accomplished by first screwing the included 82mm adapter ring onto a lens with 82mm front filter threads
- Included step-up rings allow 82mm adapter ring to be used with lenses that have 67mm, 72mm, or 77mm front filter threads
- Additional step-up rings are separately available for lenses with 49mm, 52mm, 58mm, or 62mm front filter threads
- Pull-and-release locking pin on filter holder allows for a reliable connection to the 82mm adapter ring, which allows the holder to be rotated 360°
- 82mm adapter ring accommodates included NiSi 86mm Enhanced Circular Polarizer Filter and allows it to rotate for adjustment of its effect
- When combined, filter holder and 82mm adapter ring allow for easy installation or removal of the circular polarizer
- Screw-in locking pin can be used to prevent any rotation of the filter holder, further securing the position of an installed filter
- Additional adapter rings are separately available for lenses with 86mm or 95mm front filter threads
NiSi 86mm Enhanced Circular Polarizer Filter
- Helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface
- Polarizing filters arrange, and filter, directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of the light
- Clears up haze in distant landscapes and provides more saturated, vivid colors
- Offers a saturation effect that is approximately 25% greater than a NiSi 86mm Circular Polarizer for select NiSi filter holder kits
- Strongest effect when used at a 90° angle from the sun
- Circular polarizers are ideal for use with digital cameras and autofocus lenses where a linear polarizer will often disrupt auto exposure and focus features
- 2.8x filter factor reduces exposure by 1.5 stops
- Constructed from optical glass for clarity
- Aluminum alloy filter ring for durability while remaining lightweight
NiSi 100 x 150mm Nano Medium-Edge Graduated IRND 0.9 Filter (3-Stop)
- 100 x 150mm graduated neutral density filter darkens bright areas of an image, such
Customer reviews
Recommendation for purchase
