3 Legged Thing Albert 2.0 Tripod (Gray)

This gray 3 Legged Thing Albert 2.0 Tripod is a support system that features three detachable legs and a removable center column. Each leg can be configured as a monopod with up to a 49.4" height or can be combined with the center column to form a monopod with up to 74.6" in height.

Tripod heads that are compatible with a 3/8" -16 mount can be connected to the top of the Albert 2.0 Tripod. When configured as a tripod, the Albert 2.0 Tripod supports up to 66.0 lb and measures 16.9" when folded. Each of its 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set at a minimum height of 4.7" when its 3-section, push-and-pull rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 48.0" or 71.6" with the center column fully raised. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Albert 2.0 Tripod s three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.

Use and Handling

• Support system with three detachable legs and removable center column
• Each leg can be configured as a monopod with up to a 49.4" height or can be combined with the center column to form a monopod with up to 74.6" height
• As a tripod, supports up to 66.0 lb
• Push-and-pull center column for rapid camera, lens, or sport optic positioning
• Center column D-ring to accommodate ballast for additional stability
• Can be set for a minimum height of 18.9" or 4.7" without the center column
• All three legs can be extended in the tripod configuration to obtain a maximum height of 48.0" or 71.6" with the center column fully raised
• Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod s legs instead of above them
• Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
• Legs can be locked at 23, 55, or 80° angles
• Rubber feet help to enhance stability on a wide variety of surfaces
• Weighs 4.1 lb and measures 16.9" when all three legs are reversed 180° and folded
• Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
• Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
• 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
• Carry bag with strap for storage and transport

Construction Details

• Carbon-fiber legs
• 3/8" -16 mount