Leofoto LS-223CEXX+LH-25 Overview
The Leofoto LS-223CEX X Ranger Carbon Fiber Table Tripod with Leveling Base & LH-25 Mini Ball Head provides an ergonomic way to support your camera for tabletop and low-angle capture. This ergonomic tripod has legs that can be set at 23, 55, and 85° angles using one hand. Combined, the tripod and head offer a 15.1" maximum height and 11.4 lb load capacity.
Leofoto LS-223CEX X Ranger Carbon Fiber Table Tripod with Leveling Base
Ideal for tabletop or low-angle capture, the 3-section LS-223CEX X Ranger Carbon Fiber Table Tripod with Leveling Base from Leofoto is a 12.4" , compact carbon fiber tripod. Its flat base has a 3/8" -16 screw and features an integrated leveling base that enables you to quickly level your camera rig without adjusting each tripod leg.
Built-In Leveling Base
An integrated leveling base with a range of -15 to +15° lets you quickly level your camera.
NOTE: This leveling base cannot be removed from the tripod.
Three Leg-Angle Positions
Three leg angles of 23, 55, and 85° provide quick positioning when setting up the tripod.
Carbon Fiber Legs
The tripod legs are built from 10-layer Toray carbon fiber to reduce vibrations and increase strength and stability.
Leofoto LH-25 Mini Ball Head with Quick Release Plate
Made of aluminum with an anodized finish for durability, this LH-25 Mini Ball Head from Leofoto uses a screw-knob clamp at its top to attach to most Arca-type plates. It is made to support gear as heavy as 13.23 lb for 360° panning and has a cutout notch at its base to enable 90° tilting in one direction.
The ball head boasts a compact design, with a fixed height of 2.6" , a ball diameter of 25mm, and a weight of 6 oz, that makes it easy to travel with and use. A single lever is available for adjusting head position, which pulls out to enable control and fits back in to lock everything in place. The LH-25 has a 3/8" -16 bottom mount and comes with a 3/8" to 1/4" bushing reducer, allowing you to mount it to tripods with either thread size.
- Supports gear as heavy as 13.23 lb, enabling 360° panning and 90° tilting
- Uses screw-knob clamp to attach to most Arca-type tripod plates
- Compact design with a height of 2.6" , a 25mm ball diameter, and a weight of 6 oz
- Goes on tripods with a 3/8" -16 mount, with a bushing adapter available for those with 1/4" screws
| Head Mount Type | 3/8"-16 Male |
| Primary Leg Material | Carbon Fiber |
| Load Capacity | 11 lb / 5 kg |
| Maximum Working Height | 12.44" / 31.60 cm |
| Minimum Working Height | 3" / 7.6 cm |
| Closed Length | 8.5" / 21.7 cm |
| Weight | 1.3 lb / 610 g |
Legs
| Head Mount Type | 3/8"-16 Male |
| Primary Leg Material | Carbon Fiber |
| Leg Lock | Twist Lock |
| Leg Sections | 3 |
| Independent Leg Spread | Yes |
| Leg Positions | 3 Positions |
| Foot Features | Removable |
General
| Load Capacity | 11 lb / 5 kg |
| Maximum Working Height | 12.44" / 31.60 cm |
| Center Column | No |
| Minimum Working Height | 3" / 7.6 cm |
| Closed Length | 8.5" / 21.7 cm |
| Accessory Mounting | 1x 1/4"-20 Female Thread |
| Bubble Level | No |
| Detachable Monopod | No |
| Spreader Support | No |
| Weight | 1.3 lb / 610 g |
Leofoto LH-25 Mini Ball Head with Quick Release Plate Specs
| Camera Mounting Screw | 1x 1/4"-20 Male with Retractable 3/8"-16 Sheath |
| Camera Plate | Quick Release: Arca-Type |
| Head Type | Ball Head |
| Load Capacity | 13.2 lb / 6 kg |
| Weight | 6.1 oz / 172 g |
Camera Attachment
| Camera Mounting Screw | 1x 1/4"-20 Male with Retractable 3/8"-16 Sheath |
| Camera Plate | Quick Release: Arca-Type |
Head
| Head Type | Ball Head |
| Base Mount | Flat Base with 3/8"-16 Female |
| Counter Balance | No |
Pan & Tilt
| Vertical Tilt | 90° |
General
| Load Capacity | 13.2 lb / 6 kg |
| Bubble Level | No |
| Weight | 6.1 oz / 172 g |
Packaging Info
| Package Weight | 0.6 lb |
| Box Dimensions (LxWxH) | 4.2 x 3.9 x 3.7" |
In the Box
- Carrying Case
- 10-Year Manufacturer Warranty
- 3/8" to 1/4" Bushing Reducer
- 10-Year Manufacturer Warranty
No posts found
