ProMediaGear TR343 34mm Series 51" Pro-Stix Carbon-Fiber Tripod with Top Plate

ProMediaGear TR343 Overview

This TR343 34mm Series 51" Pro-Stix Carbon-Fiber Tripod from ProMediaGear supports up to 60.0 lb, measures 22.1" when folded, and includes a tripod top plate with a 3/8" -16 mount. Each of its 3-section legs has a maximum diameter of 34mm. They also feature an independent spread, a 3-position angle lock, quarter-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 3.8" to a maximum height of 51.0" . For use on soft and uneven soil, each of the rubber feet can be unscrewed to access a stow-away metal spike which can be fastened to the bottom of its corresponding foot.

Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8" -16 mount can be connected to the tripod's removable top plate, which is secured to the tripod's aluminum-alloy apex using six socket screws. The aluminum-alloy apex minimizes weight along with the carbon-fiber construction of the tripod legs.

Alternatively, a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with a separately-available TRB3475 75mm Tripod Bowl Insert can be installed within the aluminum-alloy apex. A video tripod head that is directly compatible with the TRB3475 tripod bowl insert or the TRBU75 tripod leveling base's 3/8" -16 mount can be used with the TR343 34mm Series 51" Pro-Stix Carbon-Fiber Tripod and oriented without adjusting the tripod's legs.

For direct attachment of accessories that feature 1/4" -20 mounts such as the included bubble level, three 1/4" -20 female accessory threads are distributed along the sides of the apex. Alongside each of those 1/4" -20 accessory threads are pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4" -20 mount. To enhance stability, the underside of the top plate features an accessory loop which can accommodate the included carabiner along with a separately-available ballast such as a sandbag.

Use and Handling

• Supports up to 60.0 lb
• Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8" -16 mount can be connected to the included tripod top plate, which is secured to the tripod's apex using six socket screws
• Alternatively, tripod accepts a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with separately-available TRB3475 75mm Tripod Bowl Insert
• A video tripod head that is directly compatible with a separately-available ProMediaGear TRB3475 75mm Tripod Bowl Insert or the 3/8" -16 mount of the separately-available TRBU75 75mm Tripod Leveling Base can be used with the tripod and oriented without adjusting the tripod's legs
• Can be set for a minimum height of 3.8" to a maximum height of 51.0"
• Legs each feature 3 sections, twist locks for rapid deployment, and can be independently spread
• Legs can be locked at 22.5° , 55.0° , or 89.0° angles
• Rubber feet with stow-away, metal spikes to further enhance stability on a wide variety of surfaces, including soft and uneven soil
• Included tripod bubble level
• For direct attachment of accessories that feature 1/4" -20 mounts, three 1/4" -20 female accessory threads distributed along the sides of the apex
• 1/4" -20 accessory threads along the apex have adjacent pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4" -20 mount
• Underside of the top plate features an accessory loop which can accommodate the included carabiner along with a separately-available ballast such as a sandbag
• Weighs 3.7 lb, measures 22.1" when folded
• 5/32 hex key to adjust tension on leg hinges and for removal or installation of tripod top plate

Construction Details

• Carbon-fiber legs with a maximum diameter of 34mm
• Aluminum-alloy tripod apex helps minimize weight

EAN: 609456714587