VisibleDust EZ Sensor Cleaning Kit PLUS with VDust Plus, 5 Orange DHAP 1.6x Vswabs and Sensor Brush

The orange DHAP Vswabs V-shape design allows for ease of maneuverability within the camera chamber and corner to corner sensor cleaning. Its woven fabric design retains liquid well and prevents scratches as it cleans oil and water stains. The DHAP swab is only compatible with the VDust Plus liquid cleaner, not with other Visible Dust brand cleaners. The 1.6x DHAP orange Vswab is compatible with sensors up to 16mm. The sensor brush with its Super Charged Fibers (SCF) draws the dust away from the sensor and onto the bristles.

Kit contains 1.15 ml bottle of VDust Plus, 5 orange 1.6x DHAP Vswabs and one sensor brush

VDust Plus

• Removes water and oil stains
• Mild iso-alcoholic solution for non-specific stains on sensor
• Non streak formula and fast evaporation
• Provides moderate static barrier

• V-shape design allows for ease of maneuverability within the camera chamber
• V-shape design reaches the corners of sensors
• Woven fabric retains liquid well and prevents scratches
• This and extremely soft
• The orange DHAP Vswabs are only compatible with VDust Plus liquid cleaner, not with other Visible Dust brand cleaners.

• Super Charged Fibers (SCF) draws the dust away from the sensor and onto the bristles.

• The VisibleDust sensor cleaning solutions and swabs are calibrated to work together to produce optimal and safe results. Please do not use alternative solutions with this swab. Asimple grain of quartz which is found in cheaper solutions is enough to produce an expensive scratch on the low pass filter. These solutions are manufactured to the highest standard of quality that is practiced in pharmaceutical industries.

• VisibleDust solutions are calibrated for normal evaporative rates:
  To keep the swab moist at all time to reduce the risk of scratches
  To increase the cleaning power, less swabbing more economical
  To reduce friction by being moist all times during swabbing

• The potential risk of fast evaporative solutions used as sensor cleaning is the following:
  An increase in the risk of damage and stress to sensor coating by using premature dry swab
  Agreat reduction in cleaning power by shortening the contact time between contaminants and solution due to the increased evaporation rate of the solution
  An increase in friction by using a premature drying swab, resulting in static charge build up leading to an even greater dust accumulation on the sensor

• These cleaning liquids are intended to be placed on the swab first, so the concern for liquid seeping through the sensor is not valid or accurate. On the other hand, the disadvantages of a generic brand for fast evaporative liquid used for sensor cleaning may in fact cause damage to the sensor by requiring repeat swabbing and is not recommended.