The LS-254CX Carbon Fiber Tripod from Leofoto is a durable carbon fiber tripod capable of supporting up to 17.6 lb camera rigs while maintaining a lightweight form factor. The legs themselves have a 3.3 to 46.7" working height range that can be adjusted using the four leg sections and twist locks. The tipod can achieve such a low minimum height due to the legs' independent spread with three angle stops at 23, 55, and 85°.
Both 3/8"-16 and 1/4"-20 convertible mounting screws can secure separately available video heads to the tripod. A 1/4"-20 accessory thread can accommodate articulating arms for a secondary monitor, microphone, or LED light. A removeable ballast hook allows you to integrate counterweights to better support larger rigs. Transport the tripod to set with the included carrying case.
Leofoto Ranger LS-254CX Specs
| Head Mount Type | 1/4"-20 or 3/8"-16 Male |
| Primary Leg Material | Carbon Fiber |
| Load Capacity | 17.6 lb / 8 kg |
| Maximum Working Height | 46.65" / 118.49 cm |
| Minimum Working Height | 3.5" / 8.8 cm |
| Closed Length | 17.3" / 44 cm |
| Weight | 2.03 lb / 0.92 kg |
Legs
| Head Mount Type | 1/4"-20 or 3/8"-16 Male |
| Primary Leg Material | Carbon Fiber |
| Leg Lock | Twist Lock |
| Leg Sections | 4 |
| Independent Leg Spread | Yes |
| Foot Features | Removable |
General
| Load Capacity | 17.6 lb / 8 kg |
| Maximum Working Height | 46.65" / 118.49 cm |
| Center Column | No |
| Minimum Working Height | 3.5" / 8.8 cm |
| Closed Length | 17.3" / 44 cm |
| Accessory Mounting | 1x 1/4"-20 Female Thread |
| Bubble Level | No |
| Detachable Monopod | No |
| Spreader Support | No |
| Weight | 2.03 lb / 0.92 kg |
In the Box
- Leofoto LS-254CX Carbon Fiber Tripod
- Carrying Case
- Lifetime Warranty
No posts found
