The metallic slate gray 3 Legged Thing Mike Carbon Fiber Tripod Legs with Quick Leveling Base is part of the Legends range and is for flat-base tripod heads with either a 1/4" -20 or 3/8" -16 threaded mounting hole. It is a carbon fiber leveling-base tripod, with friction control on the underside to finely adjust the position of the leveling base. The 3-section removable legs have a height range of 5.3 to 58.1" and are made from eight layers of carbon fiber and feature twist-lock leg locks with an improved shim system for greater strength.
The Rapid-Latch Angle adjustment system allows you to quickly set the angle of each leg independently, even when wearing gloves. All three legs are detachable, allowing you to use the quick leveling system, with optional accessories, as the base for a high hat for low-angle shots, or for working on a tabletop setup. Each detached leg can be used as a monopod or as a boom arm.
Detachable Legs
With three detachable legs, the Mike tripod can be converted to a tabletop tripod by using optional 3LT footwear, and the legs can be used as monopods or boom arms.
Leveling Base with Friction Adjustment
The leveling base incorporates a bubble level and allows you to quickly level your head on the tripod, even when working on uneven terrain. A D-ring on the bottom of the base enables attaching a weight to the legs for increased stability and also allows you to adjust the friction on the leveling base.
Rapid-Latch
The Rapid-Latch angle adjustment system was designed to be easy to use, even for those with impairments or those wearing thick gloves.
Leg Locks
The twist-lock leg locks feature 3 Legged Thing s O-Pads, which provide improved grip, torque, and water dispersal.
Replaceable Feet
Detachable rubber " Bootz" can be replaced with a variety of foot accessories for maximum stability on any terrain.
3 Legged Thing MIKE Specs
General
| Load Capacity | 30.86 lb / 14 kg |
| Head Mount Type | 1/4"-20 Male, 3/8"-16 Male |
| Maximum Working Height | 58.1" / 147.5 cm |
| Minimum Working Height | 5.3" / 13.5 cm |
| Closed Length | 26.3" / 66.7 cm |
| Materials | Carbon Fiber |
| Weight | 3.64 lb / 1.65 kg |
Legs
| Leg Lock Type | Twist Lock |
| Leg Positions | 3 Positions |
| Independent Leg Spread | Yes |
| Leg Sections | 3 |
| Leg Diameter | 1.1" / 29 mm (Maximum) 1" / 26 mm 0.9" / 23 mm (Minimum) |
| Bubble Level | Yes |
| Feet Features | Rubber, Removable |
Detachable Monopod
| Maximum Working Height | 61.0" / 155 cm |
| Leg Sections | 3 |
| Monopod Foot Features | Removable, Rubber |
Packaging Info
| Package Weight | 5.61 lb |
| Box Dimensions (LxWxH) | 27.7 x 5.2 x 5" |
In the Box
- 3 Legged Thing Mike Carbon Fiber Tripod Legs with Quick Leveling Base (Metallic Slate Gray)
- Carry Strap
- Carry Bag with Carabiner Clip and Storage Pocket
- 5-Year Manufacturer Warranty
No posts found
