Leofoto LS-223CX Mini Carbon Fiber Tripod with LH-25 Mini Ball Head

Leofoto Ranger LS-223CX Overview

The LS-223CX Mini Carbon Fiber Tripod with LH-25 Mini Ball Head from Leofoto outfits you with a compact carbon fiber tripod and a ball head with an Arca-type quick release plate. The entire system can support rigs up to 13.23 lb. The mini ball head features a quick release plate and a screw knob clamp to attach to most Arca-type plates.

Leofoto LH-25 Mini Ball Head with Quick Release Plate

Made of aluminum with an anodized finish for durability, this LH-25 Mini Ball Head from Leofoto uses a screw-knob clamp at its top to attach to most Arca-type plates. It is made to support gear as heavy as 13.23 lb for 360° panning and has a cutout notch at its base to enable 90° tilting in one direction.

The ball head boasts a compact design, with a fixed height of 2.6" , a ball diameter of 25mm, and a weight of 6 oz, that makes it easy to travel with and use. A single lever is available for adjusting head position, which pulls out to enable control and fits back in to lock everything in place. The LH-25 has a 3/8" -16 bottom mount and comes with a 3/8" to 1/4" bushing reducer, allowing you to mount it to tripods with either thread size.

• Supports gear as heavy as 13.23 lb, enabling 360° panning and 90° tilting
• Uses screw-knob clamp to attach to most Arca-type tripod plates
• Compact design with a height of 2.6" , a 25mm ball diameter, and a weight of 6 oz
• Goes on tripods with a 3/8" -16 mount, with a bushing adapter available for those with 1/4" screws

Leofoto LS-223CX Mini Carbon Fiber Tripod

The LS-223CX Mini Carbon Fiber Tripod from Leofoto is a durable, compact carbon fiber tripod capable of supporting loads up to 22 lb while maintaining a lightweight form factor. The legs themselves have a 2.6 to 11.8" working height range that can be adjusted using the three leg sections and twist locks. The tripod can achieve such a low minimum height due to the legs' independent spread. Both 3/8" -16 and 1/4" -20 convertible mounting screws can secure separately available video heads to the tripod. A 1/4" -20 accessory thread can accommodate articulating arms for a secondary monitor, microphone, or LED light.